CS Paper Radar

LunarRF: A Terrain-Aware Propagation Engine and Pole-Wide 3GPP Surface Coverage Atlas of the Lunar South Pole

Christopher J. Santorelli, Alexander M. Wyglinski

cs.NI astro-ph.EPastro-ph.IM ·submitted 2026-10-25 20:32 UTC · v2

Abstract

Artemis surface operations will depend on 3GPP cellular links, yet no public product shows where such links are physically possible across the lunar south pole. We present LunarRF, a GPU system for terrain-aware surface coverage, and the pole-wide atlas produced with it. A footprint engine casts 8192 radial profiles from one of 11,827 candidate masts enumerated by stated rules on the orbit-adjusted LOLA elevation model, takes the viewshed, and evaluates ITU-R P.1812 Delta-Bullington propagation on every profile, continuous through the radio horizon. An order-independent resolver merges the footprints per 20 m cell, making the run shardable and resumable. The atlas covers the disc south of 80°S at 20 m for four SFCG-recommended surface bands and the IM-2 demonstration band, 1.8 to 25.375 GHz, under a stated link budget, storing per cell the best-server power and identity, redundancy count, line of sight and coverability. The engine is validated against a parabolic-equation solver, ray tracing and analytic solutions. Swapping Deygout for Delta-Bullington, or adding terrain noise at the level of the published height-error map of the DEM, moves the coverable class on under 1% of a mast's disc in the mean. With every candidate active, 90.5% of the disc is coverable at 1.8 GHz, 59% at 5.855 GHz and 10% at 25.375 GHz, or 84, 43 and 5% after the measured 3-4 dB engine optimism. A mast covers about 90% of its visible area within its budget-set range, and no band is terrain-limited. The nine current Artemis regions are 85-99% coverable at 1.8 GHz and 22-85% at 5.855 GHz. The atlas and candidate table are released with a DOI.

Comment
27 pages, 16 figures, 13 tables. Data release: https://doi.org/10.5281/zenodo.23301640

Closest papers

Nearest neighbours by meaning across the whole index.

Enhancing Lunar PNT Performance Through Surface Station Enabled Radiometric Observables

cs.RO ·2026-10-19 ·Toshiki Tanaka, Satoshi Ikari
similarity 0.55
Abstract

Future lunar surface missions require reliable positioning for autonomous rover operations. Lunar navigation satellite systems may provide limited vertical positioning accuracy due to satellite availability and observation geometry, particularly during early deployment. This study investigates a radiometric navigation architecture in which a lunar surface station (SS) improves rover positioning through double-differenced satellite observations and additional surface-to-surface ranging. Pseudorange and Doppler measurements from lunar navigation satellites are used for relative positioning between the SS and rover, while dual one-way ranging (DOWR) provides an additional range observable. The radiometric solution is integrated with rover dead-reckoning information. Monte Carlo simulations were conducted using five satellites representative of NASA's Lunar Communications Relay and Navigation Systems (LCRNS) constellation and a rover trajectory near Connecting Ridge at the lunar south pole. The results show that the SS improves horizontal and vertical relative positioning, with further gains from DOWR. In the simulated scenario, the mean 99.7% vertical positioning error decreased from 29.9 m without the SS to 5.5 m with double-differenced pseudorange and Doppler processing, and to 4.8 m with DOWR. An uncorrected DOWR hardware bias significantly degraded positioning, whereas the proposed bias-estimation method achieved a final estimation error of 0.058 +/- 0.057 m. The benefit of DOWR also depended on observation geometry. These results demonstrate the potential of a lunar surface station to improve vertical relative positioning through direct radiometric ranging, complementing its communication and navigation support roles.

0.16

Six Ways to Draw Vangers with WebGPU: Real-Time Rendering of Editable Multi-Layer Height Fields

cs.GR ·2026-08-18 ·Dzmitry Malyshau
unusual similarity 0.53
Abstract · 29 pages. Submitted to the Journal of Computer Graphics Techniques. Supplemental video as ancillary

Terrain level-of-detail is measured almost exclusively on digital elevation models: single-valued, smooth at the sampling scale, sampled from real topography. Game terrain is often none of these. We compare six rendering methods - height-field ray marching, voxel-accelerated ray marching, sliced proxy geometry, per-sample bar rasterization, compute scattering, and a fitted triangle mesh - implemented in a single engine over a single data path, on the hand-authored multi-layer terrain of Vangers (1998), scored against a CPU ray cast of the same source data. Every method must preserve the two solid intervals available at a ground sample, render at interactive rates, and reflect local terrain destruction without reloading the level. These constraints rule out treating caves as decoration or amortizing a static preprocessing step over an immutable map. From the original game's top-down camera the six methods look interchangeable. At eye-level horizons they do not: point scattering loses coverage, slicing bands, and an over-simplified mesh can miss a wall. At the selected quality settings a greedy triangulated irregular network (TIN) has the lowest mean frame time on every device we measured, but the fit cost is set by the second layer rather than by floor relief, and making that mesh editable retains 319 MiB of GPU geometry and 535 MiB of CPU triangulation. All six implementations use the same native wgpu / WebGPU API and canonical WGSL. We release the engine, the harness, and a one-command measurement protocol.

0.39

Efficacy of Monocular Depth Estimation in Lunar Environments

cs.RO cs.CV ·2026-10-27 ·Michael W. Lanighan, Kenji Brameld, Seth Gee
published similarity 0.51
Abstract · Accepted at the International Conference on Space Robotics (iSpaRo) 2026

Recent advances in monocular depth estimation have demonstrated highly accurate 3D reconstructions within in-distribution terrestrial domains. This study investigates the efficacy of several state-of-the-art approaches to reconstruct out-of-distribution lunar environments using the NASA Ames Polar Optical Lunar Analog Reconstruction (POLAR) stereo dataset and Apollo 17 surface imagery. By leveraging these datasets, we establish a robust analog-to-field validation pipeline that evaluates quantitative performance against ground-truth physical analogs and qualitative performance against historical field data. Our results indicate that select state-of-the-art techniques can successfully generalize to produce high-fidelity relative 3D reconstructions of the unstructured lunar surface.

0.32

MARE: An Open-Source Lunar Rover Simulator with Shadow Ground Truth for Perception and Autonomy

cs.RO ·2026-10-20 ·Raúl Castilla-Arquillo, Miguel Olivares-Mendez
code/data similarity 0.50
Abstract · 10 pages, 16 figures, 3 tables. v2: adds a dataset with segmentation and depth baselines. Code: https://github.com/raulcastar/MARE-Lunar-Sim…

Lunar surface exploration increasingly relies on autonomous rovers that must perceive and traverse unstructured terrain under extreme illumination conditions. Near the lunar poles, low sun elevations produce long, high-contrast shadows that challenge stereo vision, terrain segmentation, and localization. Developing perception and navigation algorithms for these conditions requires large amounts of sensor data with accurate ground truth, which field campaigns and analog facilities can only provide at high cost and with limited variety. This paper presents MARE (Modular Autonomy and Rendering Environment), an open-source simulation suite for lunar rover perception and autonomy built on Unreal Engine 5 and ROS 2. MARE consists of three integrated components. Terrain Studio generates cratered and rocky lunar Digital Elevation Maps (DEMs) to build simulation scenes. A dedicated Unreal Engine project hosts two physics-based rovers with plugins for stereo, lidar, event, and Single-Photon Avalanche Diode (SPAD) cameras, streaming time-stamped sensor data and pixel-accurate ground truth. Lastly, a Guidance, Navigation, and Control (GNC) stack provides web-based mission control. Validation shows a mean Intersection over Union (IoU) of 0.79 between predicted and rendered shadows at low sun elevations, and stereo depth analysis verifies decreased pixel coverage in shadowed regions relative to sunlit terrain.

0.28

Lunar Surface Receiver Clock Synchronization Using GNSS and Satellite Nadir Angle

eess.SP ·2026-10-01 ·Minju Han, Seunghyeon Park, Joon Hyo Rhee
similarity 0.50
Abstract · Submitted to ICCE-Asia 2026

The use of signals from Earth-orbiting Global Navigation Satellite System (GNSS) constellations for positioning, navigation, and timing on the lunar surface was recently demonstrated by the Lunar GNSS Receiver Experiment (LuGRE) aboard Blue Ghost Mission 1. For receiver clock synchronization using GNSS, Kalman filter performance depends on the satellite-specific measurement uncertainty used to construct the measurement noise covariance. Terrestrial measurement weighting commonly relies on receiver elevation angle, but the elevation angles in the analyzed LuGRE data are confined to 24.2-31.5 degrees, providing limited discrimination of measurement quality. In contrast, satellite nadir angles span 12.1-66.6 degrees, and the measurement variability increases substantially at small nadir angles. Based on this observation, we propose a measurement weighting model that combines satellite nadir angle with C/N0 for lunar surface receiver clock synchronization. The proposed model is evaluated against three weighting methods adopted from the literature using seven LuGRE operation periods (OPs). It achieves the lowest receiver clock bias root mean square error (RMSE) in six of the seven OPs and an overall RMSE of 5.78 m, which is 19.5% lower than that of the best comparison model. The proposed model also provides the lowest clock bias prediction RMSE under simulated measurement outages.

0.25

Toward Lunar Legged Robots: Field Deployment Lessons at LUNA

cs.RO ·2026-10-08 ·Adrian Fuhrer, Joseph Church, Oliver Fischer, William Talbot, Nicolas Faesch +4 more
similarity 0.50
Abstract · Proceeding to the IEEE iSparo Conference 2026

Legged robots are promising candidates for future lunar surface missions because they can traverse steep, loose, and obstacle-rich terrain that challenges conventional wheeled rovers. However, readiness for lunar deployment is limited by uncertainties in foot-regolith interaction, dust generation, illumination-driven perception degradation, and operational constraints. This paper reports lessons from the 2025 LUNA analogue campaign, where ANYmal-D and Magnecko traversed loose regolith simulant and crater-like terrain and collected long-horizon navigation and visual-inertial data under challenging lighting. We show that quadrupedal robots can traverse regolith simulant, but performance is affected by sinkage and slip, dust-generating contacts, and perception failures caused by overexposure, shadows, and low-texture regions. These results motivate tighter integration of regolith-aware locomotion policies, illumination-robust perception, repeatable analogue testing, and mission-level operational validation for future lunar legged robots.

0.22

Observing Earth's ionospheric irregularities from the Moon

eess.SP astro-ph.EPphysics.geo-ph ·2026-11-16 ·Rong Yang, Zhihong Li, Andrea Nardin, Alex Minetto, Fabio Dovis +8 more
similarity 0.50
Abstract

Radio signals that propagate through the Earth's ionosphere carry information about possible irregular plasma structures. Such irregularities manifest themselves as amplitude signatures that depend on the propagation and observation geometry [1, 2]. Conventional ground and low-Earth-orbit (LEO) measurements sample these effects close to Earth. Here we present a systematic characterization of terrestrial ionospheric irregularities using Global Navigation Satellite System (GNSS) amplitude observations from the lunar surface, at distances of approximately 356,000-398,000 km from Earth's surface [3]. Using nearly 93 h of 1-Hz lunar-surface observations of GPS L1/L5 and Galileo E1/E5a collected by the Lunar GNSS Receiver Experiment (LuGRE), we reconstruct the propagation and scanning geometry to characterize the spatiotemporal signatures of amplitude and phase fluctuations. At lunar distance, the Fresnel scale approaches its finite-source limit, extending the observations to a propagation regime beyond conventional near-Earth configurations. Detrended receiver-reported carrier-to-noise density ratios ($δC/N_0$) reveal pronounced polar amplitude fluctuations at both frequency bands, also visible in the original measurements. Within the regions and local times sampled, large fluctuations occur in about 30% of valid one-minute polar windows, compared with less than 5% in either the equatorial or mid-latitude band. These findings support using the lunar surface as a vantage point for studying Earth's polar ionospheric irregularities and testing how propagation and scanning relative to the magnetic field shape their amplitude signatures. Future lunar observations could extend this approach to long-term monitoring of Earth's ionospheric irregularities

0.21

A Catalog of Dispersive Ionospheric and Plasmaspheric Arcs from Cislunar and Lunar-surface GNSS Radio Occultations

eess.SP physics.space-phastro-ph.SR ·2026-10-20 ·Francesco Fiorina, Alex Minetto, Rebecca Ghidoni, Marco Guerra, Claudio Cesaroni +3 more
published similarity 0.49
Abstract · 17 pages, 4 figures. Aggregated analyses from a subset of the dataset were presented at the Institute of Navigation International Technical …

This dataset is a catalog of 263 dispersive arcs induced by ionospheric and plasmaspheric occultation observed in GNSS signals recorded by the Lunar GNSS Receiver Experiment (LuGRE) payload during Blue Ghost Mission 1 (BGM1), in cislunar space and on the lunar surface. Occultation arcs are identified and classified as ingress, egress or tangent by combining independently GPS and Galileo dual-frequency observables and computing the rate of the total electron content (ROT) and ROT index (ROTI), and are validated through a geometric criterion based on the grazing altitude of the tangent point. No distinction is made between the ionospheric and plasmaspheric contributions to each arc, which is treated as a single dispersive signature. For each arc, the catalog provides timing, grazing altitude, summary ROT/ROTI/$Δ$STEC attributes, the geomagnetic activity level, and time series of leveled slant total electron content (STEC), not corrected for instrumental biases, ROT, ROTI, tangent-point position and local time. The HDF5 (Hierarchical Data Format version 5) file contains a header with dataset-wide metadata and per-class statistics, and one entry per arc. It enables rapid selection of occultation arcs for statistical studies and targeted analyses, and complements ground-based and low Earth orbit radio-occultation data during the declining phase of solar cycle 25.

0.35