CS Paper Radar

Teleoperated Haircutting with Delay Compensation and Passivity-Based Control for Unilateral Internet Teleoperation under Real Communication Uncertainties

Viridiana Luna-Zempoalteca, Zhendai Huang, Rosalba Galvan-Guerra, Antonio Rosales, Xiaoli Liu, Shuai Li

cs.RO ·submitted 2026-11-18 18:28 UTC · v1

Abstract

Robotic haircutting requires accurate motion execution and reliable communication to safely reproduce the operator's commands. Internet-based teleoperation is a key enabling technology to remotely perform precise manipulation tasks such as haircutting. However, communication uncertainties, including variable transmission delays and packet jitter, degrade synchronization between the master and slave systems and affect tracking performance. This paper presents a unilateral Internet teleoperation framework for robotic haircutting that takes into account experimentally measured communication uncertainties. Three delay-compensation techniques, namely Zero-Order Hold (ZOH), First-Order Hold (FOH), and Low-Pass Filtering (LPF), are evaluated together with a classical proportional-derivative (PD) controller and a passivity-based synchronization controller. Unlike conventional studies based on synthetic delay models, the proposed framework is validated using communication data acquired from a real cloud-based teleoperation platform, where both packet delay and effective delay are characterized. The results demonstrate that combining delay-compensation techniques with passivity-based synchronization improves the robustness of unilateral Internet teleoperation under realistic communication uncertainties, providing a reliable control framework for robotic haircutting applications.

Comment
11 pages and 15 figures

Closest papers

Nearest neighbours by meaning across the whole index.

TeleHairing: A Teleoperation Baseline for Robotic Haircutting

cs.RO ·2026-10-05 ·Zhendai Huang, Aleksi Vilkki, Jianan Huang, Bolin Liao, Chunbo Luo +2 more
similarity 0.70
Abstract

Robotic haircutting requires controlled tool motion near the head while simultaneously accounting for communication, visual feedback, tool actuation, and interruption handling. Existing studies still lack an operator-in-the-loop reference for analyzing these coupled behaviors before human trials or stronger autonomy. This paper presents TeleHairing, a closed-loop teleoperation architecture for mannequin-based robotic haircutting evaluation under local, relay, and remote deployment conditions. Logged timing shows that the main remote latency increase occurs before the robot-side control endpoint: overall timing reached 190.5~ms in remote mode, while robot-side command queue, control processing, and control-to-robot timing remained similar across modes. Trajectory analysis shows that the larger remote command-following error was dominated by the terminal withdrawal segment rather than accumulated uniformly over the path; excluding this segment reduced remote root-mean-square error (RMSE) from 45.1 mm to 9.6 mm. Detection-loss trials further show that rebase events resumed motion without a large target jump under the tested condition. These results clarify how deployment, execution, and interruption affect the robotic haircutting teleoperation loop, providing a quantitative reference for future autonomy, safety, and user-facing studies.

0.34

Wave-Based Bilateral Teleoperation between Nonlinear Manipulators with Direct Contact Force Feedback

eess.SY cs.ROmath.DSmath.OC ·2026-08-20 ·G. Q. Bao Tran, Takanori Miyoshi, Ho Duc Tho
similarity 0.65
Abstract · 65th IEEE Conference on Decision and Control (CDC), Honolulu, HI, USA, Dec. 2026

We study bilateral teleoperation between nonlinear, multi-DOF robotic manipulators in the presence of constant communication delays. Unlike classical wave-transformation architectures that transmit a coordinating force, we consider the case where the environmental force is reflected to the master side to enhance teleoperation transparency. Since direct contact force feedback might destabilize the closed-loop system, we first develop a passivity-shortage characterization for the Euler--Lagrange remote system using a linear matrix inequality (LMI) approach. An upper strictly passive communication law is then employed to compensate for the computed passivity shortage so that the closed-loop stability under delays as well as position and force synchronization are preserved under appropriate conditions. Simulations with nonlinear 2-DOF robotic manipulators in different settings illustrate our approach.

0.36

Adaptive RBFNN Control of Uncertain Bilateral Teleoperation Systems with Delay-Dependent LMI Stability Conditions

eess.SY ·2026-08-20 ·Mohammadali Ghaemifar, Arshia Goshtasbi, Arian Hajizadeh, Armin Attarzadeh, Erfan Riazati
similarity 0.63
Abstract · 20 Pages, 7 Figures

Bilateral teleoperation requires stability despite uncertain master and slave dynamics and delayed communication channels. Existing radial basis function neural network (RBFNN) controllers mainly differ in uncertainty decomposition, while online adaptive parameters often increase with network size. This paper proposes a compact two-sided adaptive controller for a nonlinear bilateral teleoperator with constant forward and backward delays. Operator and environment impedances are incorporated into the manipulator dynamics, and each side uses only two scalar adaptive estimates: one for the ideal RBF weight norm and another for the combined effects of friction, approximation error, and disturbances. Both estimates are updated through sigma-modification, resulting in only two adaptive parameters regardless of the number of RBF nodes. A Lyapunov-Krasovskii functional integrating sliding-variable energy, estimation errors, and delay-dependent integral terms is developed. Free-weighting matrices based on sliding-surface identities provide delay-dependent matrix conditions that guarantee uniform ultimate boundedness of synchronization errors, sliding variables, and adaptive estimates. Simulations on two 2-degree-of-freedom (2-DOF) revolute manipulators with friction, external disturbance, and stepwise operator inputs demonstrate synchronization within approximately 2 s and reveal the trade-off between accuracy and control chattering.

0.38

Adaptive Finite-Time Position-Force Control of Teleoperation Systems With Time-Varying Delays Using a Liquid State Machine Uncertainty Estimator

eess.SY eess.SP ·2026-08-30 ·Shayan Akbari Haghighat, Mohammadali Ghaemifar, Armin Attarzadeh, Mohammadreza Piri Sangdeh
similarity 0.62
Abstract · 37 Pages, 24 Figures, 9 Tables

Teleoperation systems are increasingly used in medical, rehabilitation, and remote manipulation applications, where accurate position/force tracking and stable interaction are essential. In such applications, the remote environment may exhibit viscoelasticity, frictional memory, contact transitions, and other dynamic interaction effects, causing the system response to depend not only on the current state but also on its previous evolution. This history dependence, together with communication delays and uncertain nonlinear dynamics, makes accurate uncertainty compensation particularly challenging. Conventional feedforward neural approximators do not inherently retain temporal information, while fully recurrent architectures may introduce additional computational and online training complexity. To address this limitation, this article introduces the first application of a liquid state machine (LSM) to bilateral teleoperation control. A finite-time adaptive controller is developed using a hybrid position/force auxiliary error system with velocity and force filters, while the LSM is employed to estimate uncertain dynamics by exploiting its intrinsic temporal processing and fading-memory capabilities with a simple adaptation mechanism. Closed-loop stability and finite-time convergence are established through a Lyapunov--Krasovskii framework. Simulations in spring--damper and generalized Maxwell viscoelastic environments demonstrate improved position and force tracking and lower mean execution time compared with an RBFNN-based controller.

0.16

Remote Surfaces at Your Fingertips: Electrovibration-Based Tactile Feedback for Robot Teleoperation via Touchscreen Interfaces

cs.RO cs.HC ·2026-08-22 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.58
Abstract · 8 pages, 10 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Enabling operators to perceive and interact with remote environments naturally is a fundamental challenge in robotic teleoperation. This is especially critical in tasks involving physical interaction, where real-time haptic awareness improves operational safety and effectiveness. Existing kinesthetic haptic feedback methods suffer from instability during rigid surface contacts and remain sensitive to communication delays, while visual cue-based force feedback imposes additional cognitive load and limits sustained situational awareness. This work presents a teleoperation interface that conveys remote surface interactions to the operator through electrovibration-based tactile feedback, enabling naturally mapped force reflection while avoiding the stability issues associated with kinesthetic feedback and the latency limitations of mechanical actuators. A user study (N=21) evaluated interface usability, sense of presence, and operator workload under two force reflection conditions: visual feedback and electrovibration-based tactile feedback. Characterisation experiments further assessed path-following accuracy and response time across both conditions. Results show that tactile feedback significantly reduced response time by 15.35% (p=0.002, d=0.96) and increased the sense of presence by 31% (p<0.001, d=0.90) compared to visual feedback, while imposing comparable workload and usability across both conditions. These findings demonstrate that electrovibration-based tactile feedback is a viable and effective modality for robot teleoperation, improving operator responsiveness and sense of presence in contact-rich manipulation tasks, with direct applicability to safety-critical domains such as nuclear maintenance.

0.20

Location-Independent Robot-Assisted Finishing Using Digital Twins and Extended Reality

cs.HC ·2026-09-08 ·Jose Outeiro, Jia Holt, Tero Kaarlela, Khalil Chakal
similarity 0.57
Abstract · 6 pages, 5 figures, 2027 IEEE/SICE International Symposium on System Integration

This paper presents a cyber-physical system (CPS) for location-independent programming, supervision, training, and teleoperation of a Robot-Assisted Finishing (RAF) system used to post-process metal additive-manufactured (AM) components. A digital twin (DT) built in Unity is delivered to the operator as a WebGL application that supports both desktop and immersive modes through WebXR-compatible devices. Moreover, it exchanges robot state and pose commands with a collaborative robot through a Message Queuing Telemetry Transport (MQTT) broker. The DT enforces kinematic and collision constraints before a pose is released to the physical robot, and augments the virtual component with a color map of the surface topography that supports operator decisions on part repositioning or process termination. The architecture was validated on a specially designed physical RAF system. A steady-state joint synchronization error of 0.12 deg and a mean round-trip latency of 563 ms were measured, which is adequate for supervisory programming and intermittent teleoperation.

0.20

HuMiT: Low-Latency Whole-Body Humanoid Teleoperation via Compact Reference Tracking

cs.RO ·2026-10-21 ·Liu Cao, Botian Xu, Ruoqu Chen, Jiajun Liu, Mingzhi Pei +3 more
code/data similarity 0.56
Abstract · 7 pages, 3 figures, 4 tables. Project page: https://xiaohu-art.github.io/Track/

Real-time whole-body humanoid teleoperation remains challenging due to the computational latency introduced by optimization-based retargeting pipelines and future-frame conditioning. Existing motion tracking policies typically require dense reference targets including full joint positions, body-part transformations, and even future frames, which tightly couples the controller to expensive upstream modules. In this work, we present HuMiT, a whole-body teleoperation system built on a unified tracking policy that requires only a compact reference target, consisting of root height, root velocity, and the SE(3) poses of four sparse keypoints at the current frame, yet achieves competitive tracking fidelity compared to methods relying on more diverse reference states including complete joint positions, dense body-part transformations, and even future frames. Experiments show that our policy achieves a communication-to-inference latency of $\sim$20 ms measured between headset streaming and policy output and a video-based optical flow latency of 65 ms (median) across different motion types. We validate the system on a Unitree G1 humanoid, showcasing split-second reactive responses such as catching a tossed ball, as well as coordinated loco-manipulation capabilities. Project page: https://xiaohu-art.github.io/Track/.

0.26

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.56
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.30