CS Paper Radar

Electromagnetic Twin: From Sparse Measurements to Persistent Wireless Intelligence

Tuo Wu, Lifeng Mai, Jie Tang, Shihang Lu, Kangda Zhi, Maged Elkashlan, Mérouane Debbah, Matthew C. Valenti, Fumiyuki Adachi, Hing Cheung So

eess.SP ·submitted 2026-08-25 11:41 UTC · v1

Abstract

Radio maps and channel knowledge maps provide reusable propagation knowledge, but a stored map can become locally outdated after persistent changes to doors, partitions, furniture, large equipment, or infrastructure. Motivated by digital-twin state synchronization, we develop an electromagnetic twin that recurrently converts sparse channel measurements into a persistent wireless state, exposes that state to communication queries, and uses its uncertainty to request subsequent measurements. The twin tracks persistent or semi-persistent propagation changes rather than transient human motion or fast fading. Each update is a constrained inverse problem that combines the previous map, a scene graph, and an imperfect physics prior. Measurement consistency with a confidence-calibrated radius and physical gain bounds enforce feasibility, while scene-aware spatial regularization and selective temporal memory preserve propagation boundaries and unchanged regions. Successive convex approximation (SCA), majorization--minimization alternating direction method of multipliers (MM-ADMM), and a low-complexity primal--dual hybrid gradient (LC-PDHG) mode realize the framework at different computational scales, and a local perturbation analysis gives an explicit multi-update tracking recursion. The updated state supports access-point association and codebook beam selection, while change-weighted A-optimal design closes the measurement--update--query loop. Over 500 realizations, the recurrent update remains stable through eight persistent scene events and raises best-beam accuracy from $76.64\%$ to $90.83\%$ as measured-location density grows from $2\%$ to $16\%$.

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic-Twin Channel Estimation: From Sparse Pilots to Persistent CSI

eess.SP ·2026-08-21 ·Tuo Wu, K. C. Ho
similarity 0.69
Abstract

Each repeated pilot block is typically treated as a separate channel-estimation problem, although much of the angle--delay state persists across updates. This paper defines an electromagnetic twin (ET) as a recursively synchronized signal-processing state containing channel state information (CSI), coefficientwise uncertainty, support confidence, and age. A channel knowledge map may initialize this state; subsequent pilots predict, correct, validate, and store the state. We formulate an anchored-window inverse problem that yields online uncertainty-weighted correction and fixed-lag smoothing as two convex operating modes of a persistent-state estimator. Uncertainty-aware ET FISTA (UET-FISTA) gives a zero-delay update, while an alternating direction method of multipliers (ET-ADMM) jointly refines a short window when delayed CSI is acceptable. Held-out pilots choose update, complete refresh, or hold under a prescribed family-wise false-acceptance probability, preventing an inaccurate stored state from being reused blindly. Conditional Bayesian Cramér--Rao bounds quantify the information supplied by the stored state and by future pilot blocks. With 20\% pilots, UET-FISTA reaches $-11.55$ dB normalized mean-square error, compared with $-3.42$ dB for static FISTA. Over 200 independent 50-epoch trajectories, three-epoch smoothing improves matched-state NMSE from $-10.28$ to $-13.41$ dB. On 40 off-grid QuaDRiGa trajectories, online UET-FISTA improves static recovery from $-1.37$ to $-1.88$ dB and effective rate from 1.688 to 1.919 bit/s/Hz. These results identify when persistent CSI reduces pilot demand and when the receiver should instead refresh or preserve its state.

0.54

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.65
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.45

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.64
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.61
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.61
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Turning Multipath into Positioning Information: Persistent Electromagnetic-Twin DoA Localization

eess.SP ·2026-10-29 ·Tuo Wu, Zhentian Zhang, Ye Tian, Hing Cheung So
similarity 0.61
Abstract · 13 pages, 11 figures

Reflected paths can support localization when line-of-sight (LoS) links are blocked, but their usefulness depends on how accurately the stored model predicts their directions. This paper develops electromagnetic-twin (ET) direction-of-arrival (DoA) localization with a persistent, physically calibrated path-angle field. A nominal floor plan supplies virtual-path geometry, and sparse reference probes at known positions learn a compact directional correction. Field order and regularization are selected from calibration data alone. For each user, unordered DoAs are processed by joint position estimation and one-to-one path association, using assignment-aware multistart search and robust Gauss--Newton refinement. New trusted probes update the stored correction through recursive least squares (RLS), without reprocessing all previous measurements. The analysis establishes calibration rank conditions, objective descent, and conditional information gains from reflected paths, while also distinguishing the decay of initialization bias from the convergence of localization error. Synthetic experiments use 500 queries per operating point. At 50% LoS blockage and $1.5^\circ$ DoA error, the calibrated ET achieves 0.39 m root-mean-square error, versus 0.55 m for nominal geometry. After a wall change, its final error is 0.43 m, versus 0.63 m for a frozen calibrated map. Equal-evidence comparisons show competitive calibrated alternatives and faster abrupt-change recovery with sliding-window updates than with the configured RLS. The results support reusable directional calibration, not a universally superior map or update rule, and validation is limited to synthetic first-order reflections with trusted calibration labels.

0.39

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.61
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

From Sparse Probes to Sum-Rate Maximization: Electromagnetic Twin Beamforming

eess.SP ·2026-08-21 ·Tuo Wu, Kangda Zhi, Jie Tang, Jianchao Zheng, Naofal Al-Dhahir +1 more
similarity 0.59
Abstract

Probing every candidate location at each wireless-map update is costly. This letter develops electromagnetic-twin (ET) beamforming that converts sparse spatial probes into a sum-rate decision. The ET stores a location-dependent angular power spectrum, updates its innovation through graph-regularized estimation, and queries user covariances for projected beam optimization. A rate-sensitivity bound selects subsequent probes by query-weighted posterior-variance reduction. With 1\% random probes, ET beamforming achieves $2.69$ bit/s/Hz versus $1.12$ for a static channel knowledge map; with 7\% query-aware probes, it reaches $3.03$ bit/s/Hz, within 3.4\% of perfect-covariance beamforming.

0.45