CS Paper Radar

Optimizing GEDI Simulator Configuration for European Temperate Forests

Selim Behloul, Nikola Besic, Steven Hancock, Cedric Vega, Sylvie Durrieu, Jean-Pierre Renaud, Ibrahim Fayad, Philippe Ciais

eess.SP physics.geo-phstat.APstat.CO ·submitted 2026-09-10 12:10 UTC · v2

Abstract

Accurate estimation of aboveground biomass density is essential for quantifying forest carbon stocks. NASA's GEDI mission provides valuable canopy structure data, but its sparse sampling necessitates the use of simulators to calibrate biomass models at field inventory locations. The widely used simulator of Hancock et al. (2019) emulates GEDI waveforms from airborne LiDAR point clouds, yet it has never been validated over European temperate forests. Here, we compare approximately 8,100 pairs of observed and simulated GEDI relative height (RH) profiles across French forests using the national airborne LiDAR program as input. We separate two sources of error: waveform modeling differences, assessed by referencing both simulated and real RH metrics to a common ALS-derived ground elevation, and ground detection bias, evaluated by comparing each GEDI L2A processing algorithm against the ALS reference. Under the baseline configuration, the mean absolute bias across the full RH profile reaches 0.67 m in leaf-on and 1.20 m in leaf-off conditions. Switching to intensity-based return weighting and selecting the a3 L2A algorithm reduces these biases to 0.43 m and 0.42 m respectively. The a3 algorithm also achieves near-unbiased ground detection (+0.04 m versus -0.82 m for the default), directly reducing a previously overlooked source of error. We also show that leaf-off acquisitions and low-sensitivity shots, both typically excluded from standard biomass products, are simulated as reliably as their counterparts, substantially expanding the potential calibration and inference datasets.

Comment
Submitted to AGU Earth and Space Science (ESS). Presented at EGU General Assembly 2026, Vienna, Austria, abstract EGU26-9762. DOI: https://doi.org/10.5194/egusphere-egu26-9762

Closest papers

Nearest neighbours by meaning across the whole index.

Wall-to-wall maps of canopy height and aboveground carbon across the Atlantic Forest

cs.CV ·2026-11-17 ·Matheus Pinheiro Ferreira, Thiago Carmuega Rabaçal, Giulio Brossi Santoro, Giovanna de Andrade Ferreira, Rodrigo Costa Pinto +13 more
similarity 0.68
Abstract · 56 pages, 13 figures, 8 tables, 2 supplementary tables. Submitted to Scientific Data. Maps and code openly available via Zenodo and GitHub

Global canopy height maps are increasingly used to estimate forest carbon, yet their regional accuracy is rarely tested. We present wall-to-wall maps of canopy height (10 m) and aboveground carbon density (30 m) for the Brazilian Atlantic Forest in 2024. Height was predicted by a deep learning network fusing Sentinel-2 reflectance, Sentinel-1 and ALOS PALSAR backscatter and ALOS elevation, trained on 7,179 and tested on 1,793 patches (58,800 km$^2$) from a statewide airborne LiDAR campaign over São Paulo state, Brazil. On held-out test patches, the mean absolute error is 2.26 m at 10 m and 1.90 m at 30 m, and the model was validated at two LiDAR sites outside São Paulo. Over the same pixels, the Meta and World Resources Institute global product has more than twice this error. A power law fitted to 124 inventory plots converted canopy height to above ground carbon density. The remaining forest holds 1,944 TgC over 28.3 Mha. Global products therefore need local validation before use in carbon accounting.

0.35

Super-resolved digital terrain models for GEDI geolocation correction: agreement with airborne LiDAR DTM-based corrections at the beam level, not the footprint level

eess.IV cs.CVphysics.geo-ph ·2026-11-06 ·Natsuki Yuda, Shinichiro Shirota
similarity 0.62
Abstract · Appendices will be added in a future version

The Global Ecosystem Dynamics Investigation (GEDI) mission measures three-dimensional forest structure with a LiDAR aboard the International Space Station. GEDI observations have geolocation errors of about 10 m, which cause misalignment with other remote sensing data and reduce the accuracy of downstream tasks. Matching GEDI ground elevations against high-resolution digital terrain models (DTMs) from airborne LiDAR is one way to correct these errors, but such DTMs exist in few regions. To widen this method's applicability, we super-resolved a more widely available low-resolution DTM and used it for the matching. Our question is whether a super-resolved DTM yields the same correction as a 1 m-resolution airborne LiDAR DTM and, if not, why. In steep forests of western Japan, we super-resolved an existing 10 m-resolution DTM to 1 m. Improving its accuracy required fusion with a global 30 m-resolution DTM from a different source. Using the resulting DTM, we corrected GEDI observation positions first by a single shift per ground track, then per observation. For most tracks, the shifts nearly matched those from the airborne LiDAR DTM, likely because DTM errors canceled out across many observations. Per-observation corrections, however, did not match. At a single observation, the error does not cancel out and is too large for the correction. This error likely originates mainly from the input DTM. Therefore, even without a 1 m-resolution DTM, a roughly 10 m-resolution DTM, fused with a global DTM and super-resolved to 1 m, should yield track-wise corrections nearly matching those from a 1 m-resolution DTM.

0.25

Transferable Above-Ground Biomass (AGB) Estimation Model from Multi-Sensor Data with Sparse Field Calibration

cs.LG cs.CV ·2026-08-12 ·Pann Thinzar Seint, Bryan Atwood, Subas Chhatkuli
similarity 0.60
Abstract

Spatially continuous quantification of forest above-ground biomass (AGB) is what makes carbon accounting credible and mitigation strategies actionable. While field inventories provide high localized accuracy, they are spatially sparse; conversely, spaceborne LiDAR from the Global Ecosystem Dynamics Investigation (GEDI) offers broad biomass samples but lacks spatial continuity and systematic underestimation of high-biomass forests. This paper presents an operational framework centered on a single globally trained convolutional neural network (CNN) that is seamlessly adapted to each new landscape through a lightweight empirical field-calibration workflow. The global model combines optical (Sentinel-2), C-band SAR (Sentinel-1), L-band SAR (ALOS-2 PALSAR-2), and terrain (DEM) data. It is trained once against GEDI Level-4A biomass reference data spanning multiple regions and both wet and dry seasons so that it learns the persistent woody-structure rather than a single-date appearance. To avoid retraining for every landscape, the framework applies a small number of local field plots to fit a scale-and-bias correction that aligns the global prediction with ground truth in each region. The pipeline harmonizes sensor data onto a shared 10 m grid, derives vegetation indices and polarimetric ratios, computes per-band normalization stats, and trains the CNN with a hybrid log-domain SmoothL1 with RMSE loss for skewed biomass distribution. On held-out validation the global GEDI-based model achieved R^2 approximately 0.78 and RMSE approximately 22 Mg/ha. A subsequent field calibration combining Random Forest fine-tuning under a 10-fold cross-validation eliminates localized regional biases. This improves local validation performance to R^2 approximately 0.82 and reduces RMSE to approximately 15 Mg/ha, outperforming both the uncalibrated global model and the ESA CCI Biomass product against field plots.

0.04

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.59
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

Sub-Meter Canopy Height Synthesis from Sentinel-2 via Anchored Residual Flow

cs.CV cs.LG ·2026-11-17 ·Kiarie Ndegwa, Tony Chang, Andreas Gros, Vincent A. Landau, David D. Diaz +3 more
hot direction similarity 0.57
Abstract · 30 pages, including appendices

Canopy height models (CHMs) - per-pixel maps of vegetation top height - are essential for forest carbon accounting, wildfire fuel mapping, and tree-level ecology, yet sub-meter CHMs require airborne LiDAR refreshed on multi-year national cycles. We produce 0.5 m CHMs from free 10 m Sentinel-2 imagery, a 20$\times$ cross-modal super-resolution task where optical reflectance must predict geometric height it does not directly observe. Motivated by the perception-distortion trade-off, we derive two operating points with shared conditioning. A deterministic regressor (Anchor) targets low distortion; a conditional flow matching model, trained on the Anchor's residual in a learned CHM latent space (AR-flow), targets perceptual fidelity. Trained on 197k LiDAR-paired tiles spanning 69 ecoregions across the contiguous United States and evaluated on 2,530 held-out tiles against eight baselines, the Anchor achieves 2.83 m MAE using only free satellite input. The AR-flow reduces sliced Wasserstein distance from the Anchor's 1.13 to 0.208, at a higher MAE of 3.68 m. Crown-scale statistics improve, but strict individual-tree detection remains weak: generated sub-pixel detail represents plausible structure rather than measured individual trees. Quarterly continental refresh becomes tractable, letting satellite monitoring inform timing and extent for more expensive data acquisitions.

0.39

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.57
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

Characterizing the vertical continuity of fuel strata based on TLS point clouds Gaussian decomposition and overlap metrics

cs.CV eess.SP ·2026-11-03 ·Jesús Torralba, Luis Á. Ruiz, Pablo Crespo-Peremarch, Marina Simó-Martí, Juan Pedro Carbonell-Rivera
unusual similarity 0.56
Abstract · 45 pages, 15 figures Author affiliations and ORCID: Jesús Torralba https://orcid.org/0000-0001-8644-8604 , Luis Á. Ruiz https://orcid.org/00…

Vertical forest structure influences fire behavior by regulating understory-to-canopy fuel connectivity, yet operational fuel-type models represent this complexity through discrete classes that only indirectly capture vertical continuity. High-density point clouds offer an opportunity to characterize vertical fuel connectivity in a more explicit and continuous manner, but specific methodological approaches are still required. We applied Gaussian decomposition to vertical height profiles derived from terrestrial laser scanning (TLS) point clouds across 25 permanent forest plots to characterize geometric vertical fuel continuity. A multiscale analysis spanning from the plot scale to ~0.5 $m^2$ units was used to evaluate geometric, probabilistic, and overlap metrics for characterizing fuel strata. The method reproduced the vertical transition between shrub and tree strata, with median Pearson correlations ranging from 0.83 to 0.96 across analysis levels. Probability density overlap metrics and separability indicators, such as the Jeffries-Matusita distance, provided complementary descriptors of vertical continuity. Intermediate spatial scales (3-6 m cells) provided a useful compromise between spatial detail and the consistent representation of shrub-canopy interaction patterns. Finer scales increased variability due to point density reduction and profile irregularity, and low mean squared error values were found insufficient as sole performance indicators. Gaussian decomposition applied to TLS point clouds enables explicit quantification of vertical fuel continuity, a limitation of current discrete classification systems. Continuous vertical connectivity metrics derived from this approach offer a pathway for improving ladder fuel characterization and strengthening decision-making support in wildfire risk assessment.

0.36

Effects of Laser Beam Width and Measurement Noise on Tree Diameter Estimation in Laser Scanning

cs.CV ·2026-11-10 ·Jesse Muhojoki, Nuutti Ervasti, Eric Hyyppä, Aapo Erkkilä, Eppu Honkanen +3 more
unusual similarity 0.55
Abstract

Laser scanning has been utilized for decades to measure tree structure and geometry. Despite continuous advances in sensor technology, uncertainties arising from scanner characteristics and measurement conditions has remained relevant sources of error. In particular, factors such as laser beam diameter can introduce both systematic and random errors in the reconstructed tree geometry. This study investigates the main sources of these errors in mobile laser scanning (MLS) and quantifies their effects on stem curve (stem diameter) estimation. We discovered through simulations and experiments that the heteroscedasticity (difference in variance in ranging and scan angle) in the measurement noise is a key factor along with the beam width of the lidar, which cause the bias of the diameter estimates to depend not only on distance, but also on the tree diameter. We demonstrated that this bias can be reliably predicted and negated for trees with a diameter at the breast height greater than 10 cm using technical specifications of the sensor without any additional calibration. In experiments, the proposed bias compensation method reduced the root-mean-square error of stem diameter estimates to sub-centimeter level on boreal forest test sites. However, for small trees with diameter below 10 cm, the diameter bias becomes sensitive to the diameter of the tree$\unicode{x2013}$an unknown factor$\unicode{x2013}$and other factors, such as different bark and out-of-roundness of the stem, limiting the precision of lidar for measuring geometry of trees and applicability of the presented method.

0.24