CS Paper Radar

5G-NetBotSim: A Synchronized Co-Simulation Framework for Connected Robots over ROS and srsRAN-based 5G Network

Narges Golmohammadi, Bhaskara Venkata Raju Garuda, Ayan Joshi, Sabur Baidya

cs.NI ·submitted 2026-11-06 17:10 UTC · v1

Abstract

Connected robotic applications increasingly rely on wireless communication for teleoperation, coordination, and distributed autonomy. However, robotic simulators often use ideal links or abstract delay models that do not capture cellular scheduling and protocol processing effects. We present 5G NetBotSim, a realtime co simulation framework integrating ROS/Gazebo workloads with an executable, full stack srsRAN 5G network emulator. The framework provides isolated User Equipment (UE) robot contexts and stage level timing across the host, gNB, UE, ROS, and robot execution stages. We evaluate human to robot teleoperation and robot to robot leader follower coordination under controlled channel quality conditions. Results show how CQI and MCS variations propagate to throughput, communication latency, and robot performance. In leader follower coordination, higher channel quality reduces mean tracking error from 0.558 m to 0.460 m, a 17.6% reduction. These results demonstrate protocol stack in the loop co simulation for joint network and robotic-application evaluation.

Closest papers

Nearest neighbours by meaning across the whole index.

TDMA Based Communications Control Co-Design for Cooperative Carrying: Delay Calibration and Sampling-Rate Optimization

cs.RO eess.SY ·2026-08-10 ·Zahra Seifaei, Maximilian Luebke, Torsten Reissland, Danial Dehghani, Norman Franchi
similarity 0.61
Abstract

Multi robot teams performing cooperative transportation face a fundamental challenge: maintaining stable control while keeping communications efficient. This paper investigates how adaptive sampling time adjustment informed by measured network delay and strategic leader rotation can distribute wireless load fairly across the team. We use physics based simulation in MuJoCo with realistic wireless modeling, including time division multiple access, medium access control, jitter, queueing, and packet loss, to evaluate three control approaches: fixed sampling with static leadership, dynamic sampling with static leadership, and dynamic sampling with rotating leadership. Our results reveal an important trade off: dynamic sampling effectively reduces communications overhead without compromising control performance, while rotating the leader role meaningfully improves how fairly airtime is distributed all with negligible impact on the team carrying ability. to the best of our knowledge, being among the first to jointly examine dynamic sampling, rotating leadership, and wireless protocol interactions in physicsrealistic multi robot cooperation, this work provides practical guidance for deploying coordinated robotic teams in real world settings where communications resources are limited.

0.04

Network-in-the-Loop at Scale: GPU-Batched 5G Simulation for Massively Parallel Robot Learning

cs.NI cs.AIcs.DCcs.RO ·2026-10-01 ·Zifan Zhang, Mingzhe Han, Kannan Athreya, Yuchen Liu
code/datahot direction similarity 0.60
Abstract · It is open source at https://github.com/ZzZTripleZzZ/isaac-net

Massively parallel GPU simulators train multi-robot policies in thousands of environments, and many fleets use private Fifth-Generation (5G) networks, where each robot's delay depends on its teammates' traffic. Network-in-the-loop training places a simulated 5G network inside this loop. However, GPU robot simulators reduce the network to an independent delay per message, while packet-level simulators run one scenario per CPU process and cannot keep pace with thousands of parallel environments. To bridge this gap, we present Isaac-Net, a GPU-batched 5G New Radio (NR) module that advances the uplink of thousands of environments in lockstep with Isaac Lab physics. Isaac-Net simulates every slot, the 0.5~ms interval in which the base station decides which robots transmit, for all environments at once. Extensive experiments confirm that its NR engine reproduces the median delay of ns-3 5G-LENA across loads, with a median delay 5--10\% low on an unseen carrier and 9\% high at 32 robots per environment in closed loop. The engine also reproduces the Age of Information (AoI), the age of each robot's newest delivered report, while an independent delay per message leaves the AoI tail about three times too light. In a configuration validated against 5G-LENA, Isaac-Net keeps the network in the loop for about one million robots on one GPU at 83\% of the Isaac Lab rate without the network, measured under a random policy. Isaac-Net is open source at https://github.com/ZzZTripleZzZ/isaac-net

0.49

Demo: Closed-Loop Sionna-Isaac Sim Co-Simulation Framework for Wireless-Aware Robot Navigation over ROS 2

cs.NI cs.RO ·2026-10-06 ·Yi Shen Lim, Seungeun Oh, Jihong Park
published similarity 0.59
Abstract · 2 pages, 2 figures. Accepted as a Demo paper at ACM MobiHoc 2026. Demo video: https://youtu.be/_TE7tGWxK6A

A robot that offloads its control loop to the network carries the receiver with it, so link quality is decided by where it goes. Simulating this requires both a physics engine and a site-specific propagation model at once; to our knowledge no simulator natively unifies both, with existing couplings of the two limited to offline analyses. We demonstrate a real-time co-simulation framework coupling NVIDIA Isaac Sim and NVIDIA Sionna over ROS 2 that closes the perception-action-communication (PAC) loop between them. Sionna ray-traces the base-station-to-robot channel over the exact geometry Isaac Sim simulates on, rather than modeling it stochastically, and feeds channel states back into the control loop in real time. Ray-traced on GPU, the coverage map is refreshed in ~16ms (~60 Hz), fast enough for real-time control. To showcase the framework's utility, we implement a wireless-aware navigation application in an OpenStreetMap(OSM)-derived SUTD campus twin with two Nova Carter robots: the closed-loop planner eliminates communication outage at only +7.4% traversal time over the shortest-path baseline (which spends 7.9 s of its 81.2 s run disconnected).

0.48

Deep Reinforcement Learning Assistance for Resilient Haptic Teleoperation over a 5G Network

eess.SP ·2026-10-21 ·Georgios Kokkinis, Aitor Hernandez Herranz, Qi Zhang
similarity 0.57
Abstract · 12 pages, 8 figures, 6 tables. Submitted to IEEE Transactions on Mobile Computing

Haptic teleoperation requires low-latency and reliable communication to preserve stable and responsive interaction between a human operator and a remote environment. However, network congestion can strongly degrade teleoperation performance, particularly when haptic traffic competes with other data flows for limited radio resources. This work investigates a deep reinforcement learning (DRL)-assisted teleoperation framework over an Ericsson 5G standalone (SA) testbed under different congestion and quality-of-service (QoS) configurations. In the evaluated task, a human operator uses a haptic device to steer a spaceship through a remote virtual game. The DRL agent runs inside the remote environment, hosted at the network edge, and assists the operator by blending its own actions with the operator's commands received over the 5G network. This placement gives the agent direct access to the current state of the environment, unaffected by network delay. Experimental results show that DRL assistance improves task performance under all network conditions, with the largest benefit under congestion, where it reduces mean task completion time by 20.6%. Under congestion, assisted operation even outperforms unassisted operation with QoS prioritisation, which restores latency close to the uncongested baseline.

0.24

Genie Sim Benchmark: Real-to-Sim Fidelity and Evaluation

cs.RO ·2026-11-11 ·Di Yang, Da Huang, Yang Lv, Fan Yang, Yi Lu +6 more
benchmark similarity 0.57
Abstract

We evaluate Genie Sim Benchmark through paired real-simulation tasks and complementary system-identification studies. Across 22 robot-task pairs spanning 16 task names, task-specific pi0.5 policies fine-tuned on real-robot data achieve a descriptive Score correlation of 0.9686, MAE 0.0405, RMSE 0.0520, with simulation-real differences from -0.110 to +0.080. G2 crsB experiments assess long-horizon closed-loop position and joint-side torque agreement, while five representative object cases examine identification and cross-engine contact transfer. A separate 32.6503 s teleoperation trajectory, excluded from mechanical identification and servo-gain search, evaluates external position targets through simulated motion-controller command shaping and a calibrated position servo. Across both arms, per-joint position RMSE spans 0.00614-0.03522 rad and current-derived torque RMSE spans 0.73545-4.00099 N m. Native PhysX adaptations recover three recorded interaction tasks, with case-dependent alignment gains. These results support task-specific simulation evaluation through joint assessment of task outcomes and physical-response consistency.

0.22

Remote Teleoperation of Endovascular Robots: A Network Emulation Framework for Systematic Performance Evaluation

cs.RO ·2026-11-18 ·Xingyu Chen, Nikola Fischer, Harry Robertshaw, Weiyuan Deng, Christos Bergeles +1 more
similarity 0.56
Abstract

Remote endovascular teleoperation requires network performance to be evaluated in relation to physical navigation and operator experience, while the effects of network degradation on the usability of remote endovascular systems remain insufficiently characterized from the perspective of clinical users. We developed a network emulation and benchmarking framework that combines an endovascular robot with data streaming. We conducted a user study involving eight clinicians from interventional neuroradiology and general interventional radiology and eight engineering students, who performed 480 navigation attempts across 15 network conditions. Communication performance and received video quality were assessed alongside navigation outcomes, confidence, workload and clinician rated acceptability. Under the most impaired combined condition, success was 78.1\%, compared with 93.8\% under the reference condition, and mean attempt time increased from 63.5 to 94.3\,s. At 5\% configured packet loss, 87.5\% of attempts succeeded, although all eight clinicians rated the condition unacceptable. Perceived video quality was associated with clinician confidence and acceptability, with mean within participant Spearman correlations of 0.72 and 0.78, respectively. Framework integration on a second robotic platform additionally supported successful remote navigation over a real network. Our framework provides a reusable basis that can help identify communication bottlenecks and assess their effects on navigation and clinician acceptance for endovascular intervention telesurgery tasks.

0.22

Teleoperated Haircutting with Delay Compensation and Passivity-Based Control for Unilateral Internet Teleoperation under Real Communication Uncertainties

cs.RO ·2026-11-18 ·Viridiana Luna-Zempoalteca, Zhendai Huang, Rosalba Galvan-Guerra, Antonio Rosales, Xiaoli Liu +1 more
similarity 0.55
Abstract · 11 pages and 15 figures

Robotic haircutting requires accurate motion execution and reliable communication to safely reproduce the operator's commands. Internet-based teleoperation is a key enabling technology to remotely perform precise manipulation tasks such as haircutting. However, communication uncertainties, including variable transmission delays and packet jitter, degrade synchronization between the master and slave systems and affect tracking performance. This paper presents a unilateral Internet teleoperation framework for robotic haircutting that takes into account experimentally measured communication uncertainties. Three delay-compensation techniques, namely Zero-Order Hold (ZOH), First-Order Hold (FOH), and Low-Pass Filtering (LPF), are evaluated together with a classical proportional-derivative (PD) controller and a passivity-based synchronization controller. Unlike conventional studies based on synthetic delay models, the proposed framework is validated using communication data acquired from a real cloud-based teleoperation platform, where both packet delay and effective delay are characterized. The results demonstrate that combining delay-compensation techniques with passivity-based synchronization improves the robustness of unilateral Internet teleoperation under realistic communication uncertainties, providing a reliable control framework for robotic haircutting applications.

0.21

Demonstration of Space Robot Teleoperation over a Lossy and Delayed Network using ATMOS

cs.RO eess.SYmath.OC ·2026-08-14 ·Inkyu Jang, Gregorio Marchesini, Nicola De Carli, Byeongjun Kim, Sunwoo Hwang +13 more
published similarity 0.55
Abstract · (c) 2026 the authors. This work has been accepted to IFAC for publication under a Creative Commons License CC-BY-NC-ND. 6 pages, 8 figures. …

We present a demonstration showcasing the Autonomy Testbed for Multi-purpose Orbiting Systems (ATMOS), a planar spacecraft-analog robot designed for hardware-in-the-loop evaluation of guidance and control strategies in microgravity-like conditions. Using ATMOS as the physical test platform, we investigate the design, analysis, and performance evaluation of control architectures for remotely operated spacecraft under round-trip communication delays. In this work, we develop and experimentally validate a control strategy that combines state prediction and trajectory tracking control to perform a docking maneuver, accounting for time-varying random communication latency between ground operators and the ATMOS system. The demonstration includes a long-distance remote control experiment between Seoul and Stockholm, introducing realistic intercontinental delays and variability. The results highlight the capability of ATMOS to support rapid, reliable, and cost-effective testing of spacecraft teleoperation concepts, establishing a first step toward robust validation of on-orbit operations in microgravity-like environments.

0.52