CS Paper Radar

ST-CGMDiff: Sparse-Conditioned Cross-Frequency Spatio-Temporal Latent Diffusion for Dynamic 3D Channel Gain Map Reconstruction

Tianxiang Li, Yilong Chen, Han Hu, Yong Zeng, Jie Xu

eess.SP ·submitted 2026-11-04 09:30 UTC · v1

Abstract

Accurate and efficient reconstruction of channel gain maps (CGMs) is essential for environment-aware wireless communications. Unlike prior works that focus on static CGMs at a single frequency band, this paper studies the construction of dynamic three-dimensional (3D) CGMs across multiple frequency bands over consecutive time slots, using limited channel measurements. Specifically, for a given transmitter (Tx) location, we represent the CGM at any given receiver (Rx) height as a two-dimensional (2D) grayscale image, where each pixel indicates the average channel gain over the corresponding Rx spatial grid cell. Accordingly, we propose ST-CGMDiff, a spatio-temporal latent diffusion framework that integrates sparse-observation conditioning and cross-frequency modeling to reconstruct dynamic 3D CGMs across multiple carrier frequencies and varying Rx heights within a unified model. In this framework, we jointly encode the input parameters, including the current sparse observations, observation masks, physical Tx and Rx z-coordinates, and carrier frequencies as spatial conditions. A frequency-conditioned convolutional gated recurrent unit (ConvGRU) then extracts causal information from previously constructed CGMs, while a spatially adaptive fusion mechanism balances historical information and current observations. Furthermore, bidirectional convolutional long short-term memory (BiConvLSTM) modules are introduced to capture the ordered dependencies among the selected Rx z-layers. Finally, we perform few-step latent diffusion followed by high-resolution residual refinement to generate the final CGM with improved spatial fidelity.

Closest papers

Nearest neighbours by meaning across the whole index.

DyRadio: Spatiotemporal Diffusion for Dynamic Radio Map Reconstruction

cs.LG cs.AI ·2026-11-01 ·Zhijie Fan, Zhifeng Zhao, Rongpeng Li
similarity 0.62
Abstract · 13 pages, 7 figures, 8 tables

Accurate radio map (RM) reconstruction is essential for environment-aware wireless networks. Sampling-based methods, which infer radio conditions from sparse measurements, are widely adopted because they do not require explicit knowledge of transmitter configurations. However, in dynamic environments, time-varying propagation conditions cause RMs to evolve, complicating reconstruction from temporally distributed sparse observations. Although cross-frame observations provide complementary spatial information, their direct aggregation can introduce temporal state mismatch. Furthermore, unknown measurement noise adds to the reconstruction difficulties. To address these challenges, we propose DyRadio, a framework that integrates spatiotemporal RM reconstruction with unknown noise estimation. Specifically, a propagation-prior-guided, noise-conditioned spatiotemporal diffusion model (DM) jointly reconstructs consecutive RMs by capturing cross-frame dependencies, while adapting to measurement noise levels. To estimate the noise level, an iterative predictive likelihood method alternates between DM-based blind-area prediction and noise-level updates. The estimated noise level then conditions reconstruction of the complete RM sequence. Experimental results demonstrate superior reconstruction accuracy and robustness against measurement noise, with peak signal-to-noise ratio (PSNR) improvements of 1.18-5.75 dB over the best-performing baseline across all evaluated settings.

0.21

HarmoCore: Functional Latent Diffusion for Sparse Reconstruction of Oscillatory Wave Fields

cs.LG cs.CE ·2026-09-01 ·Lihao Chen, Xinyu Zhang, Panqi Chen, Lei Cheng, Ting Zhang +2 more
similarity 0.57
Abstract · 15pages, 8figures

Reconstructing oscillatory wave fields from scattered sensors is a severely underdetermined inverse problem. Beyond the challenges of general physical-field reconstruction, wave responses are complex-valued, frequency-sensitive, and highly oscillatory, while costly simulation and sensing often leave only extreme-sparse observations. Existing low-rank, operator, and diffusion approaches are largely designed for real-valued, smoother fields; dense pixel-space diffusion is particularly inefficient for oscillatory complex fields and difficult to scale to 3D. We propose HarmoCore, which places a generative prior in a compact, continuous, and structured wave-field latent. HarmoCore represents joint real--imaginary channels with Functional Tucker cores over shared continuous spatial bases, learns a frequency-conditioned core diffusion prior, and performs Diffusion Posterior Sampling directly in core space. At fixed sensor coordinates, the multilinear decoder induces an explicit likelihood guidance operator, avoiding dense pixel-space correction. Optional target-equation residual guidance further promotes physical consistency. Experiments on 2D Helmholtz, 2D synthetic wave fields, and 3D Helmholtz show substantial gains under 1%--2% sensing while remaining practical in three dimensions.

0.16

JEPA-Inspired Latent Field Prediction for Sparse-Pilot MIMO-OFDM Channel Reconstruction

eess.SP cs.AI ·2026-10-27 ·Yuzhi Yang, Brahim Mefgouda, Hang Zou, Lina Bariah, Anis Bara +3 more
similarity 0.57
Abstract

Accurate acquisition of full channel state information (CSI) is essential for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) wireless systems, while dense pilot-based estimation incurs substantial overhead. Directly minimizing the prediction error over raw CSI coefficients is fragile in realistic propagation environments, since small-scale fading, mobility, local scattering, and small spatial perturbations can induce large phase-sensitive variations. Nevertheless, wireless channels contain strong spatial, temporal, and frequency-domain correlations that can be more predictably represented in a latent propagation-field domain. Motivated by this observation, we propose a joint-embedding predictive architecture (JEPA)-inspired field world model, defined as a latent predictive model of the wireless propagation field, for sparse-pilot channel reconstruction. The model maps CSI observations into latent time-frequency tokens, predicts masked or future latent field states from historical multi-band context, and fuses the predicted latent prior with sparse noisy current pilots to reconstruct the full MIMO-OFDM channel. Ray-tracing experiments show that the proposed method improves normalized mean square error (NMSE) over pilot-only and direct reconstruction baselines, supporting latent field prediction as an effective prior for sparse-pilot channel acquisition.

0.10

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.57
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

Environment-Aware Diffusion Model for Massive MIMO-OFDM Channel Estimation

eess.SP ·2026-09-15 ·Wanchen Hu, Jie Yang, Yi Song, Jun Xia, Shuangyang Li +2 more
similarity 0.56
Abstract

This paper proposes an environment-aware diffusion based channel estimation in massive multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. The high dimensionality of massive MIMO channels combined with limited pilot resources makes accurate estimation challenging. To address this issue, we exploit the spatial variability of wireless channels by training a diffusion model to learn the location-conditioned distribution of channel state information, which provides an environment-aware prior for channel estimation. Based on this learned prior, a posterior inference algorithm is developed to incorporate pilot observations into the reverse diffusion process, enabling Bayesian channel estimation by combining the received-signal likelihood with the learned channel prior. By jointly leveraging location information and measurement data, the proposed approach improves estimation accuracy under limited pilot resources. Simulation results based on ray-tracing channel datasets demonstrate that the proposed method consistently outperforms conventional estimators and existing learning-based approaches across various signal-to-noise ratios and pilot configurations.

0.39

3D Gaussian Splatting: A New Paradigm for Wireless Environment Representation

eess.SP ·2026-10-31 ·Jinya Zhang, Jiajia Guo, Chao-Kai Wen, Shi Jin
code/data similarity 0.56
Abstract · A collection of paper on 3DGS for Wireless Communications can be found at https://github.com/AI4Wireless/3DGS_for_Wireless

Wireless channels are shaped by the surrounding propagation environment, making explicit environment representation an effective approach for characterizing channels. By combining explicit environment modeling with learnable radio frequency characteristics, 3D Gaussian splatting (3DGS) emerges as a new paradigm for wireless environment representation. This article establishes a systematic perspective on 3DGS-enabled wireless communications in terms of environment representation. We first clarify the rationale for extending 3DGS from visual scene modeling to wireless communications and formulate a unified framework for wireless environment representation. Building on this framework, we further investigate the applicability of 3DGS-based representations to a broad range of communication and sensing tasks, and characterize key considerations for practical deployment. Finally, emerging directions are highlighted, including cross-scene generalization, near-field channel modeling, real-world data collection, and lifecycle management.

0.43

SNR-Gated LSTM-Conditioned Diffusion Model for MIMO Channel Estimation

cs.LG eess.SP ·2026-10-06 ·Jixing Zhou, Xinming Huang
published similarity 0.56
Abstract · 5 pages, 5 figures. Accepted by and presented at the 2026 IEEE 104th Vehicular Technology Conference (VTC2026-Fall)

Accurate and low latency channel estimation is critical for modern MIMO systems, particularly under mobility, where channels exhibit structured sparsity and strong temporal correlation. This paper proposes a time-series conditioned diffusion framework for channel estimation that performs denoising in the angular domain. Starting from least squares (LS) observations, we train a diffusion denoiser whose conditioning information is encoded by a long short-term memory (LSTM) network over a short observation sequence, enabling the model to exploit temporal dynamics beyond per-snapshot estimation. To robustly balance observation fidelity and learned generative priors across a wide signal-to-noise ratio (SNR) range, we introduce a learnable SNR-gated late-fusion shortcut that injects the network input into the final decoding stage through a sigmoid gate with trainable center and scale. To reduce inference latency, we adopt deterministic denoising diffusion implicit model (DDIM) style reverse updates with SNR-adaptive truncation and step allocation, which significantly reduces the number of reverse diffusion steps at high SNR while maintaining strong performance in low SNR regimes. Simulations on time-evolving standardized channel models demonstrate that the proposed method achieves consistent performance gains over existing diffusion-based channel estimation baselines, while retaining low latency through SNR-adaptive inference.

0.32

MIMO-OFDM AI Receiver Based on Incrementally Conditioned Diffusion with Soft Decision

eess.SP ·2026-09-22 ·Weijie Zhou, Zhaoyang Zhang, Zhixian Kong, Zhaohui Yang
similarity 0.55
Abstract

Conventional iterative receiver usually begins with channel estimation using sparse pilot observations and follows with data detection based on the channel estimates, and then updates channel estimation using decision feedback, and so on. In Artificial Intelligence (AI)-based receiver design, it is also crucial to make use of such progressively enriched data observations to enhance the generative channel estimation. However, the statistical characteristics and reliability of the data decisions always evolve with the channel estimation processes, which brings great challenges to the design of the overall learning framework and algorithms. In this paper, we propose \textit{Diff-Rx}, an incrementally conditioned diffusion-based receiver with co-designed data detection and channel estimation, for multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. Specifically, we develop a condition-adaptive post-training method which enables the generative channel estimator to adapt to the conditioning inputs that are progressively enriched by soft data decisions, and also to implicitly align the pilot- and data-induced channel feature spaces to mitigate potential estimation errors. The threshold-free soft decisions provide smooth condition updates without condition-specific reliability tuning. We further develop a conditional diffusion transformer that is capable of performing robust channel estimation under noisy observations and various pilot patterns while reducing the conventional multi-step diffusion generation to one single step. Simulations on both statistical and site-specific ray-tracing channels show that, Diff-Rx exhibits consistent gains across different noise levels, pilot densities and modulation schemes, and works well at a pilot density as low as 1/32 while achieving significant improvement in channel estimation and data detection performances.

0.34