CS Paper Radar

Lunar Surface Receiver Clock Synchronization Using GNSS and Satellite Nadir Angle

Minju Han, Seunghyeon Park, Joon Hyo Rhee

eess.SP ·submitted 2026-10-01 04:01 UTC · v1

Abstract

The use of signals from Earth-orbiting Global Navigation Satellite System (GNSS) constellations for positioning, navigation, and timing on the lunar surface was recently demonstrated by the Lunar GNSS Receiver Experiment (LuGRE) aboard Blue Ghost Mission 1. For receiver clock synchronization using GNSS, Kalman filter performance depends on the satellite-specific measurement uncertainty used to construct the measurement noise covariance. Terrestrial measurement weighting commonly relies on receiver elevation angle, but the elevation angles in the analyzed LuGRE data are confined to 24.2-31.5 degrees, providing limited discrimination of measurement quality. In contrast, satellite nadir angles span 12.1-66.6 degrees, and the measurement variability increases substantially at small nadir angles. Based on this observation, we propose a measurement weighting model that combines satellite nadir angle with C/N0 for lunar surface receiver clock synchronization. The proposed model is evaluated against three weighting methods adopted from the literature using seven LuGRE operation periods (OPs). It achieves the lowest receiver clock bias root mean square error (RMSE) in six of the seven OPs and an overall RMSE of 5.78 m, which is 19.5% lower than that of the best comparison model. The proposed model also provides the lowest clock bias prediction RMSE under simulated measurement outages.

Comment
Submitted to ICCE-Asia 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Enhancing Lunar PNT Performance Through Surface Station Enabled Radiometric Observables

cs.RO ·2026-10-19 ·Toshiki Tanaka, Satoshi Ikari
similarity 0.68
Abstract

Future lunar surface missions require reliable positioning for autonomous rover operations. Lunar navigation satellite systems may provide limited vertical positioning accuracy due to satellite availability and observation geometry, particularly during early deployment. This study investigates a radiometric navigation architecture in which a lunar surface station (SS) improves rover positioning through double-differenced satellite observations and additional surface-to-surface ranging. Pseudorange and Doppler measurements from lunar navigation satellites are used for relative positioning between the SS and rover, while dual one-way ranging (DOWR) provides an additional range observable. The radiometric solution is integrated with rover dead-reckoning information. Monte Carlo simulations were conducted using five satellites representative of NASA's Lunar Communications Relay and Navigation Systems (LCRNS) constellation and a rover trajectory near Connecting Ridge at the lunar south pole. The results show that the SS improves horizontal and vertical relative positioning, with further gains from DOWR. In the simulated scenario, the mean 99.7% vertical positioning error decreased from 29.9 m without the SS to 5.5 m with double-differenced pseudorange and Doppler processing, and to 4.8 m with DOWR. An uncorrected DOWR hardware bias significantly degraded positioning, whereas the proposed bias-estimation method achieved a final estimation error of 0.058 +/- 0.057 m. The benefit of DOWR also depended on observation geometry. These results demonstrate the potential of a lunar surface station to improve vertical relative positioning through direct radiometric ranging, complementing its communication and navigation support roles.

0.16

LEO Doppler Matching from Power Spectrum Data with Continuity-Based Segmentation and Multi-Position Clock Offset Estimation

eess.SP ·2026-10-01 ·Gaeun Kim, Seunghyeon Park, Jongmin Park
similarity 0.64
Abstract · Submitted to ICCE-Asia 2026

Low Earth orbit (LEO) satellite Doppler measurements extracted from passive software-defined radio (SDR) spectrum data require temporal alignment with predicted satellite trajectories for reliable satellite association. In our previous framework, Doppler slope information was used during both segment generation and clock offset estimation, while the clock offset was estimated at a single coarse receiver position. This study proposes a satellite matching framework based on continuity-based Doppler segmentation and multi-position clock offset estimation to reduce these dependencies. Doppler segments are first generated using only temporal and frequency continuity, thereby separating segment generation from the slope criterion used for clock offset estimation. The clock offset is then estimated using five coarse receiver positions, consisting of one city-level nominal position and four surrounding positions, through a two-stage procedure based on slope compatibility and a combined Doppler cost. The aligned segments are subsequently associated with candidate satellites using a matching score based on the same Doppler slope and bias-removed RMSE metrics, and the resulting associations are evaluated through receiver localization. Experiments using six hours of passive Starlink/OneWeb monitoring data show that continuity-based segmentation alone did not improve receiver localization compared with slope-based segmentation under single-position clock offset estimation. However, applying the proposed multi-position clock offset estimation to the same continuity-based Doppler segments reduced the localization error from 32.99 km to 1.84 km, achieving the lowest error among the evaluated methods. The results for the evaluated dataset show improved spatial consistency of satellite associations when multi-position clock offset estimation is applied to continuity-based Doppler segments.

0.19

Observing Earth's ionospheric irregularities from the Moon

eess.SP astro-ph.EPphysics.geo-ph ·2026-11-16 ·Rong Yang, Zhihong Li, Andrea Nardin, Alex Minetto, Fabio Dovis +8 more
similarity 0.64
Abstract

Radio signals that propagate through the Earth's ionosphere carry information about possible irregular plasma structures. Such irregularities manifest themselves as amplitude signatures that depend on the propagation and observation geometry [1, 2]. Conventional ground and low-Earth-orbit (LEO) measurements sample these effects close to Earth. Here we present a systematic characterization of terrestrial ionospheric irregularities using Global Navigation Satellite System (GNSS) amplitude observations from the lunar surface, at distances of approximately 356,000-398,000 km from Earth's surface [3]. Using nearly 93 h of 1-Hz lunar-surface observations of GPS L1/L5 and Galileo E1/E5a collected by the Lunar GNSS Receiver Experiment (LuGRE), we reconstruct the propagation and scanning geometry to characterize the spatiotemporal signatures of amplitude and phase fluctuations. At lunar distance, the Fresnel scale approaches its finite-source limit, extending the observations to a propagation regime beyond conventional near-Earth configurations. Detrended receiver-reported carrier-to-noise density ratios ($δC/N_0$) reveal pronounced polar amplitude fluctuations at both frequency bands, also visible in the original measurements. Within the regions and local times sampled, large fluctuations occur in about 30% of valid one-minute polar windows, compared with less than 5% in either the equatorial or mid-latitude band. These findings support using the lunar surface as a vantage point for studying Earth's polar ionospheric irregularities and testing how propagation and scanning relative to the magnetic field shape their amplitude signatures. Future lunar observations could extend this approach to long-term monitoring of Earth's ionospheric irregularities

0.22

Geometric Analysis of Doppler-Based Navigation with Low Earth Orbit Satellites

cs.IT ·2026-09-10 ·Carlos Caravaca Gallego, Pini Gurfil, Hector Rotstein
similarity 0.62
Abstract

The increasing vulnerability of Global Navigation Satellite Systems has motivated renewed interest in Doppler-based navigation using low Earth orbit satellites, which can determine position, velocity, clock bias, and clock drift from carrier Doppler measurements. However, the geometric dilution of precision (GDOP) in this eight-state problem behaves fundamentally differently from the GDOP in pseudorange-based navigation. In particular, volume-based satellite selection, effective for pseudorange-based GDOP minimization, has been empirically found to perform poorly for Doppler GDOP. This paper establishes a geometric foundation for Doppler GDOP characterization. A closed-form geometric parameterization of the Doppler measurement Jacobian in terms of elevation, azimuth, inclination, and altitude ratio is derived. It is shown that the clock bias sensitivity depends on elevation, altitude, and the angle between the satellite velocity vector and the line of sight. This sensitivity produces a correlation with the clock drift that no geometric arrangement can remove. A Schur complement decomposition of the eight-state information matrix is performed, yielding an exact GDOP inflation formula, governed by a collinearity coefficient that measures the alignment between the clock bias column and a seven-state subspace. It is proven that the geometric coupling that renders clock bias observable is the same coupling that inflates estimation covariance, and that satellite altitude diversity reduces the collinearity by separating satellites at equal elevation onto distinct sensitivity bands. An example employing a two-shell satellite configuration illustrates the analysis.

0.27

Pulsar Constellation Evolution and PPP Convergence using LEO GNSS

eess.SP ·2026-10-05 ·Claire Mah, Thyagaraja Marathe, Ananya Vishwanath, Matteo Gala, Tyler G. R. Reid +1 more
published similarity 0.60
Abstract · 15 pages, 14 figures, ION GNSS+ 2026

The objective of this paper is to demonstrate the future impact of a dedicated low-earth-orbit (LEO) Global Navigation Satellite System (GNSS) on positioning, navigation, and timing (PNT), in addition to a reflective discussion on how common GNSS evaluation methods can best reflect LEO satellite dynamics. This paper will feature Xona's LEO constellation, Pulsar, at various stages of deployment in a case study comparing GPS, LEO-augmented GPS, and standalone LEO. Results include visibility and dilution of precision (DOP) analysis for Pulsar at four stages of constellation deployment, as well as two cases exploring how precise point positioning (PPP) convergence is affected by Pulsar's LEO satellite dynamics. Pulsar is highlighted in this paper for its purposeful design that allows for both GNSS augmentation through compatible signals and GNSS independence (Gala et al., 2026). As dedicated LEO satellite-based positioning becomes more prominent in the PNT industry, it is important to consider which methods are used to evaluate constellation geometry and positioning performance. By evaluating the constellation through a variety of different methods in this paper, a discussion on the future evolution of LEO navigation constellations is offered. Pulsar is compared to MEO GNSS, both as an augmentation and a standalone service, through availability, dilution of precision, and PPP convergence.

0.31

Toward Pseudorange-Based PNT with Starlink: A Mock Fused LEO GNSS Implementation

eess.SP astro-ph.IMeess.SY ·2026-11-10 ·Samuel C. Morgan, Zacharias M. Komodromos, Wenkai Qin, Andrew Graff, Zachary L. Clements +2 more
similarity 0.60
Abstract

We present experimental results from Starlink for pseudorange-based positioning, navigation, and timing (PNT), emulating a system that fuses a primary communications mission with a secondary low-Earth orbit (LEO) PNT mission. Legacy global navigation satellite system (GNSS) constellations faceinherent vulnerabilities and signal limitations, prompting growing interest in broadband LEO constellations---such as SpaceX's Starlink---for resilient PNT. However, opportunistic use of stand-alone Starlink signals fails to achieve GNSS-competitive accuracy due to frame timing irregularities and reliance on uncorrected poor-quality publicly available ephemeris data. To overcome these limitations, we present a mock implementation of a fused LEO GNSS architecture. Our method extracts time-of-arrival observables from live Starlink Ku-band downlinks and pairs them with high-fidelity, beam-specific orbit and clock models distributed as if provided natively by the constellation operator. In a field campaign, and despite constraints imposed by consumer-grade receiver hardware, the method yields 95% error bounds of 2.33 m horizontally (semi-major axis), 3.37 m vertically, and 11.19 ns in timing, with the actual solution errors falling well within these bounds.

0.14

Adaptive Orbit-Aided Vector Tracking for Orbit Determination of LEO Satellites

eess.SP eess.SY ·2026-10-28 ·Zihong Zhou, Bing Xu
similarity 0.59
Abstract

Reliable orbit determination for CubeSats is essential for emerging low-Earth-orbit positioning, navigation, and timing (LEO-PNT) applications. However, onboard orbit determination remains constrained by single-frequency GNSS code-based receivers, intermittent signal reception, and highly dynamic orbital conditions. This paper proposes an adaptive orbit-aided vector tracking (OAVT) algorithm for LEO-PNT CubeSat orbit determination under these conditions. The method employs a GNSS vector tracking loop (VTL) as the primary navigation estimator and loosely couples it with a low-fidelity orbital dynamics model (ODM), which provides auxiliary position and velocity pseudo-measurements. The contribution of the ODM is regulated through adaptive covariance assignment based on GNSS stress and the residual consistency between the ODM and GNSS solutions. Under nominal conditions, OAVT preserves the accuracy advantage of VTL over the conventional scalar tracking loop. The 3D position root-mean-square error (RMSE) is reduced from 2.631\,m for STL to 1.081\,m, while the 3D velocity RMSE decreases from 0.3985\,m/s to 0.1023\,m/s. Under degraded conditions, OAVT provides substantially greater robustness than both STL and standalone VTL. The 3D position RMSE remains bounded at 8.27\,m during a complete signal outage, 10.17\,m during gradual signal loss and reacquisition, and 26.65\,m under variable visibility, whereas STL fails to produce valid solutions and standalone VTL loses lock. These results demonstrate that OAVT substantially improves solution robustness and state continuity with only a moderate increase in computational burden, making it suitable for CubeSat orbit determination and future LEO-PNT missions.

0.28

An All-Digital Coherent AFSK Demodulator for CubeSat Applications

eess.SP ·2026-11-13 ·Rubem Vasconcelos Pacelli, Rodrigo de Lima Florindo, Felix Antreich, Antônio Macilio Pereira de Lucena
published similarity 0.58
Abstract · Preprint of an article published in Digital Signal Processing (Elsevier), 2025

Audio frequency-shift keying (AFSK) is a widely adopted modulation scheme for CubeSat systems due to its favorable bandwidth efficiency and implementation simplicity. However, coherent detection usually is avoided because synchronization impairments, caused by intense line-of-sight (LOS) dynamics inherent in low Earth orbit (LEO), may significantly degrade the bit error rate (BER). This paper presents a new all-digital coherent AFSK demodulator based on a Kalman filter (KF) for carrier phase and timing delay synchronization and the Viterbi algorithm for bit detection. The Viterbi algorithm is employed for maximum likelihood sequence detection, and the detected bit statistics are fed back to the KF to estimate phase shift, Doppler frequency shift, and Doppler drift induced by the LOS dynamics. Original mathematical analyses are derived to provide a theoretical foundation for the proposed demodulator's operation, specifically addressing its synchronization accuracy in dynamic LEO environments. The proposed demodulator is evaluated considering an additive white Gaussian noise channel with real CubeSat orbits. The performance results obtained through computer simulations demonstrate that the proposed model can withstand such scenarios with a gain of 5 dB in terms of BER compared to the conventional noncoherent AFSK demodulator. The KF performance is assessed using a moving root-mean-square error (MRMSE) statistic and the trace of its state error covariance matrix estimate.

0.44