CS Paper Radar

Enhanced Informed Dynamic BP Decoding Scheduling Strategies for 5G NR LDPC Codes

Tofar C. -Y. Chang, I-Hsiang Lee, Pin-Han Wang, Jian-Jia Weng, Yu T. Su

cs.IT ·submitted 2026-11-06 09:04 UTC · v1
published

Abstract

We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the Proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.

Comment
7 pages, 5 figures, 2022 IEEE 96th Vehicular Technology Conference
DOI
10.1109/VTC2022-Fall57202.2022.10013051

Closest papers

Nearest neighbours by meaning across the whole index.

Low-Latency LDPC Decoding Based on Consensus and Return Residual Belief Propagation

cs.IT ·2026-10-09 ·Allan E. Feitosa, Rodrigo C. de Lamare
similarity 0.75
Abstract · 16 figures, 21 pages

We propose two new decoding algorithms for low-density parity-check (LDPC) codes. The Consensus and Return residual belief propagation (C&R-RBP) algorithm reduces the number of iterations required to achieve a target decoding error rate over an AWGN channel by exploiting the availability of updated information, thereby mitigating the performance degradation caused by the greedy behavior of RBP-based algorithms and reducing error propagation. The Consensus and Delayed Return RBP algorithm (C&DR-RBP) achieves better performance in the early decoding iterations than C&R-RBP, making it particularly suitable for low-latency applications. Both proposed methods maintain the same computational complexity as the original RBP algorithm in terms of residual calculations. We also provide a formal analysis showing that the Consensus mechanism increases the probability of correct bit decisions under initial decoding conditions and in the presence of severe bit transmission errors, providing insight into the performance gains observed in the simulations. Numerical results based on the rapidly growing 5G New Radio (NR) standard, considering different code lengths, code rates, and channel models, demonstrate that both methods outperform competing RBP-based algorithms with similar overall computational complexity in terms of frame error rate (FER) and bit error rate (BER).

0.24

Core-Lock Scheduling for 5G NR LDPC Decoders

eess.SP ·2026-11-05 ·N. Papageorgiou, V. Paliouras
published similarity 0.68
Abstract · 4 pages, 4 figures, 1 table. Accepted for publication in the 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (I…

Accelerating iterative LDPC decoding while preserving error-correction reliability is a critical challenge in latency-constrained 5G New Radio (NR) and non-terrestrial networks. This paper proposes a hardware-efficient core-lock scheduling mechanism that evaluates the core syndrome weight after each layer update to selectively bypass extension layers. With the selected threshold $θ{=}0.20$, the mechanism reduces decoding latency by up to 31.3\% when integrated with static schedules, and by up to 45.5\% compared to alternative dynamic schemes utilizing the full parity-check matrix, without block error rate (BLER) degradation. Compared with an estimated fully parallel full-matrix checker, the core-only approach yields a 76\% reduction in shifter network area and a 73\% reduction in XOR gate count. For decoders with existing early termination, the proposed mechanism requires only a compact adder tree and a comparator.

0.41

Optimization of Finite Alphabet Message Passing Decoding on Fully Node-Parallel Architectures for 5G LDPC Codes

cs.IT eess.SP ·2026-11-11 ·Alexander von Bank, Oliver Griebel, Eike-Manuel Edelmann, Norbert Wehn, Laurent Schmalen
similarity 0.64
Abstract

In this paper, we propose a novel design method for the lookup tables (LUTs) of the minimum reconstruction, computation, and quantization (min-RCQ) LDPC code decoding algorithm. The proposed design method uses Bayesian optimization and samples from a subspace of the design space. The novel design method does not require knowledge about the channel or the modulation format and uses the frame error rate (FER) as loss function. The design method is applicable to irregular low-density parity-check (LDPC) codes with puncturing and shortening. Furthermore, the design method creates a set of iteration-agnostic LUTs that can be used over all iterations, which makes this approach suitable for fully node-parallel decoder architectures. We show that our proposed approach achieves a 38.6 % better energy efficiency than a state-of-the-art normalized min-sum (NMS) decoder without loss in error correction performance.

0.20

Entropy-Based and Quadratic Conditional Innovation Metrics for Informed Dynamic Scheduling of Belief-Propagation Decoding for LDPC Codes

cs.IT ·2026-11-14 ·Tofar Chih-Yuan Chang, Chia-En Liu, Ying-Ren Jian, Di-Chun Liang
published similarity 0.64
Abstract · 25 pages, 18 figures, 3 tables

We propose two enhanced conditional innovation (CI) metrics for informed dynamic scheduling (IDS) in belief-propagation (BP) decoding of LDPC codes. The CI-based residual BP (CIRBP) algorithm uses the CI metric to guide the selection of the variable node (VN) to be updated and has been shown to outperform several existing IDS-based BP decoders, especially at the early decoding stage. However, the original CI metric uses only the absolute difference between the current and precomputed posterior probabilities and does not separately account for the reliability associated with each probability. By reformulating the CI metric relative to the decision boundary, we separate each posterior probability into its decision side and a linear-distance term reflecting reliability. Replacing the latter with the binary entropy complement yields the proposed entropy-based CI (E-CI) metric. Moreover, the proposed quadratic CI (Q-CI) metric is derived from the leading quadratic term in the local expansion of the entropy complement, avoiding the logarithmic operations required for direct E-CI evaluation. We apply both proposed metrics to the CIRBP decoder and its node-wise variant. Numerical results show that the proposed metrics generally provide lower frame error rates than the original CI metric, with their relative advantages depending on the code and decoding procedure.

0.37

Row-Boosted Ensemble Belief Propagation for Short LDPC Codes

cs.IT eess.SP ·2026-08-10 ·Paul Bezner, Felix Krieg, Stephan ten Brink
similarity 0.61
Abstract · 6 pages, 9 figures, submitted to an IEEE conference for possible publication

Belief-propagation (BP) decoding of short and moderate-length low-density parity-check (LDPC) codes is limited by finite-length graph effects: a single decoder trajectory can become trapped or oscillatory even when an alternative trajectory would decode the received word. Existing ensemble-BP decoders create the required diversity through multiple parity-check matrices, automorphisms, modified schedules, subcodes, or altered update rules. We introduce row-boosted ensemble (RBE) decoding as a minimal decoder-side diversity mechanism: all ensemble members share the same parity-check matrix and the same BP kernel, and differ only in a small set of parity-check rows whose outgoing messages are boosted. On the 5G~NR BG1 \((144,96)\) code, RBE with \(32\) members lowers the frame-error rate of BP with \(20\) iterations (BP-20) from \(1.6\times10^{-2}\) to \(1.6\times10^{-3}\) at \(E_\mathrm{b}/N_0=4.0\,\mathrm{dB}\), outperforming saturated-min-sum and affine subcode ensembles of equal size. Increasing the ensemble size yields additional gains, indicating that RBE provides a scalable performance-complexity tradeoff. The gains transfer across 5G~NR block lengths and rates, to non-5G short LDPC codes, and across flooding and layered schedules.

0.43

Modulation Augmentation and Constellation Shaping for LDPC-Coded QPSK

cs.IT ·2026-09-30 ·Heping Wan, Joonyoung Cho, Sandesh Rao Mattu, Jamin Shah, Nishant Mehrotra +2 more
similarity 0.58
Abstract

While constellation shaping improves spectral efficiency, its application to quadrature phase-shift keying (QPSK) remains limited. We address this limitation by incorporating a short shaping code into low-density parity-check (LDPC)-coded QPSK systems. Specifically, a subset of LDPC codeword bits is used as shaping bits and mapped by the shaping code to a sparse codeword that enables probabilistic shaping by controlling non-equiprobable selection between lower- and higherenergy QPSK constellations. Because zeros dominate the sparse codeword, lower-energy constellation points are transmitted more frequently, yielding a Gaussian-like symbol distribution. By exploiting the channel-code protection of the shaping bits, we develop receiver algorithms that refine shaping-bit log-likelihood ratios (LLRs) using LDPC decoder feedback. Joint optimization of the shaping codebook, bit-to-symbol mapping and constellations enables the proposed shaping scheme to achieve gains of up to 0.6 and 0.53 dB over 5G New Radio (NR) LDPC-coded QPSK and QAM-16, respectively.

0.20

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.56
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

To Code or Not to Code: When and How to Use Network Coding in Energy Harvesting Wireless Multi-hop Networks

cs.NI ·2026-08-20 ·Nastooh Taheri Javan, Zahra Yaghoubi
publishedunusualhighly cited similarity 0.54
Abstract

The broadcast nature of communication in transmission media has driven the rise of network coding's popularity in wireless networks. Numerous benefits arise from employing network coding in multi-hop wireless networks, including enhanced throughput, reduced energy consumption, and decreased end-to-end delay. These advantages are a direct outcome of the minimized transmission count. This paper introduces a comprehensive framework to employ network coding in these networks. It refines decision-making at coding and decoding nodes simultaneously. The coding-nodes employ optimal stopping theory to find optimal moments for packet transmission. Meanwhile, the decoding-nodes dynamically decide, through SMDP (Semi Markov Decision Process) problem formulation, whether to conserve energy by deactivating radio units or to stay active for improved coding by overhearing packets. The proposed framework, named ENCODE, enables nodes to learn how and when to use network coding over time. Simulation results compare its performance with existing approaches. Our simulation results shed new light on when and how to use network coding in wireless multi-hop networks more effectively.

0.64