CS Paper Radar

Super-resolved digital terrain models for GEDI geolocation correction: agreement with airborne LiDAR DTM-based corrections at the beam level, not the footprint level

Natsuki Yuda, Shinichiro Shirota

eess.IV cs.CVphysics.geo-ph ·submitted 2026-11-06 18:36 UTC · v1

Abstract

The Global Ecosystem Dynamics Investigation (GEDI) mission measures three-dimensional forest structure with a LiDAR aboard the International Space Station. GEDI observations have geolocation errors of about 10 m, which cause misalignment with other remote sensing data and reduce the accuracy of downstream tasks. Matching GEDI ground elevations against high-resolution digital terrain models (DTMs) from airborne LiDAR is one way to correct these errors, but such DTMs exist in few regions. To widen this method's applicability, we super-resolved a more widely available low-resolution DTM and used it for the matching. Our question is whether a super-resolved DTM yields the same correction as a 1 m-resolution airborne LiDAR DTM and, if not, why. In steep forests of western Japan, we super-resolved an existing 10 m-resolution DTM to 1 m. Improving its accuracy required fusion with a global 30 m-resolution DTM from a different source. Using the resulting DTM, we corrected GEDI observation positions first by a single shift per ground track, then per observation. For most tracks, the shifts nearly matched those from the airborne LiDAR DTM, likely because DTM errors canceled out across many observations. Per-observation corrections, however, did not match. At a single observation, the error does not cancel out and is too large for the correction. This error likely originates mainly from the input DTM. Therefore, even without a 1 m-resolution DTM, a roughly 10 m-resolution DTM, fused with a global DTM and super-resolved to 1 m, should yield track-wise corrections nearly matching those from a 1 m-resolution DTM.

Comment
Appendices will be added in a future version

Closest papers

Nearest neighbours by meaning across the whole index.

Optimizing GEDI Simulator Configuration for European Temperate Forests

eess.SP physics.geo-phstat.APstat.CO ·2026-09-10 ·Selim Behloul, Nikola Besic, Steven Hancock, Cedric Vega, Sylvie Durrieu +3 more
similarity 0.62
Abstract · Submitted to AGU Earth and Space Science (ESS). Presented at EGU General Assembly 2026, Vienna, Austria, abstract EGU26-9762. DOI: https://d…

Accurate estimation of aboveground biomass density is essential for quantifying forest carbon stocks. NASA's GEDI mission provides valuable canopy structure data, but its sparse sampling necessitates the use of simulators to calibrate biomass models at field inventory locations. The widely used simulator of Hancock et al. (2019) emulates GEDI waveforms from airborne LiDAR point clouds, yet it has never been validated over European temperate forests. Here, we compare approximately 8,100 pairs of observed and simulated GEDI relative height (RH) profiles across French forests using the national airborne LiDAR program as input. We separate two sources of error: waveform modeling differences, assessed by referencing both simulated and real RH metrics to a common ALS-derived ground elevation, and ground detection bias, evaluated by comparing each GEDI L2A processing algorithm against the ALS reference. Under the baseline configuration, the mean absolute bias across the full RH profile reaches 0.67 m in leaf-on and 1.20 m in leaf-off conditions. Switching to intensity-based return weighting and selecting the a3 L2A algorithm reduces these biases to 0.43 m and 0.42 m respectively. The a3 algorithm also achieves near-unbiased ground detection (+0.04 m versus -0.82 m for the default), directly reducing a previously overlooked source of error. We also show that leaf-off acquisitions and low-sensitivity shots, both typically excluded from standard biomass products, are simulated as reliably as their counterparts, substantially expanding the potential calibration and inference datasets.

0.29

Sub-Meter Canopy Height Synthesis from Sentinel-2 via Anchored Residual Flow

cs.CV cs.LG ·2026-11-17 ·Kiarie Ndegwa, Tony Chang, Andreas Gros, Vincent A. Landau, David D. Diaz +3 more
hot direction similarity 0.59
Abstract · 30 pages, including appendices

Canopy height models (CHMs) - per-pixel maps of vegetation top height - are essential for forest carbon accounting, wildfire fuel mapping, and tree-level ecology, yet sub-meter CHMs require airborne LiDAR refreshed on multi-year national cycles. We produce 0.5 m CHMs from free 10 m Sentinel-2 imagery, a 20$\times$ cross-modal super-resolution task where optical reflectance must predict geometric height it does not directly observe. Motivated by the perception-distortion trade-off, we derive two operating points with shared conditioning. A deterministic regressor (Anchor) targets low distortion; a conditional flow matching model, trained on the Anchor's residual in a learned CHM latent space (AR-flow), targets perceptual fidelity. Trained on 197k LiDAR-paired tiles spanning 69 ecoregions across the contiguous United States and evaluated on 2,530 held-out tiles against eight baselines, the Anchor achieves 2.83 m MAE using only free satellite input. The AR-flow reduces sliced Wasserstein distance from the Anchor's 1.13 to 0.208, at a higher MAE of 3.68 m. Crown-scale statistics improve, but strict individual-tree detection remains weak: generated sub-pixel detail represents plausible structure rather than measured individual trees. Quarterly continental refresh becomes tractable, letting satellite monitoring inform timing and extent for more expensive data acquisitions.

0.39

Agreement Is Not Accuracy: LiDAR Elevation Errors Hidden in LiDAR-Camera Extrinsics

cs.CV ·2026-11-18 ·Yeon Kun Lee, Dongseok Yang, Deok-Kyeong Jang, Choongho Chung, Junyoung Lee +1 more
similarity 0.58
Abstract · 14 pages, 6 figures, including supplementary material

LiDAR and cameras provide complementary measurements for 3D vision, yet agreement between their observations does not establish the accuracy of either sensor's internal geometry. We show that systematic LiDAR elevation biases can be absorbed into the estimated extrinsics. Using synchronized LiDAR intensities and camera-estimated checkerboard poses, we jointly estimate a sensor-specific elevation correction shared across recordings and extrinsics for each recording. Ray-plane intersections locate the checker pattern without using reported ranges, preventing range errors from directly moving the lookup. Under matched intensity and correction models, this lookup gives smaller camera-consistency residuals than measured-point lookup. Across six identically designed rigs using the same sensor models, recording-excluded corrections reduce the mean translation-reference distance from 7.57 to 3.04 mm. On separate structures, they reduce inter-plane angle errors against references from independent dense camera scans and improve image-edge alignment. Rolling the rigs shifts the plane pairs exhibiting the largest angular improvements, as predicted for an elevation-only correction. Within the ray-plane model, calibration-target projections and loop-consistency residuals change little despite these geometric improvements. These findings show why agreement after extrinsic calibration need not establish correct internal LiDAR geometry. Synchronized observations of a familiar checkerboard provide a practical route to estimating and testing elevation corrections without a dedicated large calibration field. We plan to release code and data for reproducing the main results.

0.25

TNVD-SC: Diagnosing Scan Context Failures in Forests with Terrain-Normalized Vertical Distributions

cs.CV cs.RO ·2026-10-19 ·Jineon Kim, Jhonghyun An
similarity 0.58
Abstract · 8 pages, 5 figures

Long-term LiDAR place recognition in forests is difficult because repetitive vegetation and uneven terrain create severe structural aliasing. We diagnose Scan Context (SC) by separating candidate retrieval from fine matching: on the standardized TreeLoc++ Wild-Places protocol, a TNVD support key places a valid location in the top-25 set for approximately 99% of queries, while conventional SC matching on those candidates reaches only 61.84% mean R@1. With an identical raw-SC candidate set, terrain normalization improves max-height cells by only 1.21 points but vertical-distribution cells by 19.72 points. These observations motivate Terrain-Normalized Vertical Distribution Scan Context (TNVD-SC), which preserves the SC ring-sector topology while encoding terrain-relative vertical probability distributions. Under the standardized TreeLoc++ protocol, TNVD-SC reaches 91.83% mean R@1 and attains the highest R@1 mean and R@1 stability among the compared methods, while TreeLoc++ remains stronger in mean MR, MF1, and AUC. The unchanged method reaches 85.14% mean R@1 on the four-session CVTNet-style NCLT evaluation. A lossless count-coded implementation with exact hierarchical Jensen-Shannon search reduces descriptor payload by 3.86x and compute latency by 23.8% without changing the audited retrieval outputs.

0.26

Efficient Continuous DEM Reconstruction under Limited Target-Resolution Supervision

cs.CV cs.LGeess.IV ·2026-09-24 ·Zekai Shi, Meng Zhang, Haokun Zhang, Bo Zhang
similarity 0.57
Abstract · 19 pages, 15 figures

High-resolution digital elevation models (DEMs) support Earth observation applications, but paired training references are often available only at coarser output resolutions. Reconstructing finer terrain grids therefore requires both effective transfer beyond the supervised scale and control of dense-query computation. To address this problem, SCOPE learns a continuous terrain representation from coarser-resolution pairs. It predicts a latent coefficient field on the low-resolution grid and reuses local Fourier residual functions through basis evaluation and geometry-guided ensemble fusion. This separates high-dimensional coefficient prediction from output-grid construction. Experiments on geographically distributed land--ocean samples assess supervised reconstruction, unseen-scale inference, cross-domain generalization, and theoretical computation. SCOPE leads the compared methods across six metrics in the main supervised-scale evaluation. At an unseen factor three times the training factor, land reconstruction reduces RMSE and MAE by approximately 12\% relative to bicubic interpolation, with errors close to target-scale fine-tuning. Ninefold output density increases counted multiply--accumulate operations by only about 2\%. Frozen-model validation on held-out external marine regions reduces RMSE relative to the DEM-specific implicit baseline EBCF-CDEM by approximately 19\% under self-downsampling and 2\% with cross-product inputs, while also yielding lower RMSE than LIIF-MS in both settings. These results demonstrate the value of reusable coefficient fields for accurate reconstruction beyond the supervised resolution with low incremental arithmetic cost.

0.22

Observation Quality in DSM-Assisted Aerial Localization: A Benchmark and Base-Anchored Uncertainty Calibration

cs.CV ·2026-10-13 ·Pengyu Yin, Jie Pan, Junxiang Tan, Mengqi Fu, Kun Cheng +1 more
benchmark similarity 0.57
Abstract · 15 pages, 7 figures, 7 tables. Submitted to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Aerial map matching provides position observations for navigation, but a position error alone does not determine how an observation should be weighted. We define five benchmark tasks: position availability and agreement, grouped error structure, predictive uncertainty, controlled updates, and temporal accumulation. We use digital-surface-model-assisted localization to test whether base-anchored uncertainty calibration improves the weighting of unchanged position estimates. The method combines propagated image and map sensitivities with the second moment of a compact configuration subset relative to the reported position. Scale is fitted using separate position references without local surface-height ground truth. Thirteen covariance models are evaluated on two held-out query sets from locations represented in the calibration data. Using reference residuals, we compare the method with a constant full-matrix baseline. With all localization failures included, the method reduces the normalized position-update risk, averaged equally across locations, by 7.70% on 728 conditions and 5.46% on a separate 142 conditions under an independent prior. On the primary set, the equal-location average negative log likelihood on reference residuals improves by 2.571 nat. At these seen locations, exploratory base-only quality calibration and conditional-addition controls leave the incremental update benefit of configuration disagreement unresolved. Navigation benefit and real temporal accumulation remain untested.

0.23

Guided Super-Resolution of Digital Elevation Models with Diffusion-Based Image Generators

cs.CV ·2026-09-10 ·Armand Mihai Nicolicioiu, Dominik Narnhofer, Nando Metzger, Daniel Panangian, Ksenia Bittner +1 more
similarity 0.55
Abstract

High-resolution digital surface models (DSMs) play an important role in urban analysis, 3D building reconstruction, and infrastructure monitoring, yet their availability remains limited due to the high cost and complexity of data acquisition. In contrast, coarse DSMs from commercial satellite missions are widely accessible, and high-resolution optical imagery is increasingly available from aerial and satellite platforms. We address the resulting mismatch in spatial resolution and propose a DSM superresolution approach that enhances 5 m DSMs to 0.5 m resolution, using guidance from high-resolution spectral images. Our method employs denoising diffusion to transfer information that is visible only in the image, like crisp outlines and detailed roof structures, into the elevation maps. In this way, surface details are reconstructed more accurately than with conventional interpolation or filtering techniques. Experiments on several cities in Central Europe demonstrate that the proposed approach produces high-quality DSMs with improved structural detail and accurate surface geometry. Our results highlight the potential of guided super-resolution with foundational image priors as a means of reconstructing high-resolution surface models.

0.35

Wall-to-wall maps of canopy height and aboveground carbon across the Atlantic Forest

cs.CV ·2026-11-17 ·Matheus Pinheiro Ferreira, Thiago Carmuega Rabaçal, Giulio Brossi Santoro, Giovanna de Andrade Ferreira, Rodrigo Costa Pinto +13 more
similarity 0.54
Abstract · 56 pages, 13 figures, 8 tables, 2 supplementary tables. Submitted to Scientific Data. Maps and code openly available via Zenodo and GitHub

Global canopy height maps are increasingly used to estimate forest carbon, yet their regional accuracy is rarely tested. We present wall-to-wall maps of canopy height (10 m) and aboveground carbon density (30 m) for the Brazilian Atlantic Forest in 2024. Height was predicted by a deep learning network fusing Sentinel-2 reflectance, Sentinel-1 and ALOS PALSAR backscatter and ALOS elevation, trained on 7,179 and tested on 1,793 patches (58,800 km$^2$) from a statewide airborne LiDAR campaign over São Paulo state, Brazil. On held-out test patches, the mean absolute error is 2.26 m at 10 m and 1.90 m at 30 m, and the model was validated at two LiDAR sites outside São Paulo. Over the same pixels, the Meta and World Resources Institute global product has more than twice this error. A power law fitted to 124 inventory plots converted canopy height to above ground carbon density. The remaining forest holds 1,944 TgC over 28.3 Mha. Global products therefore need local validation before use in carbon accounting.

0.35