CS Paper Radar

From Sparse Probes to Sum-Rate Maximization: Electromagnetic Twin Beamforming

Tuo Wu, Kangda Zhi, Jie Tang, Jianchao Zheng, Naofal Al-Dhahir, Fumiyuki Adachi

eess.SP ·submitted 2026-08-21 08:09 UTC · v1

Abstract

Probing every candidate location at each wireless-map update is costly. This letter develops electromagnetic-twin (ET) beamforming that converts sparse spatial probes into a sum-rate decision. The ET stores a location-dependent angular power spectrum, updates its innovation through graph-regularized estimation, and queries user covariances for projected beam optimization. A rate-sensitivity bound selects subsequent probes by query-weighted posterior-variance reduction. With 1\% random probes, ET beamforming achieves $2.69$ bit/s/Hz versus $1.12$ for a static channel knowledge map; with 7\% query-aware probes, it reaches $3.03$ bit/s/Hz, within 3.4\% of perfect-covariance beamforming.

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.64
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

Electromagnetic Twin: From Sparse Measurements to Persistent Wireless Intelligence

eess.SP ·2026-08-25 ·Tuo Wu, Lifeng Mai, Jie Tang, Shihang Lu, Kangda Zhi +5 more
similarity 0.59
Abstract

Radio maps and channel knowledge maps provide reusable propagation knowledge, but a stored map can become locally outdated after persistent changes to doors, partitions, furniture, large equipment, or infrastructure. Motivated by digital-twin state synchronization, we develop an electromagnetic twin that recurrently converts sparse channel measurements into a persistent wireless state, exposes that state to communication queries, and uses its uncertainty to request subsequent measurements. The twin tracks persistent or semi-persistent propagation changes rather than transient human motion or fast fading. Each update is a constrained inverse problem that combines the previous map, a scene graph, and an imperfect physics prior. Measurement consistency with a confidence-calibrated radius and physical gain bounds enforce feasibility, while scene-aware spatial regularization and selective temporal memory preserve propagation boundaries and unchanged regions. Successive convex approximation (SCA), majorization--minimization alternating direction method of multipliers (MM-ADMM), and a low-complexity primal--dual hybrid gradient (LC-PDHG) mode realize the framework at different computational scales, and a local perturbation analysis gives an explicit multi-update tracking recursion. The updated state supports access-point association and codebook beam selection, while change-weighted A-optimal design closes the measurement--update--query loop. Over 500 realizations, the recurrent update remains stable through eight persistent scene events and raises best-beam accuracy from $76.64\%$ to $90.83\%$ as measured-location density grows from $2\%$ to $16\%$.

0.27

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.57
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.56
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

How Much Training is Needed with a Digital Twin?

eess.SP eess.SY ·2026-09-01 ·Ahmad Bazzi, Marwa Chafii
similarity 0.56
Abstract

The following paper addresses how much pilot training is needed when a digital twin (DT) of the wireless radio channel is available to aid a wireless communication system with a channel estimation task. The DT of a wireless channel is widely expected to reduce the pilot overhead of channel estimation, following the informal rule that \emph{``the more accurate the twin, the fewer pilots are needed.''} This trade-off, however, has only ever been demonstrated empirically and never quantified. We close this gap by treating the DT as a complementary measurement of the channel that the receiver fuses with its pilot observations in the physical world. Consequently, fusing the physical and digital worlds through the best linear unbiased estimator, we derive a DT-aided Cramér-Rao bound, and from it a \emph{pilot-equivalence law} that converts DT fidelity into an equivalent number of training symbols. For a biased twin unknown to the estimator, we obtain the exact mismatch threshold beyond which trusting the DT is worse than ignoring it. We quantify how much training is needed with the DT to attain a desired mean square error on channel estimation. Particular cases are discussed to tell when training in the physical world can be completely bypassed. We finally translate these results into a block-fading achievable rate whose optimal training length is the unique root of a single equation, and identify the DT fidelity above which pilot training can be dispensed with altogether. Extensive numerical results corroborate closed-form expression and reveal that the value of a DT is largest at finite signal-to-noise ratio and vanishes in both the low- and high-SNR limits.

0.46

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.56
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Electromagnetic-Twin Channel Estimation: From Sparse Pilots to Persistent CSI

eess.SP ·2026-08-21 ·Tuo Wu, K. C. Ho
similarity 0.56
Abstract

Each repeated pilot block is typically treated as a separate channel-estimation problem, although much of the angle--delay state persists across updates. This paper defines an electromagnetic twin (ET) as a recursively synchronized signal-processing state containing channel state information (CSI), coefficientwise uncertainty, support confidence, and age. A channel knowledge map may initialize this state; subsequent pilots predict, correct, validate, and store the state. We formulate an anchored-window inverse problem that yields online uncertainty-weighted correction and fixed-lag smoothing as two convex operating modes of a persistent-state estimator. Uncertainty-aware ET FISTA (UET-FISTA) gives a zero-delay update, while an alternating direction method of multipliers (ET-ADMM) jointly refines a short window when delayed CSI is acceptable. Held-out pilots choose update, complete refresh, or hold under a prescribed family-wise false-acceptance probability, preventing an inaccurate stored state from being reused blindly. Conditional Bayesian Cramér--Rao bounds quantify the information supplied by the stored state and by future pilot blocks. With 20\% pilots, UET-FISTA reaches $-11.55$ dB normalized mean-square error, compared with $-3.42$ dB for static FISTA. Over 200 independent 50-epoch trajectories, three-epoch smoothing improves matched-state NMSE from $-10.28$ to $-13.41$ dB. On 40 off-grid QuaDRiGa trajectories, online UET-FISTA improves static recovery from $-1.37$ to $-1.88$ dB and effective rate from 1.688 to 1.919 bit/s/Hz. These results identify when persistent CSI reduces pilot demand and when the receiver should instead refresh or preserve its state.

0.54

RMSampler: Sparse Radio Map Reconstruction with Active Sampling and Diffusion Posterior Correction

eess.SP ·2026-10-20 ·Nan Cheng, Xiucheng Wang
similarity 0.55
Abstract

Reconstructing a radio map (RM) from sparse received-power measurements supports non-cooperative interference monitoring and spectrum management. However,sparse measurements leave uncertainty about both the global RM and the interfering emitter location, making informative sampling and accurate reconstruction challenging. To address these challenges, a novel joint sampling and reconstruction method named RMSampler is proposed in this paper to improve measurement selection and RM reconstruction under limited measurement budgets. For measurement selection, RMSampler evaluates global RM error reduction using the covariance of diffusion-generated RMs and localization error reduction using candidate emitter locations. Because these errors have different units, their expected relative reductions are combined into a scale-invariant sampling criterion, with each acquired measurement updating both uncertainty estimates. After sampling, the updated emitter-location probabilities guide a separate conditional diffusion ensemble for final reconstruction. To improve measurement agreement, an effective sample size (ESS) target guides robust posterior correction, followed by a minimum-distortion projection enforcing measurement and building constraints. For the reconstruction ensemble, analysis establishes that increasing likelihood power reduces expected robust measurement loss, while pretrained neural parameters and architecture remain unchanged. Experiments using simulated and real-world measured data demonstrate improved reconstruction under matched measurement budgets. In the Chongqing real-world measured data experiment, root mean square error (RMSE) decreases from 3.54 to 2.73~dB relative to random sampling under a common reconstruction method.

0.39