CS Paper Radar

TeleHairing: A Teleoperation Baseline for Robotic Haircutting

Zhendai Huang, Aleksi Vilkki, Jianan Huang, Bolin Liao, Chunbo Luo, Leopoldo Angrisani, Shuai Li

cs.RO ·submitted 2026-10-05 13:38 UTC · v1

Abstract

Robotic haircutting requires controlled tool motion near the head while simultaneously accounting for communication, visual feedback, tool actuation, and interruption handling. Existing studies still lack an operator-in-the-loop reference for analyzing these coupled behaviors before human trials or stronger autonomy. This paper presents TeleHairing, a closed-loop teleoperation architecture for mannequin-based robotic haircutting evaluation under local, relay, and remote deployment conditions. Logged timing shows that the main remote latency increase occurs before the robot-side control endpoint: overall timing reached 190.5~ms in remote mode, while robot-side command queue, control processing, and control-to-robot timing remained similar across modes. Trajectory analysis shows that the larger remote command-following error was dominated by the terminal withdrawal segment rather than accumulated uniformly over the path; excluding this segment reduced remote root-mean-square error (RMSE) from 45.1 mm to 9.6 mm. Detection-loss trials further show that rebase events resumed motion without a large target jump under the tested condition. These results clarify how deployment, execution, and interruption affect the robotic haircutting teleoperation loop, providing a quantitative reference for future autonomy, safety, and user-facing studies.

Closest papers

Nearest neighbours by meaning across the whole index.

Teleoperated Haircutting with Delay Compensation and Passivity-Based Control for Unilateral Internet Teleoperation under Real Communication Uncertainties

cs.RO ·2026-11-18 ·Viridiana Luna-Zempoalteca, Zhendai Huang, Rosalba Galvan-Guerra, Antonio Rosales, Xiaoli Liu +1 more
similarity 0.70
Abstract · 11 pages and 15 figures

Robotic haircutting requires accurate motion execution and reliable communication to safely reproduce the operator's commands. Internet-based teleoperation is a key enabling technology to remotely perform precise manipulation tasks such as haircutting. However, communication uncertainties, including variable transmission delays and packet jitter, degrade synchronization between the master and slave systems and affect tracking performance. This paper presents a unilateral Internet teleoperation framework for robotic haircutting that takes into account experimentally measured communication uncertainties. Three delay-compensation techniques, namely Zero-Order Hold (ZOH), First-Order Hold (FOH), and Low-Pass Filtering (LPF), are evaluated together with a classical proportional-derivative (PD) controller and a passivity-based synchronization controller. Unlike conventional studies based on synthetic delay models, the proposed framework is validated using communication data acquired from a real cloud-based teleoperation platform, where both packet delay and effective delay are characterized. The results demonstrate that combining delay-compensation techniques with passivity-based synchronization improves the robustness of unilateral Internet teleoperation under realistic communication uncertainties, providing a reliable control framework for robotic haircutting applications.

0.21

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.63
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.30

Remote Surfaces at Your Fingertips: Electrovibration-Based Tactile Feedback for Robot Teleoperation via Touchscreen Interfaces

cs.RO cs.HC ·2026-08-22 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.62
Abstract · 8 pages, 10 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Enabling operators to perceive and interact with remote environments naturally is a fundamental challenge in robotic teleoperation. This is especially critical in tasks involving physical interaction, where real-time haptic awareness improves operational safety and effectiveness. Existing kinesthetic haptic feedback methods suffer from instability during rigid surface contacts and remain sensitive to communication delays, while visual cue-based force feedback imposes additional cognitive load and limits sustained situational awareness. This work presents a teleoperation interface that conveys remote surface interactions to the operator through electrovibration-based tactile feedback, enabling naturally mapped force reflection while avoiding the stability issues associated with kinesthetic feedback and the latency limitations of mechanical actuators. A user study (N=21) evaluated interface usability, sense of presence, and operator workload under two force reflection conditions: visual feedback and electrovibration-based tactile feedback. Characterisation experiments further assessed path-following accuracy and response time across both conditions. Results show that tactile feedback significantly reduced response time by 15.35% (p=0.002, d=0.96) and increased the sense of presence by 31% (p<0.001, d=0.90) compared to visual feedback, while imposing comparable workload and usability across both conditions. These findings demonstrate that electrovibration-based tactile feedback is a viable and effective modality for robot teleoperation, improving operator responsiveness and sense of presence in contact-rich manipulation tasks, with direct applicability to safety-critical domains such as nuclear maintenance.

0.20

TacHair: Tactile Contact-Distribution Guided Online Correction for Robotic Hair Stroking and Perception

cs.RO ·2026-10-07 ·Ruiyi Hu, Yongqiang Zhao, Daniel Bak, Yupeng Wang, Xuyang Zhang +1 more
code/data similarity 0.62
Abstract

Hair stroking is common in daily grooming and personal care, and is also widely used in hair-product evaluation, motivating robots with similar physical interaction capabilities. Existing robotic hair-care and surface-following methods mainly rely on trajectory planning, compliance, force regulation, or tactile-conditioned policies, but deformable hair can remain in contact while gradually drifting across the end-effector, making local interaction difficult to regulate. We propose TacHair, a tactile contact-distribution guided online correction framework that represents high-resolution tactile observations as a spatial hair-contact distribution. A visuotactile imitation policy generates the nominal stroking motion, while a separately trained residual module corrects local contact deviations, separating task progression from contact recovery. We evaluate TacHair in 525 real-robot trials across five head geometries and three hair conditions. A successful stroke requires both sufficient task progression and contact maintenance; our method improves success from 42.9% to 62.3% and contact maintenance from 59.4% to 88.0% over the same visuotactile policy without correction. These results demonstrate spatial tactile contact distributions as an effective feedback representation for contact-preserving interaction with deformable and visually occluded surfaces. Demos, code, and datasets are available at https://tachair.github.io.

0.27

Design and Evaluation of a Collaborative Teleoperation Interface for Multi-Operator Multi-Robot Systems in Challenging Environments

cs.RO cs.HC ·2026-10-10 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.61
Abstract · 9 pages, 8 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Multi-robot systems that combine the complementary capabilities of specialised platforms are critical for complex missions in challenging, inaccessible environments. Current deployments assign an operator or operator team to each robot, with collaboration relying on operator-to-operator communication to manually coordinate heterogeneous platforms with incompatible interfaces. This operator-dependent approach increases cognitive load and limits scalability across robots from different manufacturers. This study designs and evaluates a shared-visualisation collaborative teleoperation interface to improve operator coordination, situational awareness, and the task performance in multi-operator, multi-robot systems. A comparative user study with 16 participants compared three teleoperation conditions: co-located operators with a shared interface, remote operators with a shared interface, and co-located operators with individual interfaces. Participants controlled two simulated robots in a nuclear power plant digital twin to complete disaster response tasks. Performance metrics, physiological data, and behavioural measures were recorded to assess task performance, cognitive load, and operator awareness across conditions. The co-located shared-interface condition achieved the fastest mission completion (292.8 s), outperforming remote operation (351.6 s) and individual interfaces (385.1 s), with the fewest collisions (0.9 per trial) and highest situational awareness accuracy (91.1 %). Physical co-presence was associated with reduced cognitive load, with NASA-TLX scores increasing from 38.2 in co-located to 57.7 in remote operation, supported by consistent physiological indicators. These results demonstrate that co-presence and shared interfaces provide complementary benefits, supporting workload regulation and mutual awareness respectively in multi-operator, multi-robot teleoperation.

0.36

TEAR: Task-Evidence Authority Routing for Robotic Manipulation

cs.RO ·2026-10-22 ·Shicheng Zhang, Hui Liu, Haoliang Li
similarity 0.60
Abstract · 9 pages

Reliable robotic manipulation in field-deployed settings requires more than executing a capable controller. As the execution conditions change, the system must decide, online and on the robot side, which control source should hold authority. Human teleoperation adapts readily to contact-rich and semantically ambiguous situations but depends on a stable communication link. Local autonomy is executed without continuous human intervention, but may fail under semantic ambiguity, long-horizon drift, and unforeseen contingencies. These two control sources exhibit complementary reliability profiles. We formulate this complementarity as a control authority routing problem and present Task-Evidence Authority Routing for Robotic Manipulation (TEAR), an edge-deployable framework that allocates authority between human teleoperation and local autonomy. TEAR arbitrates on the robot side using network-state evidence, which governs the usability of teleoperation, and task-semantic evidence, which reflects whether autonomous execution remains consistent with the current task. A lightweight temporal arbitrator observes both forms of evidence together with robot state and current authority to time authority transfers. Across simulated and real-world trials under dynamic network conditions, TEAR achieves task success rates close to pure teleoperation while limiting teleoperation to 19.8-27.4% of control steps and improves success by 30-40% over autonomy-only execution in our settings. These results demonstrate the potential of complementary authority routing to sustain successful manipulation with substantially reduced dependence on continuous human control.

0.29

Genie Sim Benchmark: Real-to-Sim Fidelity and Evaluation

cs.RO ·2026-11-11 ·Di Yang, Da Huang, Yang Lv, Fan Yang, Yi Lu +6 more
benchmark similarity 0.60
Abstract

We evaluate Genie Sim Benchmark through paired real-simulation tasks and complementary system-identification studies. Across 22 robot-task pairs spanning 16 task names, task-specific pi0.5 policies fine-tuned on real-robot data achieve a descriptive Score correlation of 0.9686, MAE 0.0405, RMSE 0.0520, with simulation-real differences from -0.110 to +0.080. G2 crsB experiments assess long-horizon closed-loop position and joint-side torque agreement, while five representative object cases examine identification and cross-engine contact transfer. A separate 32.6503 s teleoperation trajectory, excluded from mechanical identification and servo-gain search, evaluates external position targets through simulated motion-controller command shaping and a calibrated position servo. Across both arms, per-joint position RMSE spans 0.00614-0.03522 rad and current-derived torque RMSE spans 0.73545-4.00099 N m. Native PhysX adaptations recover three recorded interaction tasks, with case-dependent alignment gains. These results support task-specific simulation evaluation through joint assessment of task outcomes and physical-response consistency.

0.22

GHOST in the Robots: Real-Time Exocentric Dual-Robot VR Teleoperation from Onboard Cameras

cs.RO ·2026-08-29 ·Yichen Wei, Faisal Zaghloul, Soujanya C Aryal, Aanya K. Agrawal, Chengfan Li +3 more
top venuecode/data similarity 0.60
Abstract

Teleoperating multiple robots simultaneously enables additional views and coordinated control. Yet, it poses fundamental challenges: the system must present sensor data cohesively and allow operators to manage multiple robot bases, arms, and cameras while maintaining low latency. Current multi-robot teleoperation systems require multiple operators, rely on autonomy, or restrict operators to high-level commands. We present GHOST: an open-source VR teleoperation system that enables single operator control of two mobile manipulators via direct lowlevel commands using only onboard sensing. GHOST creates an exocentric 3D workspace by aligning real-time point clouds from the robots' RGB-D cameras, where scene coverage is improved through learning-based completion to aid operator spatial awareness. For control, the operator uses a mode-switching architecture to command either robot individually or both robots simultaneously. Experiments with 15 novice participants demonstrate 1.6-4x the success rate of an off-the-shelf tablet interface. For experts across nine challenging dual-robot tasks, our system enabled completion of two tasks that were infeasible with the tablet, and was 1.47x faster on average than the tablet. Website and code: https://h2r.github.io/GHOST/.

0.38