CS Paper Radar

Attitude Estimation from Photometric Data using Gaussian Process Regression

Ryui Hara, Yasuhiro Yoshimura, Toshiya Hanada

eess.SY ·submitted 2026-08-17 06:32 UTC · v1
publishedhighly cited

Abstract

The rapid growth of resident space objects in Earth's orbit has intensified the need for advanced space situational awareness and space domain awareness to manage satellite traffic and prevent collisions. Attitude estimation is critical for accurate state propagation, as non-gravitational forces like solar radiation pressure and atmospheric drag depend on the object's attitude. This study explores using light curves, time variation of an object's brightness, to estimate a space object's attitude. Light curve inversion, traditionally used in astronomy, faces challenges when applied to resident space objects due to their non-convex shapes and specular reflections. Conventional methods for attitude estimation often assume known shape and surface parameters, which are usually unknown for space debris generated by a collision or breakup. To address this issue, this study proposes the estimation method combining Gaussian process regression with the unscented Kalman filter. This study uses Gaussian process regression for a non-parametric observation model, enhancing robustness against unknown surface parameters. Numerical examples consider a box-wing object in a geosynchronous orbit and demonstrate that the proposed method has better estimation accuracy than a conventional unscented Kalman filter. The numerical simulation results also represent the attitude estimation robust against uncertainties in surface properties, contributing to practical scenarios in space situational awareness and space domain awareness where the object parameters are unknown.

Comment
Accepted for publication in Journal of Space Safety Engineering

Closest papers

Nearest neighbours by meaning across the whole index.

Improving Observability of Relative Orbit Estimation Using Bearing Measurements and Light Curves

eess.SY ·2026-08-17 ·Yasuhiro Yoshimura, Toshiya Hanada
published similarity 0.62
Abstract · 33 pages. Accepted for publication in Journal of Space Safety Engineering

Relative orbit estimation using optical observations is a key technology for on-orbit servicing missions. In the far-range phase, the target appears as an unresolved point source, providing only bearing angles (azimuth and elevation) from the servicing satellite. Angles-only navigation is inherently challenging due to the weak observability of the relative range. To address this limitation, this study investigates the effectiveness of an estimation scheme that fuses photometric light curve data with bearing measurements. Since the light intensity depends on the relative distance, fusing light curves enhances the observability of the relative state. The Ashikhmin-Shirley model is used as the optical reflectance model, and observability analysis is conducted with the Fisher information matrix. Numerical simulations involving different target geometries, a flat plate and a box-wing satellite, demonstrate that integrating light curve measurements significantly enhances observability and enables faster convergence compared to conventional state estimation methods.

0.47

Adaptive Relative Orbit Control Considering Laser Ablation Uncertainty

eess.SY ·2026-08-17 ·Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima
published similarity 0.55
Abstract · Accepted for publication in Acta Astronautica

This study proposes a relative orbit control law for laser debris removal missions considering the uncertainties of laser ablation and atmospheric drag. A removal spacecraft irradiates laser pulses to a target debris to generate the ablation force for deorbiting. The deorbiting force lowers the target altitude, and the removal spacecraft must follow it to maintain its relative position for continuous laser irradiation. The difficulty stems from uncertainties of the magnitude of laser ablation and external disturbances such as atmospheric drag. To tackle this problem, this study derives an adaptive control method using the Gaussian process regression to cancel the uncertainties with a nonparametric regression model. Numerical simulations verify the proposed control law under the uncertainties of laser ablation and atmospheric drag. The proposed control law can contribute to the realization of a safer and more secure mission not only for laser debris removal missions, but also for other on-orbit services.

0.47

Monocular Navigation Relative to Unknown Spacecraft Using a Transformer-Aided Kalman Filter

cs.RO cs.CV ·2026-10-05 ·Pol Francesch Huc, Simone D'Amico
published similarity 0.54
Abstract

This work presents a novel learning-based pipeline for pose estimation of unknown spacecraft using only monocular images from a single servicer. The approach combines a transformer-based neural network with a Multi-State Constraint Kalman Filter (MSCKF) to estimate the pose (i.e., position and orientation of the target spacecraft relative to the camera) throughout rendezvous and proximity operations. Unlike existing vision-based methods that require prior knowledge of the target shape or inertia properties, rely on additional sensing modalities such as depth, lidar, or stereo, or only recover translation up to scale, the proposed pipeline generalizes to previously unseen spacecraft using a single monocular camera. The transformer network estimates the odometry, the change in pose between images up to scale, from SuperPoint features matched by LightGlue. The MSCKF uses these pseudo-measurements along with an orbit and attitude kinematics model to estimate the pose of the target. In particular, the relative orbit elements, the target's attitude with respect to the servicer's camera, and the associated angular velocity are estimated directly by the filter. Given the monocular approach and short distance to the target, the full observability of the range to the target is recovered via attitude maneuvers by the servicer. The method is trained and evaluated on a re-rendered high-resolution version of the SPE3R dataset, which includes synthetic images of 103 spacecraft. Eleven of these spacecraft are held out during training to evaluate the generalization to unseen targets. Monte Carlo simulations are then used to evaluate the navigation pipeline on rendered trajectories of the held out spacecraft. The results demonstrate that learned vision pipelines as a front-end for Kalman filters provide median errors of 3.7° in attitude and 2.2% of range in ROE when navigating about unknown targets.

0.52

Reference-Filter-Driven Transition Probabilities for IMM-Based Satellite Maneuver Detection

eess.SY astro-ph.IMeess.SP ·2026-10-08 ·Euiseok Han, Sangheon Choi, Seung-Hyun Kong
similarity 0.53
Abstract · 14 pages, 6 figures

Maneuver detection of non-cooperative satellites is an essential task of space situational awareness. The interacting multiple model (IMM) filter has been applied to detect unannounced maneuvers, but the standard IMM assumes a fixed Markov transition probability matrix (TPM) that must be tuned without knowledge of the maneuver rate of the target. To avoid this tuning, adaptive-TPM approaches update the TPM online from statistics computed inside the IMM. However, these statistics already depend on the TPM through the mixing step, and this dependence forms a feedback loop. Under the dynamics mismatch of orbit tracking, the loop can keep the maneuver probability high in the absence of a maneuver or suppress its rise when a maneuver occurs. In this paper, the TPM is driven by the normalized innovation squared (NIS) of a reference coast filter that is not mixed with the IMM, and the NIS is mapped continuously to the coast-to-maneuver transition probability. The reference-driven IMM (RD-IMM) is evaluated with four space-based optical sensors tracking a geosynchronous target. RD-IMM detects small burns that the fixed-TPM IMM fails to detect, with few false declarations in maneuver-free runs, and avoids both failures of the closed-loop adaptation. Moreover, RD-IMM reduces the position error after a small in-track burn by more than 50% compared with the single-filter approaches.

0.29

Sub-Pixel Affine Registration of Space Debris Images via the Radon Point Spread Function

cs.CV cs.GR ·2026-09-07 ·Shenshen Luan, Miaomiao Tian, Shuai Jiang, Yan Yang, Shuguo Xie +1 more
similarity 0.53
Abstract

Inter-frame affine misalignment caused by platform jitter and attitude adjustments poses a fundamental challenge for multi-frame analysis of point targets in optical surveillance. Conventional registration methods rely on spatial intensity correlations or distinctive image features, both of which are largely absent in low-signal-to-noise-ratio point target imagery. We introduce the Radon Point Spread Function (RPSF) to characterize point targets in the Radon-transformed domain, and derive a closed-form framework that jointly estimates inter-frame translation and rotation from as few as four scalar RPSF samples per frame pair. The method requires no iterative optimization, feature extraction or interpolation, which is suitable for resource-constrained onboard processing. Simulation results confirm sub-pixel translation accuracy and a mean rotation error of 0.2556° at 1° Radon angular resolution. Validation on five real space debris datasets including both ground-based and in-orbit observations yields a mean calibration error below 0.5 pixels, substantially exceeding the precision required for reliable multi-frame processing.

0.29

Input Bias Correction in Gaussian Process Regression

cs.RO cs.LG ·2026-10-22 ·Muzaffar Qureshi, Tochukwu E. Ogri, Trivikram Satharasi, Kyle Volle, Rushikesh Kamalapurkar
top venue similarity 0.53
Abstract · Accepted for publication in IEEE Robotics and Automation Letters (RA-L) (Oct, 2026)

In traditional Gaussian process (GP) regression, the inputs are typically assumed to be known, and uncertainty enters only through the measurements. When scalar fields are mapped using GP regression with measurements obtained from a mobile sensor, the inputs correspond to the estimated pose of the mobile sensor. The goal in this letter is to understand how a recorded GP, trained on erroneous inputs (e.g., pose estimates from dead-reckoning), can be corrected in a numerically efficient way when better estimates of the inputs become available. In the developed bias-aware GP (Ba-GP) framework, the recorded GP posterior-mean gradient is used to propagate estimated input bias and noise into mean and covariance corrections. The resulting additive covariance structure is then exploited to develop numerically efficient first-order correction algorithms. A simulation study and an indoor light-intensity mapping experiment show that Ba-GP improves predictive accuracy and uncertainty calibration relative to noisy-input GP baselines, with an order-of-magnitude reduction in computational cost relative to full GP retraining.

0.33

Selective Monocular Precession Estimation under Geometric and Evaluation Ambiguity: An Auditable Synthetic Study with ORBIT-SCOUT

cs.CV ·2026-10-26 ·Carlos Eduardo Sanoja
similarity 0.50
Abstract · 29 pages, 4 figures and 7 tables; extended narrative review and ancillary code/data for descriptive arithmetic and physical-metric reproduct…

Monocular observations of a tumbling object can support a precise fitted trajectory without establishing that the recovered physical axis is correct. We study this distinction for elongated, approximately cylindrical targets observed by a calibrated stationary camera. ORBIT-SCOUT couples image-derived line and rim geometry to constant-cone and torque-free triaxial trajectory families, then returns a linked momentum-axis and mean-precession-rate estimate only when numerical, geometric, temporal and competing-hypothesis checks pass. We describe the measurement objective, selection policy and limitations, and situate them within spacecraft pose estimation, unknown-target reconstruction, rigid-body identification and selective prediction. An internally preregistered population of 96 new synthetic scenes was processed in two cold passes, retaining all 192 attempts. In the primary pass, 38 scenes produced jointly correct estimates, none produced an incorrect estimate, 57 were withheld and one execution was incomplete. Correct coverage on the 64 supported scenes was 25/64. Ninety-five repeated pairs were scientifically equivalent under a frozen comparison policy; the remaining pair was incomplete. The registered coverage, failure-free execution and all-case repeatability targets were not met. Historical audits also exposed an overly permissive axis metric and motion-dependent acquisition cadence. The contribution is a documented measurement-to-decision implementation and a failure-preserving evaluation case study, not a new rigid-body theory or evidence of state-of-the-art accuracy. Zero observed errors does not establish calibrated risk, and conditional temporal checks do not remove shared image-feature bias. Real-image transfer and external reproduction remain open.

0.24

A Class of Bayesian Conjugate Distributions on $SE_n(3)$ for Motion Estimation

cs.RO stat.ME ·2026-11-12 ·Shijie Wang, Haichao Gui, Rui Zhong
similarity 0.50
Abstract · 17 pages, 4 figures

This paper proposes a novel class of Bayesian Conjugate Distributions (BCDs) on extended special Euclidean groups SE_n(3) for global motion uncertainty representation and estimation. BCDs are constructed by restricting matrix Gaussian distributions on ambient Euclidean space to SE_n(3), avoiding singularity of local coordinates. The unique feature of BCDs is their conjugacy to a broad class of sampling distributions arising in motion estimation, enabling exact closed-form Bayesian inference. Optimal estimation with respect to BCDs is further investigated for implementing motion estimation. Two means are extracted as random state estimates, which maximize probability and minimize mean squared error, respectively. Moreover, within the BCD class, moment matching is shown to minimize the Kullback-Leibler divergence, and maximum likelihood estimation is also derived, which provide analytical methods to approximate underlying distributions with the optimality guarantee. As an application, a Bayesian estimator for pose and velocity estimation of an Unmanned Aerial Vehicle (UAV) is developed within an assumed density filtering architecture. The propagation and estimate extraction leverage the optimal estimation related to BCDs, and the landmark measurements are exactly fused with the BCD prior in closed form due to the conjugacy. Numerical simulations of a UAV flight indicate the advantages of BCD-based estimators over two classic Kalman filters on Lie groups with various initial uncertainties and measurement noise.

0.27