CS Paper Radar

Channel Knowledge Map Enabled Low-Complexity Dynamic Radio Environment Reconstruction

Yujun Lin, Zhiqiang Xiao, Hao Wu, Xiaoqiang Qiao, Fayu Wan, Tao Zhang

eess.SP ·submitted 2026-08-18 03:29 UTC · v1

Abstract

Accurate and timely radio environment reconstruction is important but challenging under particularly dynamic transmitter configurations. The conventional methods such as compressed sensing (CS), Kriging method or U-Net typically require environment measurements and reconstruction overhead for radio environment updating as the transmitter locations or radiation patterns change. In this paper, we propose a novel channel knowledge map (CKM)-enabled dynamic radio environment reconstruction method for efficient radio map updating. Specifically, the recently proposed CKM can store reusable path-level propagation knowledge that is decoupled from the transmitter-side radiation characteristics. We can leverage CKM for lightweight forward radio map generation as the transmitter locations and radiation patterns are known, without requiring new target-map measurements. Simulation results show that the proposed method outperforms CS, Kriging, and U-Net in reconstruction accuracy and exhibits strong robustness performance under dynamic transmitter configurations, which demonstrates the potential of the proposed method for flexible and efficient radio environment reconstruction in dynamic wireless networks.

Closest papers

Nearest neighbours by meaning across the whole index.

A Material-Aware Channel Model for Efficient CKM Generation via Environment Reconstruction

eess.SP ·2026-09-08 ·Xuancheng Zhu, Zhenjun Dong, Yong Zeng, Cheng-Xiang Wang
similarity 0.63
Abstract

Channel knowledge map (CKM) is a promising technology for environment-aware wireless communication, sensing, and localization in 6G networks. Accurate CKM generation requires precise reconstruction of the environment, including 3D geometries and scatterer materials, typically from multi-modal sensory observations such as LiDAR point clouds and sparse channel measurements. While the former is relatively easy to acquire, materials remain difficult to obtain directly from sparse channel measurements due to the lack of an explicit channel model linking them. To fill this gap, this paper proposes a material-aware channel model that explicitly characterizes the influence of scatterer materials on the wireless channel. Based on this model, an iterative gradient descent based material reconstruction algorithm is proposed. Full wave simulation results validate the developed model and the proposed algorithm, demonstrating their potentials for efficient CKM generation via environment reconstruction.

0.18

Synergizing CKM and ISAC for Environment-Aware Wireless Networks

eess.SP ·2026-11-08 ·Juncong Zhou, Yilong Chen, Yuan Guo, Zixiang Ren, Han Hu +2 more
survey similarity 0.58
Abstract

Channel knowledge map (CKM) and integrated sensing and communications (ISAC) have emerged as two key technologies for sixth-generation (6G) and beyond wireless networks, enabling a new paradigm toward environment-aware system design. CKMs provide static or stochastic wireless environment information a priori by learning location-dependent mappings from transceiver positions to channel knowledge of various types, whereas ISAC exploits wireless signals to sense environmental objects in real time. CKM and ISAC have primarily been studied separately in prior works, while their integration offers a promising approach for enhancing the environment awareness of 6G networks and further improving both sensing and communication capabilities. On the one hand, sensing can support CKM construction by providing location-tagged measurements and richer environmental observations, while also enabling real-time CKM refinement in dynamic environments. On the other hand, CKM can enhance sensing by offering prior environmental information for clutter mitigation, and CKM and sensing information can be jointly leveraged to improve communications. This article provides an overview of the complementary interactions between CKMs and ISAC, with particular emphasis on three design approaches: sensing-assisted CKM construction and refinement, CKM-assisted sensing, and joint CKM- and sensing-enhanced communications. We also discuss future research directions for achieving environment-aware wireless networks.

0.26

DyRadio: Spatiotemporal Diffusion for Dynamic Radio Map Reconstruction

cs.LG cs.AI ·2026-11-01 ·Zhijie Fan, Zhifeng Zhao, Rongpeng Li
similarity 0.57
Abstract · 13 pages, 7 figures, 8 tables

Accurate radio map (RM) reconstruction is essential for environment-aware wireless networks. Sampling-based methods, which infer radio conditions from sparse measurements, are widely adopted because they do not require explicit knowledge of transmitter configurations. However, in dynamic environments, time-varying propagation conditions cause RMs to evolve, complicating reconstruction from temporally distributed sparse observations. Although cross-frame observations provide complementary spatial information, their direct aggregation can introduce temporal state mismatch. Furthermore, unknown measurement noise adds to the reconstruction difficulties. To address these challenges, we propose DyRadio, a framework that integrates spatiotemporal RM reconstruction with unknown noise estimation. Specifically, a propagation-prior-guided, noise-conditioned spatiotemporal diffusion model (DM) jointly reconstructs consecutive RMs by capturing cross-frame dependencies, while adapting to measurement noise levels. To estimate the noise level, an iterative predictive likelihood method alternates between DM-based blind-area prediction and noise-level updates. The estimated noise level then conditions reconstruction of the complete RM sequence. Experimental results demonstrate superior reconstruction accuracy and robustness against measurement noise, with peak signal-to-noise ratio (PSNR) improvements of 1.18-5.75 dB over the best-performing baseline across all evaluated settings.

0.21

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.57
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.28

RMSampler: Sparse Radio Map Reconstruction with Active Sampling and Diffusion Posterior Correction

eess.SP ·2026-10-20 ·Nan Cheng, Xiucheng Wang
similarity 0.56
Abstract

Reconstructing a radio map (RM) from sparse received-power measurements supports non-cooperative interference monitoring and spectrum management. However,sparse measurements leave uncertainty about both the global RM and the interfering emitter location, making informative sampling and accurate reconstruction challenging. To address these challenges, a novel joint sampling and reconstruction method named RMSampler is proposed in this paper to improve measurement selection and RM reconstruction under limited measurement budgets. For measurement selection, RMSampler evaluates global RM error reduction using the covariance of diffusion-generated RMs and localization error reduction using candidate emitter locations. Because these errors have different units, their expected relative reductions are combined into a scale-invariant sampling criterion, with each acquired measurement updating both uncertainty estimates. After sampling, the updated emitter-location probabilities guide a separate conditional diffusion ensemble for final reconstruction. To improve measurement agreement, an effective sample size (ESS) target guides robust posterior correction, followed by a minimum-distortion projection enforcing measurement and building constraints. For the reconstruction ensemble, analysis establishes that increasing likelihood power reduces expected robust measurement loss, while pretrained neural parameters and architecture remain unchanged. Experiments using simulated and real-world measured data demonstrate improved reconstruction under matched measurement budgets. In the Chongqing real-world measured data experiment, root mean square error (RMSE) decreases from 3.54 to 2.73~dB relative to random sampling under a common reconstruction method.

0.39

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.56
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.56
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.55
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33