CS Paper Radar

Effects of Laser Beam Width and Measurement Noise on Tree Diameter Estimation in Laser Scanning

Jesse Muhojoki, Nuutti Ervasti, Eric Hyyppä, Aapo Erkkilä, Eppu Honkanen, Tuomas Yrttimaa, Mikko Vastaranta, Juha Hyyppä

cs.CV ·submitted 2026-11-10 08:40 UTC · v1
unusual

Abstract

Laser scanning has been utilized for decades to measure tree structure and geometry. Despite continuous advances in sensor technology, uncertainties arising from scanner characteristics and measurement conditions has remained relevant sources of error. In particular, factors such as laser beam diameter can introduce both systematic and random errors in the reconstructed tree geometry. This study investigates the main sources of these errors in mobile laser scanning (MLS) and quantifies their effects on stem curve (stem diameter) estimation. We discovered through simulations and experiments that the heteroscedasticity (difference in variance in ranging and scan angle) in the measurement noise is a key factor along with the beam width of the lidar, which cause the bias of the diameter estimates to depend not only on distance, but also on the tree diameter. We demonstrated that this bias can be reliably predicted and negated for trees with a diameter at the breast height greater than 10 cm using technical specifications of the sensor without any additional calibration. In experiments, the proposed bias compensation method reduced the root-mean-square error of stem diameter estimates to sub-centimeter level on boreal forest test sites. However, for small trees with diameter below 10 cm, the diameter bias becomes sensitive to the diameter of the tree$\unicode{x2013}$an unknown factor$\unicode{x2013}$and other factors, such as different bark and out-of-roundness of the stem, limiting the precision of lidar for measuring geometry of trees and applicability of the presented method.

Closest papers

Nearest neighbours by meaning across the whole index.

Optimizing GEDI Simulator Configuration for European Temperate Forests

eess.SP physics.geo-phstat.APstat.CO ·2026-09-10 ·Selim Behloul, Nikola Besic, Steven Hancock, Cedric Vega, Sylvie Durrieu +3 more
similarity 0.55
Abstract · Submitted to AGU Earth and Space Science (ESS). Presented at EGU General Assembly 2026, Vienna, Austria, abstract EGU26-9762. DOI: https://d…

Accurate estimation of aboveground biomass density is essential for quantifying forest carbon stocks. NASA's GEDI mission provides valuable canopy structure data, but its sparse sampling necessitates the use of simulators to calibrate biomass models at field inventory locations. The widely used simulator of Hancock et al. (2019) emulates GEDI waveforms from airborne LiDAR point clouds, yet it has never been validated over European temperate forests. Here, we compare approximately 8,100 pairs of observed and simulated GEDI relative height (RH) profiles across French forests using the national airborne LiDAR program as input. We separate two sources of error: waveform modeling differences, assessed by referencing both simulated and real RH metrics to a common ALS-derived ground elevation, and ground detection bias, evaluated by comparing each GEDI L2A processing algorithm against the ALS reference. Under the baseline configuration, the mean absolute bias across the full RH profile reaches 0.67 m in leaf-on and 1.20 m in leaf-off conditions. Switching to intensity-based return weighting and selecting the a3 L2A algorithm reduces these biases to 0.43 m and 0.42 m respectively. The a3 algorithm also achieves near-unbiased ground detection (+0.04 m versus -0.82 m for the default), directly reducing a previously overlooked source of error. We also show that leaf-off acquisitions and low-sensitivity shots, both typically excluded from standard biomass products, are simulated as reliably as their counterparts, substantially expanding the potential calibration and inference datasets.

0.29

Wall-to-wall maps of canopy height and aboveground carbon across the Atlantic Forest

cs.CV ·2026-11-17 ·Matheus Pinheiro Ferreira, Thiago Carmuega Rabaçal, Giulio Brossi Santoro, Giovanna de Andrade Ferreira, Rodrigo Costa Pinto +13 more
similarity 0.53
Abstract · 56 pages, 13 figures, 8 tables, 2 supplementary tables. Submitted to Scientific Data. Maps and code openly available via Zenodo and GitHub

Global canopy height maps are increasingly used to estimate forest carbon, yet their regional accuracy is rarely tested. We present wall-to-wall maps of canopy height (10 m) and aboveground carbon density (30 m) for the Brazilian Atlantic Forest in 2024. Height was predicted by a deep learning network fusing Sentinel-2 reflectance, Sentinel-1 and ALOS PALSAR backscatter and ALOS elevation, trained on 7,179 and tested on 1,793 patches (58,800 km$^2$) from a statewide airborne LiDAR campaign over São Paulo state, Brazil. On held-out test patches, the mean absolute error is 2.26 m at 10 m and 1.90 m at 30 m, and the model was validated at two LiDAR sites outside São Paulo. Over the same pixels, the Meta and World Resources Institute global product has more than twice this error. A power law fitted to 124 inventory plots converted canopy height to above ground carbon density. The remaining forest holds 1,944 TgC over 28.3 Mha. Global products therefore need local validation before use in carbon accounting.

0.35

Sparse tensor networks for individual tree diameter estimation in mixed forests

cs.CV ·2026-10-27 ·Clara Lößl, Fabian Ewald Fassnacht, Viacheslav Barkov
similarity 0.53
Abstract

Measurements of tree diameter at breast height (DBH) are fundamental to forest inventories, but manual surveys across entire stands or regions are impractical. UAV-borne laser scanning (ULS) enables scalable automated forest surveys, yet canopy occlusion makes accurate DBH estimation from ULS point clouds non-trivial. Limited stem-level point density of ULS data constrains approaches relying on detailed stem reconstruction, such as Quantitative Structure Models (QSMs) and circle fitting. Empirical machine learning methods based on predefined point cloud metrics are an alternative. New deep learning approaches offer an even more principled solution, allowing models to learn directly from point clouds. Sparse tensor networks have shown particular promise, transforming forestry tasks such as tree species classification. We investigate whether these strengths can be extended to estimate individual tree DBH from ULS data across four mixed-species temperate forest plots in Germany. We further advance existing sparse tensor networks by introducing TreeNext, a lightweight deep learning architecture for direct individual tree parameter estimation from voxelized LiDAR point clouds. We present a fully automated forest inventory pipeline from individual tree instance segmentation to DBH regression, and quantify the impact of segmentation errors by comparing performance on automatically segmented and ground truth instances. TreeNext achieves an $R^2$ of 0.8355 on automatically segmented trees and 0.9380 on ground truth segments, outperforming strong tabular baselines including Random Forest and XGBoost. Segmentation quality emerges as the dominant error source in the automated pipeline. TreeNext proves highly data-efficient, performing well even in small data scenarios. Our findings establish sparse tensor networks as a practical foundation for automated individual tree DBH estimation from ULS.

0.20

LiDAR Resolution Recovery via Foundation-Model-Guided Diffusion

cs.CV ·2026-10-06 ·Samed Doğan, Nico Leuze, Alfred Schöttl
similarity 0.52
Abstract

High-beam-count LiDAR sensors are costly, yet many perception pipelines require dense angular sampling. Using a pretrained Stable Diffusion model as the backbone, we fine-tune a LiDAR-conditioned depth model with pseudo-depth targets from a 2D foundation model. During training, the LiDAR conditioning is randomly decimated at different beam budgets. We then investigate how much of a LiDAR scan can be recovered from heavily decimated input and characterize performance across the input beam budget. We evaluate against physically held-out real beams on nuScenes and report recovery separately from fit accuracy. Our model yields its largest advantage in very sparse regimes, achieving a $δ_{1.25}$ accuracy of $66.8$% from $4$-beam input where scattered interpolation reaches only $45.1$%. A class-stratified error breakdown further reveals that planar surfaces recover first while objects introducing depth discontinuities degrade earliest. Together, these results quantify the recovery/resolution trade-off for foundation-model-guided LiDAR enhancement.

0.20

Agreement Is Not Accuracy: LiDAR Elevation Errors Hidden in LiDAR-Camera Extrinsics

cs.CV ·2026-11-18 ·Yeon Kun Lee, Dongseok Yang, Deok-Kyeong Jang, Choongho Chung, Junyoung Lee +1 more
similarity 0.52
Abstract · 14 pages, 6 figures, including supplementary material

LiDAR and cameras provide complementary measurements for 3D vision, yet agreement between their observations does not establish the accuracy of either sensor's internal geometry. We show that systematic LiDAR elevation biases can be absorbed into the estimated extrinsics. Using synchronized LiDAR intensities and camera-estimated checkerboard poses, we jointly estimate a sensor-specific elevation correction shared across recordings and extrinsics for each recording. Ray-plane intersections locate the checker pattern without using reported ranges, preventing range errors from directly moving the lookup. Under matched intensity and correction models, this lookup gives smaller camera-consistency residuals than measured-point lookup. Across six identically designed rigs using the same sensor models, recording-excluded corrections reduce the mean translation-reference distance from 7.57 to 3.04 mm. On separate structures, they reduce inter-plane angle errors against references from independent dense camera scans and improve image-edge alignment. Rolling the rigs shifts the plane pairs exhibiting the largest angular improvements, as predicted for an elevation-only correction. Within the ray-plane model, calibration-target projections and loop-consistency residuals change little despite these geometric improvements. These findings show why agreement after extrinsic calibration need not establish correct internal LiDAR geometry. Synchronized observations of a familiar checkerboard provide a practical route to estimating and testing elevation corrections without a dedicated large calibration field. We plan to release code and data for reproducing the main results.

0.25

NM-LIO: Multiple LiDAR-Inertial Odometry Addressing LiDAR Measurement Noise Discrepancy

cs.RO ·2026-10-03 ·Gunhee Shin, Seungjae Lee, Minho Oh, Dongkyu Lee, Jaeyoung Lee +2 more
published similarity 0.51
Abstract · 10 pages, 3 figures, 1 table. Published in the International Conference on Robot Intelligence Technology and Applications (RiTA 2024)

Multiple LiDAR-inertial odometry methods have been widely applied in robotic applications owing to their enhanced accuracy and reliability. However, adopting multiple LiDAR systems can be challenging due to the discrepancies in measurement noise across different LiDARs. Existing methods have typically overlooked the noise discrepancies, which can significantly affect accuracy. In this paper, we propose Noise-aware Multiple LiDAR-Inertial Odometry (NM-LIO) that addresses the noise discrepancies. We integrate a noise model to quantify the measurement noise of each LiDAR. Additionally, we estimate the uncertainty of the residuals based on the measurement noise, allowing the measurement model to capture the noise discrepancies. Our proposed method is evaluated on a public multiple LiDAR dataset and compared with state-of-the-art methods. The experimental results demonstrate that the proposed method can accurately estimate the odometry in various environments by accounting for the noise discrepancies.

0.27

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.50
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

Distributed ISAC-Enabled Multimodal Recovery of Missing 2-D LiDAR Measurements

eess.SY ·2026-09-19 ·Mohammed E Eltayeb
similarity 0.49
Abstract

Recovering missing regions in 2-D LiDAR scans is crucial for maintaining geometric awareness in environmental sensing. LiDAR-only reconstruction relies on measurements surrounding the missing region and can degrade as the unobserved sector grows or the surface geometry becomes more complex. This paper presents a distributed integrated sensing and communication (ISAC) framework that uses directional 60-GHz beam-training measurements from multiple receivers to assist in the recovery of missing regions in 2-D LiDAR scans. Transmitter and receiver positions, beam directions, and relative beam-power thresholding are used to construct an RF-derived surface prior without requiring RF time-of-flight measurements. The resulting RF-derived range estimates are then fused with LiDAR measurements to estimate the missing geometry. The proposed framework is evaluated in an indoor environment using LiDAR and 60-GHz phased-array measurements from 55 receiver viewpoints comprising 37,620 beam-pair power measurements across 72 controlled missing-sector cases. The results show that RF-assisted reconstruction provides larger accuracy gains as the missing-sector width increases. For the 80-degree missing-sector case investigated in this paper, RF+polar fusion is shown to reduce the mean absolute error (MAE) from 2.271 m for polar LiDAR interpolation to 0.617 m, corresponding to a 72.8% reduction. The results further show that useful RF-assisted recovery can be maintained even with fewer beam-pair measurements under limited beam training. These findings demonstrate that directional communication measurements can support environmental sensing by providing complementary geometric information for missing LiDAR regions.

0.11