CS Paper Radar

Adaptive RBFNN Control of Uncertain Bilateral Teleoperation Systems with Delay-Dependent LMI Stability Conditions

Mohammadali Ghaemifar, Arshia Goshtasbi, Arian Hajizadeh, Armin Attarzadeh, Erfan Riazati

eess.SY ·submitted 2026-08-20 15:37 UTC · v1

Abstract

Bilateral teleoperation requires stability despite uncertain master and slave dynamics and delayed communication channels. Existing radial basis function neural network (RBFNN) controllers mainly differ in uncertainty decomposition, while online adaptive parameters often increase with network size. This paper proposes a compact two-sided adaptive controller for a nonlinear bilateral teleoperator with constant forward and backward delays. Operator and environment impedances are incorporated into the manipulator dynamics, and each side uses only two scalar adaptive estimates: one for the ideal RBF weight norm and another for the combined effects of friction, approximation error, and disturbances. Both estimates are updated through sigma-modification, resulting in only two adaptive parameters regardless of the number of RBF nodes. A Lyapunov-Krasovskii functional integrating sliding-variable energy, estimation errors, and delay-dependent integral terms is developed. Free-weighting matrices based on sliding-surface identities provide delay-dependent matrix conditions that guarantee uniform ultimate boundedness of synchronization errors, sliding variables, and adaptive estimates. Simulations on two 2-degree-of-freedom (2-DOF) revolute manipulators with friction, external disturbance, and stepwise operator inputs demonstrate synchronization within approximately 2 s and reveal the trade-off between accuracy and control chattering.

Comment
20 Pages, 7 Figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Neural Network Based Teleoperation for Remote Controlled Vehicles

cs.RO cs.HC ·2026-08-11 ·Ning Ding, Azim Eskandarian
top venue similarity 0.70
Abstract

Direct teleoperation of vehicles faces critical technical bottlenecks: communication latency and the operator's inability to physically perceive unmodeled environmental disturbances (e.g., aerodynamic drag, bank angles) coupled with highly nonlinear tire-road dynamics. To address these challenges, we propose a tailored unilateral teleoperation framework. The system integrates the Wave Variable (WV) approach to passively guarantee stability under stochastic delays, and an adaptive Radial Basis Function Network (RBFN) to actively compensate for vehicle-specific uncertainties. Unlike existing WV-neural network architectures designed for bilateral robotic arms, our framework features decoupled adaptive laws specifically designed for vehicle longitudinal and lateral dynamics. Furthermore, compared to model-heavy predictive controllers, the model-free RBFN offers rapid online adaptation without heavy computational overhead. Building upon our preliminary theoretical formulation, this brief paper presents comprehensive comparative analyses and real-world hardware validations. Simulation benchmarks against PID, LQR, MPC, and NMPC demonstrate that the RBFN achieves superior robustness against unmodeled disturbances while requiring orders of magnitude less execution time than MPC and NMPC, making it ideal for resource-constrained vehicle edge computing. Finally, hardware-in-the-loop experiments using a 1/10th scale vehicle over a 4G network validate the system's practical feasibility, safety, and robust trajectory tracking under physical road uncertainties.

0.29

Adaptive Finite-Time Position-Force Control of Teleoperation Systems With Time-Varying Delays Using a Liquid State Machine Uncertainty Estimator

eess.SY eess.SP ·2026-08-30 ·Shayan Akbari Haghighat, Mohammadali Ghaemifar, Armin Attarzadeh, Mohammadreza Piri Sangdeh
similarity 0.69
Abstract · 37 Pages, 24 Figures, 9 Tables

Teleoperation systems are increasingly used in medical, rehabilitation, and remote manipulation applications, where accurate position/force tracking and stable interaction are essential. In such applications, the remote environment may exhibit viscoelasticity, frictional memory, contact transitions, and other dynamic interaction effects, causing the system response to depend not only on the current state but also on its previous evolution. This history dependence, together with communication delays and uncertain nonlinear dynamics, makes accurate uncertainty compensation particularly challenging. Conventional feedforward neural approximators do not inherently retain temporal information, while fully recurrent architectures may introduce additional computational and online training complexity. To address this limitation, this article introduces the first application of a liquid state machine (LSM) to bilateral teleoperation control. A finite-time adaptive controller is developed using a hybrid position/force auxiliary error system with velocity and force filters, while the LSM is employed to estimate uncertain dynamics by exploiting its intrinsic temporal processing and fading-memory capabilities with a simple adaptation mechanism. Closed-loop stability and finite-time convergence are established through a Lyapunov--Krasovskii framework. Simulations in spring--damper and generalized Maxwell viscoelastic environments demonstrate improved position and force tracking and lower mean execution time compared with an RBFNN-based controller.

0.16

Teleoperated Haircutting with Delay Compensation and Passivity-Based Control for Unilateral Internet Teleoperation under Real Communication Uncertainties

cs.RO ·2026-11-18 ·Viridiana Luna-Zempoalteca, Zhendai Huang, Rosalba Galvan-Guerra, Antonio Rosales, Xiaoli Liu +1 more
similarity 0.63
Abstract · 11 pages and 15 figures

Robotic haircutting requires accurate motion execution and reliable communication to safely reproduce the operator's commands. Internet-based teleoperation is a key enabling technology to remotely perform precise manipulation tasks such as haircutting. However, communication uncertainties, including variable transmission delays and packet jitter, degrade synchronization between the master and slave systems and affect tracking performance. This paper presents a unilateral Internet teleoperation framework for robotic haircutting that takes into account experimentally measured communication uncertainties. Three delay-compensation techniques, namely Zero-Order Hold (ZOH), First-Order Hold (FOH), and Low-Pass Filtering (LPF), are evaluated together with a classical proportional-derivative (PD) controller and a passivity-based synchronization controller. Unlike conventional studies based on synthetic delay models, the proposed framework is validated using communication data acquired from a real cloud-based teleoperation platform, where both packet delay and effective delay are characterized. The results demonstrate that combining delay-compensation techniques with passivity-based synchronization improves the robustness of unilateral Internet teleoperation under realistic communication uncertainties, providing a reliable control framework for robotic haircutting applications.

0.21

Wave-Based Bilateral Teleoperation between Nonlinear Manipulators with Direct Contact Force Feedback

eess.SY cs.ROmath.DSmath.OC ·2026-08-20 ·G. Q. Bao Tran, Takanori Miyoshi, Ho Duc Tho
similarity 0.63
Abstract · 65th IEEE Conference on Decision and Control (CDC), Honolulu, HI, USA, Dec. 2026

We study bilateral teleoperation between nonlinear, multi-DOF robotic manipulators in the presence of constant communication delays. Unlike classical wave-transformation architectures that transmit a coordinating force, we consider the case where the environmental force is reflected to the master side to enhance teleoperation transparency. Since direct contact force feedback might destabilize the closed-loop system, we first develop a passivity-shortage characterization for the Euler--Lagrange remote system using a linear matrix inequality (LMI) approach. An upper strictly passive communication law is then employed to compensate for the computed passivity shortage so that the closed-loop stability under delays as well as position and force synchronization are preserved under appropriate conditions. Simulations with nonlinear 2-DOF robotic manipulators in different settings illustrate our approach.

0.36

Safety-Constrained Intelligent Control of a 2-DOF Robotic Manipulator Using Control Barrier Functions

cs.RO eess.SY ·2026-11-09 ·Gabriel da Silva Lima, Made Widhi Surya Atman, Wallace Moreira Bessa
similarity 0.62
Abstract · Paper submitted to the European Control Conference 2027

Control barrier function (CBF) filters depend on dynamic models that can be inaccurate when their parameters and external forces are uncertain. This paper investigates a radial basis function (RBF) neural network compensator whose output is shared by a Cartesian tracking controller and a joint-space CBF filter. An auxiliary state driven by the difference between requested and applied torques corrects the learning signal, reducing the direct influence of filter intervention on adaptation. A two-link manipulator is evaluated through constrained regulation, ablations, matched uncertainty and disturbance trials, and operating-range and timing studies. The results demonstrate that the proposed controller improves tracking while maintaining joint, velocity, and torque limits under parameter uncertainty, and that both the shared compensation and the auxiliary correction contribute to this improvement.

0.28

LETS: Low-Overhead External-Torque Sensing for Force-Feedback Bilateral Teleoperation

cs.RO ·2026-10-10 ·Zonghao Guo, Dongchen Guan, Yubo Wang, Peng Yang
similarity 0.59
Abstract · 8 pages, 7 figures

Bilateral teleoperation with force feedback is becoming increasingly important, and the quality of external-torque estimation is critical to this process. However, manufacturer-provided disturbance-torque estimates on commercial robotic arms are often inaccurate, while the use of end-effector force/torque sensors adds cost and payload. We propose LETS, a physics-guided learning approach that assigns rigid-body dynamics to recursive Newton-Euler inverse dynamics and reserves learning for only the robot-specific residual. LETS uses only the robot's URDF model and joint feedback, deliberately excluding control commands and thereby decoupling external-torque estimation from control-command inputs. It trains on 12 minutes of free-motion data in under one minute, without requiring a dedicated end-effector six-axis force/torque sensor. In bilateral teleoperation, LETS achieves real-time external-torque estimation that enables stable force feedback. Its free-space error is 69% lower than the manufacturer-provided estimate, substantially reducing coupled oscillations between leader and follower; its contact error is 28% lower, yielding more accurate haptic feedback.

0.19

Robust Adaptive Lyapunov-Based MPC for Nonlinear Systems with Experimental Validation on Quadcopter Attitude Control

eess.SY ·2026-11-05 ·Teo Protoulis, Alex Alexandridis
similarity 0.56
Abstract

In this paper, a computationally efficient robust adaptive Lyapunov-based model predictive control (RALMPC) framework is proposed for a class of constrained nonlinear systems subject to uncertainties and external disturbances. A radial basis function neural network (RBFNN), introduced to approximate non-parametric uncertainties, is incorporated into a control Lyapunov function analysis, together with integral barrier Lyapunov functionals for state constraint enforcement. This analysis yields control and adaptation laws for parametric uncertainties, external disturbances, RBFNN weights, and worst-case approximation error, rendering the closed-loop system uniformly bounded while ensuring convergence of tracking errors to compact sets around the origin. The resulting guarantees are then embedded into the RALMPC optimal control problem through a contractive constraint, thus combining formal closed-loop stability with real-time performance optimization; at the same time, the adaptation laws allow the RALMPC prediction model to be updated online. Comparative hardware-in-the-loop simulations against state-of-the-art MPC schemes validate the efficacy and computational efficiency of the proposed framework. Ultimately, RALMPC is experimentally validated on a custom-built quadcopter platform for time-varying attitude tracking, demonstrating its practical feasibility; comparisons against alternative strategies confirm its superiority in achieving improved closed-loop performance.

0.34

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.55
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.24