CS Paper Radar

An All-Digital Coherent AFSK Demodulator for CubeSat Applications

Rubem Vasconcelos Pacelli, Rodrigo de Lima Florindo, Felix Antreich, Antônio Macilio Pereira de Lucena

eess.SP ·submitted 2026-11-13 18:24 UTC · v1
published

Abstract

Audio frequency-shift keying (AFSK) is a widely adopted modulation scheme for CubeSat systems due to its favorable bandwidth efficiency and implementation simplicity. However, coherent detection usually is avoided because synchronization impairments, caused by intense line-of-sight (LOS) dynamics inherent in low Earth orbit (LEO), may significantly degrade the bit error rate (BER). This paper presents a new all-digital coherent AFSK demodulator based on a Kalman filter (KF) for carrier phase and timing delay synchronization and the Viterbi algorithm for bit detection. The Viterbi algorithm is employed for maximum likelihood sequence detection, and the detected bit statistics are fed back to the KF to estimate phase shift, Doppler frequency shift, and Doppler drift induced by the LOS dynamics. Original mathematical analyses are derived to provide a theoretical foundation for the proposed demodulator's operation, specifically addressing its synchronization accuracy in dynamic LEO environments. The proposed demodulator is evaluated considering an additive white Gaussian noise channel with real CubeSat orbits. The performance results obtained through computer simulations demonstrate that the proposed model can withstand such scenarios with a gain of 5 dB in terms of BER compared to the conventional noncoherent AFSK demodulator. The KF performance is assessed using a moving root-mean-square error (MRMSE) statistic and the trace of its state error covariance matrix estimate.

Comment
Preprint of an article published in Digital Signal Processing (Elsevier), 2025
Journal ref
Digital Signal Processing, vol. 162, art. no. 105147, 2025
DOI
10.1016/j.dsp.2025.105147

Closest papers

Nearest neighbours by meaning across the whole index.

Frame-Induced Doppler Self-Ambiguity in SiriusXM Satellite Signals for Passive Radar

eess.SP ·2026-09-08 ·Khalid El-Darymli, Christoph H. Gierull, Ryan A. English, Tony Laneve
published similarity 0.62
Abstract

Satellite Digital Audio Radio Service (SDARS) signals are attractive illuminators of opportunity for passive radar due to their continuous geostationary coverage and relatively high effective radiated power. However, the deterministic time-division multiplexed (TDM) framing employed by these waveforms introduces inherent self-ambiguity that can constrain coherent integration and detection performance. This paper analyzes the self-ambiguity function (SAF) of the XM/SiriusXM (SXM) waveform and explicitly links the observed Doppler periodicity to the repetition of the fast synchronization preamble (FSP) embedded in the TDM master frame. A frame-accurate XM TDM signal simulation is used to establish the expected ambiguity behavior, which is then validated experimentally using real direct-path data collected from the SXM-8 satellite. Results demonstrate pronounced and persistent Doppler replicas at integer multiples of the XM FSP repetition frequency, forming a deterministic Doppler ``comb'' (grating-lobe structure) that spans Doppler extents relevant to GEO-based passive radar operation with multi-second coherent processing intervals.

0.52

LEO Doppler Matching from Power Spectrum Data with Continuity-Based Segmentation and Multi-Position Clock Offset Estimation

eess.SP ·2026-10-01 ·Gaeun Kim, Seunghyeon Park, Jongmin Park
similarity 0.62
Abstract · Submitted to ICCE-Asia 2026

Low Earth orbit (LEO) satellite Doppler measurements extracted from passive software-defined radio (SDR) spectrum data require temporal alignment with predicted satellite trajectories for reliable satellite association. In our previous framework, Doppler slope information was used during both segment generation and clock offset estimation, while the clock offset was estimated at a single coarse receiver position. This study proposes a satellite matching framework based on continuity-based Doppler segmentation and multi-position clock offset estimation to reduce these dependencies. Doppler segments are first generated using only temporal and frequency continuity, thereby separating segment generation from the slope criterion used for clock offset estimation. The clock offset is then estimated using five coarse receiver positions, consisting of one city-level nominal position and four surrounding positions, through a two-stage procedure based on slope compatibility and a combined Doppler cost. The aligned segments are subsequently associated with candidate satellites using a matching score based on the same Doppler slope and bias-removed RMSE metrics, and the resulting associations are evaluated through receiver localization. Experiments using six hours of passive Starlink/OneWeb monitoring data show that continuity-based segmentation alone did not improve receiver localization compared with slope-based segmentation under single-position clock offset estimation. However, applying the proposed multi-position clock offset estimation to the same continuity-based Doppler segments reduced the localization error from 32.99 km to 1.84 km, achieving the lowest error among the evaluated methods. The results for the evaluated dataset show improved spatial consistency of satellite associations when multi-position clock offset estimation is applied to continuity-based Doppler segments.

0.19

Sub Terahertz LEO Satellite Communication: Is Doppler Shift a Major Challenge?

cs.IT eess.SY ·2026-10-31 ·Seongjoon Kang, Parisa Ramezani, Ki Won Sung, Vitaly Petrov
similarity 0.61
Abstract

In this work, we investigate the impact of Doppler frequency shift on sub-terahertz low Earth orbit (LEO) satellite communications using OFDM transmission. To comprehensively evaluate the severity of the Doppler shift impact on sub-terahertz satellite-to-ground links, we first put together an evaluation framework that jointly accounts for major Doppler-induced and non-Doppler-induced signal impairments in such systems. We then compare and contrast three possible engineering approaches to deal with Doppler shift in such a communication system. Our study concludes that (i)~while just ignoring the Doppler effect in such high-frequency and high-mobility systems substantially compromises the performance and reliability, (ii)~most of the negative effects can be eliminated by implementing only a small set of low-complexity measures. We particularly show that even a single Doppler shift estimation over a 5-min-long satellite pass over the ground user location may be sufficient to ensure high performance throughout the entire connectivity period. Hence, while Doppler shift is an important effect to account for in sub-terahertz LEO satellite communications, it should not constitute a critical design challenge for these emerging systems.

0.15

Achievable Accuracy and Cramer Rao Bounds for SSB Based LEO Positioning in NR NTN

eess.SP ·2026-08-10 ·Rainer Bachl, Tingting Lei, Muhammad Nabeel
similarity 0.60
Abstract · Submitted to the 2026 IEEE Navigation Conference (NAVICON)

Advanced Low Earth Orbit (LEO) satellite networks, such as Starlinks Mobile Satellite Service (MSS), will adopt the 5G New Radio (NR) Non-Terrestrial Network (NTN) standard. This enables the use of ubiquitous Synchronization Signal Blocks (SSBs) for opportunistic receiver positioning based on pseudorange and Doppler measurements. In this work, we characterize the estimation theoretic limits of SSB-based positioning by deriving single SSB Cramer Rao lower bounds (CRLBs) for delay and carrier frequency observables associated with pseudorange and Doppler. These bounds are obtained using the full SSB time-frequency energy distribution and extended into a multi epoch, multi satellite Fisher information framework that jointly bounds stationary user position, clock bias, and clock drift. Each SSB contribution is weighted according to a range dependent CRLB determined by the received SNR, so the estimator and the bound share a common noise model. In simulation, the resulting bound closely matches achievable performance, and a physically weighted least squares estimator approaches the CRLB at realistic operating SNR. Using a Starlink based constellation, we analyze the operating SNR experienced by a ground user and demonstrate sub-meter positioning accuracy.

0.06

Clock-Shift-Aided Blind Doppler Matching in Passive SDR Monitoring Data for LEO Doppler Positioning

eess.SP ·2026-11-02 ·Seunghyeon Park, Gaeun Kim, Jiwon Seo
similarity 0.60
Abstract · Submitted to IEEE NAVICON 2026

Low Earth orbit (LEO) satellite signals have recently attracted increasing attention as opportunistic signals for positioning, navigation, and timing. Most Doppler-based LEO positioning studies rely on tracked satellite signals or raw in-phase/quadrature (IQ) samples that preserve signal-level structures for acquisition, Doppler tracking, or satellite association. In contrast, passive software-defined radio (SDR) monitoring systems often retain only time-frequency power scans, in which LEO Doppler traces appear as unlabeled ridges without raw IQ samples or identifiable signal structures. This paper proposes a clock-shift-aided segment-based blind Doppler matching method that associates unlabeled Doppler traces with candidate satellites predicted using two-line element (TLE) data. The proposed framework consists of slope-consistent Doppler segment generation, clock-shift-aided temporal alignment, and multi-metric satellite matching based on Doppler-rate and trajectory-shape consistency. The proposed method was evaluated using a three-hour subset of open Starlink/OneWeb monitoring data collected in the United Kingdom. The clock-offset search selected an effective offset of +19 s, for which 56 of 69 segments had at least one slope-compatible candidate, compared with 19 segments at zero shift. Using the resulting satellite associations, the batch positioning error over the full three-hour period was 104.2 m, whereas the RMSE-based and slope-based simple-segment baselines failed to converge near the reference receiver location.

0.45

Adaptive Orbit-Aided Vector Tracking for Orbit Determination of LEO Satellites

eess.SP eess.SY ·2026-10-28 ·Zihong Zhou, Bing Xu
similarity 0.58
Abstract

Reliable orbit determination for CubeSats is essential for emerging low-Earth-orbit positioning, navigation, and timing (LEO-PNT) applications. However, onboard orbit determination remains constrained by single-frequency GNSS code-based receivers, intermittent signal reception, and highly dynamic orbital conditions. This paper proposes an adaptive orbit-aided vector tracking (OAVT) algorithm for LEO-PNT CubeSat orbit determination under these conditions. The method employs a GNSS vector tracking loop (VTL) as the primary navigation estimator and loosely couples it with a low-fidelity orbital dynamics model (ODM), which provides auxiliary position and velocity pseudo-measurements. The contribution of the ODM is regulated through adaptive covariance assignment based on GNSS stress and the residual consistency between the ODM and GNSS solutions. Under nominal conditions, OAVT preserves the accuracy advantage of VTL over the conventional scalar tracking loop. The 3D position root-mean-square error (RMSE) is reduced from 2.631\,m for STL to 1.081\,m, while the 3D velocity RMSE decreases from 0.3985\,m/s to 0.1023\,m/s. Under degraded conditions, OAVT provides substantially greater robustness than both STL and standalone VTL. The 3D position RMSE remains bounded at 8.27\,m during a complete signal outage, 10.17\,m during gradual signal loss and reacquisition, and 26.65\,m under variable visibility, whereas STL fails to produce valid solutions and standalone VTL loses lock. These results demonstrate that OAVT substantially improves solution robustness and state continuity with only a moderate increase in computational burden, making it suitable for CubeSat orbit determination and future LEO-PNT missions.

0.28

Lunar Surface Receiver Clock Synchronization Using GNSS and Satellite Nadir Angle

eess.SP ·2026-10-01 ·Minju Han, Seunghyeon Park, Joon Hyo Rhee
similarity 0.58
Abstract · Submitted to ICCE-Asia 2026

The use of signals from Earth-orbiting Global Navigation Satellite System (GNSS) constellations for positioning, navigation, and timing on the lunar surface was recently demonstrated by the Lunar GNSS Receiver Experiment (LuGRE) aboard Blue Ghost Mission 1. For receiver clock synchronization using GNSS, Kalman filter performance depends on the satellite-specific measurement uncertainty used to construct the measurement noise covariance. Terrestrial measurement weighting commonly relies on receiver elevation angle, but the elevation angles in the analyzed LuGRE data are confined to 24.2-31.5 degrees, providing limited discrimination of measurement quality. In contrast, satellite nadir angles span 12.1-66.6 degrees, and the measurement variability increases substantially at small nadir angles. Based on this observation, we propose a measurement weighting model that combines satellite nadir angle with C/N0 for lunar surface receiver clock synchronization. The proposed model is evaluated against three weighting methods adopted from the literature using seven LuGRE operation periods (OPs). It achieves the lowest receiver clock bias root mean square error (RMSE) in six of the seven OPs and an overall RMSE of 5.78 m, which is 19.5% lower than that of the best comparison model. The proposed model also provides the lowest clock bias prediction RMSE under simulated measurement outages.

0.25

An HFM-Inspired Random Access Preamble Design for NTN under High Doppler

eess.SP ·2026-08-14 ·Mehwish Bibi, Saira Rafique, Ahmed Naeem, Huseyin Arslan
similarity 0.57
Abstract

Non-terrestrial networks (NTNs) are a key enabler of ubiquitous 6G connectivity, but the high orbital velocity and long propagation distances in low-Earth orbit (LEO) NTN operation introduce large Doppler shifts and substantial delay uncertainty that challenge New Radio (NR) physical random access channel (PRACH) design. Conventional Zadoff Chu (ZC) and linear frequency modulated (LFM) preambles are particularly vulnerable, as Doppler induced ambiguity and delay Doppler coupling degrade timing estimation and preamble identification. This paper proposes a hyperbolic frequency modulation (HFM) inspired PRACH preamble for robust synchronization and reliable identification under uncompensated or unknown Doppler, detected with a conventional matched filter receiver so that the gains reflect the preamble design. A unified delay Doppler ambiguity function framework characterizes the self and cross ambiguity behavior of ZC, LFM, and HFM inspired preambles, and a scaling-factor based codebook ensures multi-user separability. Simulation results under NTN channel conditions confirm higher detection probability, lower timing root mean square error (RMSE), and improved peak to sidelobe and integrated sidelobe levels compared with ZC and frequency-domain superposed LFM baselines.

0.04