CS Paper Radar

A Material-Aware Channel Model for Efficient CKM Generation via Environment Reconstruction

Xuancheng Zhu, Zhenjun Dong, Yong Zeng, Cheng-Xiang Wang

eess.SP ·submitted 2026-09-08 15:07 UTC · v1

Abstract

Channel knowledge map (CKM) is a promising technology for environment-aware wireless communication, sensing, and localization in 6G networks. Accurate CKM generation requires precise reconstruction of the environment, including 3D geometries and scatterer materials, typically from multi-modal sensory observations such as LiDAR point clouds and sparse channel measurements. While the former is relatively easy to acquire, materials remain difficult to obtain directly from sparse channel measurements due to the lack of an explicit channel model linking them. To fill this gap, this paper proposes a material-aware channel model that explicitly characterizes the influence of scatterer materials on the wireless channel. Based on this model, an iterative gradient descent based material reconstruction algorithm is proposed. Full wave simulation results validate the developed model and the proposed algorithm, demonstrating their potentials for efficient CKM generation via environment reconstruction.

Closest papers

Nearest neighbours by meaning across the whole index.

Channel Knowledge Map Enabled Low-Complexity Dynamic Radio Environment Reconstruction

eess.SP ·2026-08-18 ·Yujun Lin, Zhiqiang Xiao, Hao Wu, Xiaoqiang Qiao, Fayu Wan +1 more
similarity 0.63
Abstract

Accurate and timely radio environment reconstruction is important but challenging under particularly dynamic transmitter configurations. The conventional methods such as compressed sensing (CS), Kriging method or U-Net typically require environment measurements and reconstruction overhead for radio environment updating as the transmitter locations or radiation patterns change. In this paper, we propose a novel channel knowledge map (CKM)-enabled dynamic radio environment reconstruction method for efficient radio map updating. Specifically, the recently proposed CKM can store reusable path-level propagation knowledge that is decoupled from the transmitter-side radiation characteristics. We can leverage CKM for lightweight forward radio map generation as the transmitter locations and radiation patterns are known, without requiring new target-map measurements. Simulation results show that the proposed method outperforms CS, Kriging, and U-Net in reconstruction accuracy and exhibits strong robustness performance under dynamic transmitter configurations, which demonstrates the potential of the proposed method for flexible and efficient radio environment reconstruction in dynamic wireless networks.

0.35

Synergizing CKM and ISAC for Environment-Aware Wireless Networks

eess.SP ·2026-11-08 ·Juncong Zhou, Yilong Chen, Yuan Guo, Zixiang Ren, Han Hu +2 more
survey similarity 0.63
Abstract

Channel knowledge map (CKM) and integrated sensing and communications (ISAC) have emerged as two key technologies for sixth-generation (6G) and beyond wireless networks, enabling a new paradigm toward environment-aware system design. CKMs provide static or stochastic wireless environment information a priori by learning location-dependent mappings from transceiver positions to channel knowledge of various types, whereas ISAC exploits wireless signals to sense environmental objects in real time. CKM and ISAC have primarily been studied separately in prior works, while their integration offers a promising approach for enhancing the environment awareness of 6G networks and further improving both sensing and communication capabilities. On the one hand, sensing can support CKM construction by providing location-tagged measurements and richer environmental observations, while also enabling real-time CKM refinement in dynamic environments. On the other hand, CKM can enhance sensing by offering prior environmental information for clutter mitigation, and CKM and sensing information can be jointly leveraged to improve communications. This article provides an overview of the complementary interactions between CKMs and ISAC, with particular emphasis on three design approaches: sensing-assisted CKM construction and refinement, CKM-assisted sensing, and joint CKM- and sensing-enhanced communications. We also discuss future research directions for achieving environment-aware wireless networks.

0.26

An Overview on Multimodal Wireless and Visual Sensing for Environment Reconstruction: Opportunities and Challenges

eess.SP ·2026-11-07 ·Guanlin Wu, Chao Hu, Yilong Chen, Yudong Guo, Rongfei Fan +3 more
survey similarity 0.59
Abstract

Physical-scene reconstruction through visual sensing and channel knowledge map (CKM) reconstruction through wireless sensing have attracted growing research interest but have largely evolved independently within the computer vision and wireless communications communities, respectively. When applied to the same physical environment, the two sensing modalities provide complementary observations. Visual sensing captures detailed scene geometry and appearance but is constrained by occlusion and poor lighting. Wireless sensing can provide information beyond visual line of sight regardless of lighting conditions, but its measurements are often sparse and difficult to associate with scene structures. These complementary strengths motivate a unified multimodal approach to physical-scene and CKM reconstruction. This paper provides an overview of such unified environment reconstruction through wireless and visual sensing. We first compare the capabilities and limitations of the two modalities and discuss potential applications that benefit from jointly reconstructing both targets. We then review two complementary research directions, namely wireless-assisted physical-scene reconstruction and vision-assisted CKM reconstruction, highlighting how each modality supports the reconstruction task associated with the other. Building on these perspectives, we discuss design principles for a joint representation that supports both targets and identify mutual refinement, in which each modality helps improve the reconstruction associated with the other. Finally, we discuss open challenges and future research directions, offering insights into developing site-specific environment models for sixth-generation (6G) and beyond networks.

0.30

Towards Environment-Aware 6G Network Planning: An Any-to-Any Channel Knowledge Map Approach

eess.SP ·2026-11-18 ·Yilong Chen, Jiaxuan Li, Yuan Guo, Wenhai Lai, Xinhao Li +5 more
similarity 0.59
Abstract

Planning sixth-generation (6G) networks for reliable coverage across diverse environments is challenging, as it requires channel knowledge between candidate network node locations and potential service regions. This article proposes an environment-aware network planning framework based on any-to-any (X2X) channel knowledge maps (CKMs), which characterize channels between arbitrary transmitter-receiver location pairs. Within this framework, we first construct X2X CKMs from environmental information, sparse channel measurements, or both, with map types and spatial resolutions selected according to the planning task. We then use these maps to predict coverage and optimize network deployment and configuration subject to service requirements and practical constraints, while accounting for subsequent network operation. Finally, field measurements assess channel prediction accuracy and deployment performance, providing feedback for CKM correction and deployment refinement. We discuss implementation methods and tradeoffs across these stages. Case studies illustrate the effectiveness of the framework for indoor intelligent reflecting surface (IRS) deployment and outdoor base station (BS) deployment. Live-network trials further demonstrate coverage gains from IRS deployment and BS reconfiguration, with measurement feedback supporting CKM calibration and configuration refinement.

0.16

MPSi: Neural Extraction of Site-Specific Multipath Propagation Properties for Massive MIMO

eess.SP ·2026-11-07 ·Maryam Rezvani, Raviraj Adve, Amr El-Keyi, Akram bin Sediq
similarity 0.57
Abstract · Submitted to IEEE for possible publication

Accurate extraction of site-specific multipath propagation properties enables a wide range of wireless applications, including initial access, wideband channel reconstruction, and the generation of channel datasets for learning-based and continual-learning systems. Classical parametric channel-sounding algorithms such as RIMAX provide physically interpretable estimates, but their data-dependent model-order selection and iterative nonlinear refinement introduce substantial delay and computational cost. This paper proposes MPSi, a physics-guided neural framework that replaces these costly stages with a compact path-count network and a fixed-depth, deep-unfolded Levenberg-Marquardt refinement. MPSi estimates the complex gain, angle of arrival, and propagation delay of each multipath component while preserving the underlying physical channel model. We evaluate MPSi in two site-specific ray-traced environments, a small cell and a dense urban area, and show that it achieves initial-access and full-channel-estimation performance comparable to an enhanced RIMAX baseline while requiring significantly fewer optimization iterations. The reconstructed channels also yield bit-error-rate performance close to the perfect-channel knowledge reference. These results position MPSi as a promising low-overhead framework for extracting multipath propagation properties in massive-MIMO systems and for generating cell-specific channel pseudo-labels for training when direct ground-truth measurements are unavailable.

0.31

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

eess.SP ·2026-08-30 ·Wenyan Ma, Zixiang Ren, Weitong Zhai, Ge Yan, Lipeng Zhu +2 more
survey similarity 0.57
Abstract

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

0.15

Electromagnetic World Model for 6G: A Unified Framework for Joint Environment Reconstruction and Channel Prediction

eess.SP ·2026-08-18 ·Yizhu Zhao, Li Yu, Jianhua Zhang, Yuxiang Zhang, Zhen Zhang +1 more
similarity 0.57
Abstract

The integration of sensing, communication, and intelligence is becoming a key enabler for sixth generation (6G) wireless systems, where intelligent terminals are expected to simultaneously support efficient link establishment and reliable environmental sensing. However, existing studies mainly exploit sensing information or communication information to address a single task, such as channel prediction or environment reconstruction. Motivated by the shared dependence of optical and radio-frequency signals on the surrounding environment, we propose the electromagnetic world model (EMWM), the first unified framework for joint environment reconstruction and channel prediction. EMWM learns a common electromagnetic representation with the potential to provide a modeling foundation for 6G tasks. Specifically, partial channel state information (CSI) and multi-view red-green-blue (RGB) images are encoded into CSI and visual tokens and jointly processed by a hierarchical world-model backbone with local and global aggregation. Based on the learned representation, a mixture-of-experts (MoE)-based CSI prediction head reconstructs the complete CSI, while a depth prediction head estimates multi-view depth maps that are further converted into three-dimensional (3D) point clouds. Moreover, a large-scale multi-modal dataset is constructed based on a campus digital twin. Experimental results show that EMWM outperforms conventional neural network and large language model (LLM) baselines in both CSI prediction and environment reconstruction, achieving a squared generalized cosine similarity (SGCS) of 0.9699 for CSI prediction while demonstrating robustness across different signal-to-noise ratio (SNR) conditions and zero-shot generalization at 28 GHz.

0.26

Universal CKM for Environment-Aware Wireless Networks: Enabling Cross-Device and Cross-Task Channel Knowledge Transfer

cs.IT ·2026-08-18 ·Haiquan Lu, Yong Zeng, Cheng-Xiang Wang, Xiqi Gao, Rui Zhang
published similarity 0.56
Abstract

Channel knowledge map (CKM) is a promising technology for environment-aware sixth-generation (6G) wireless networks. However, existing CKMs are tightly coupled with wireless devices and downstream tasks, which limit their scalability and reusability in wireless networks. To address these limitations, this article proposes the concept of universal CKM (uCKM) as a foundational wireless environment prior, which aims to enable cross-device and cross-task channel knowledge transfer for environment-aware wireless networks. We first revisit the representative CKMs and discuss their limitations. Then, the uCKM-enabled new paradigm for environment-aware wireless networks is introduced, and its benefits are highlighted from the perspectives of uCKM construction and utilization phases, for which we propose the visions of ``All for uCKM'' and ``uCKM for All'', i.e., the data acquired by all devices and tasks should contribute to the construction of uCKM, while the constructed uCKM, in turn, can be utilized to support all devices and tasks. Subsequently, we discuss the main challenges of uCKM and propose potential solutions. Last, we provide simulation results to demonstrate the feasibility and performance gains brought by uCKM and outline future research directions.

0.45