CS Paper Radar

ClearForm: Shared-Surface Gaussian Splatting for Transparent and Opaque Scenes

Hajeong Lee, Jong-Il Park

cs.CV ·submitted 2026-11-07 01:12 UTC · v1
code/data

Abstract

Transparent-interface reconstruction must recover glass surfaces even when most observed color comes from the scene behind them. We present ClearForm, a shared-planar-Gaussian method for jointly reconstructing transparent interfaces and the appearance seen through them. We identify and analyze the Geometry-Appearance Compositing Dilemma (GACD): when the same transparency-dependent alpha controls both color and geometry, revealing the background can weaken a transparent surface's contribution to geometric reconstruction. We derive its effect on plane-based depth estimation, identify a mechanism that can weaken geometric learning, and quantify the loss of interface support through controlled comparisons. To address this conflict, we develop geometry-preserving dual-opacity surface reconstruction. Shared planar Gaussians retain interface contributions in geometry compositing while modeling transmission and sparse reflection in RGB, supported by transparency-aware geometric constraints. To manage the different primitive-visibility requirements of these compositors, we introduce Dual-Evidence Lifecycle (DEL), which retains Gaussians supported by multi-view geometry or RGB reconstruction evidence. On 3D-FRONT-T, ClearForm achieves 27.05 mm Chamfer distance (CD) and 0.928 F1, compared with 59.18 mm CD for our PGSR reproduction and the reported 34 mm CD and 0.836 F1 for GLINT. On TransLab, it achieves 1.65 mm CD, 0.963 F1, and 40.14 dB PSNR. In matched ablations, dual-opacity compositing reduces CD from 59.25 to 27.09 mm, while DEL improves PSNR by 2.06 dB. Our project page is available at https://hajeongx.github.io/clearform/.

Comment
15 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

RGS: Reflection-aware Gaussian Splatting via Learning Geometry Continuity for Reflective Objects

cs.CV ·2026-09-16 ·Xiaobiao Du, Yida Wang, Cheng Bi, Kun Zhan, Xin Yu
top venuecode/data similarity 0.74
Abstract · Project Page: https://xiaobiaodu.github.io/reflectivegs/ Published in ICRA2026

Gaussian Splatting has significantly improved the quality of novel view synthesis with explicit Gaussian representation. However, we observed that existing 3D Gaussian Splatting methods (3DGS) often suffer from surface collapse issues on reflective regions, and thus produce inferior geometry and low-quality specular. In this work, we propose a physically-based deferred rendering framework, named Reflection-aware Gaussian Splatting (RGS), that can accurately model specular regions and improve novel view synthesis performance. Specifically, we found that a powerful 3D foundation model can provide a strong 3D geometric prior to foster correct geometric modeling. Based on this, we propose a cross-view shape consistency regularization to regularize the geometry surface with the large model prior and cross-view constraints. In this manner, our RGS can produce smoother geometric surfaces on reflective regions while reducing geometric hollows. To further improve rendering results on reflective regions, we present a reflection-aware densification strategy that is designed to capture specular variations across various views. With this strategy, our RGS is able to render novel views of objects in higher quality. Extensive experiments demonstrate our method consistently renders high-quality reflective objects, achieving state-of-the-art performance.

0.49

Prior-Driven Enhancements in 3D Gaussian Splatting: Normals and Depths Regularization

cs.CV ·2026-09-29 ·Gyeonggwan Lee, Seunghwan Hong, Junghun Suh
publishedcode/data similarity 0.68
Abstract · 7 pages, 2 figures, 1 table. Oral presentation at ISPRS Geospatial Week 2025 (Dubai). Project page: https://gandanlee.github.io/pdigs/ Code:…

3D Gaussian Splatting (3DGS) is a state-of-the-art technique for 3D scene rendering, offering high efficiency and excellent visual quality. However, because 3DGS relies on an initial sparse point set from Structure-from-Motion (SfM) and view-dependent properties, it can suffer from geometric inaccuracies and visual artifacts, particularly in complex scenes. To address these challenges, we propose an improved 3DGS approach that regularizes the optimization process by integrating geometric priors, including surface normals and dense depth information. Surface normal regularization improves geometric consistency by aligning Gaussian covariance with local surface structures, while dense depth priors combined with an initial points from SfM enhance per-pixel depth estimation, increasing accuracy and reducing ambiguities. These enhancements enable robust handling of diverse and complex real-world scenarios, minimizing visual distortions and improving reconstruction quality across various environments. To validate our method, we evaluate it on challenging datasets, including street-view scenes and highly reflective environments, while testing it across multiple SfM pipelines. Our results demonstrate compatibility across diverse environments and highlight the robustness of our approach. Experimental findings further show that our method enhances geometric accuracy and visual quality, establishing a reliable solution for real-time 3D scene rendering in complex environments.

0.60

DepthGS: Depth-Guided Gaussian Splatting with Adaptive Regularization for High-Quality Surface Reconstruction

cs.CV ·2026-11-10 ·Xiao Ren, Yu Liu, Ning An, Jian Cheng, Xin Qiao +2 more
top venue similarity 0.67
Abstract · To appear in IEEE Trans. on Pattern Analysis and Machine Intelligence

Recently, 3D Gaussian Splatting (3DGS) has emerged as an efficient representation for novel view synthesis, offering fast differentiable rendering and high visual fidelity, and has increasingly been extended to surface reconstruction. However, the relationship between depth information and reconstruction error remains insufficiently explored, limiting the principled design of geometric optimization strategies. To fill the above gap, we propose DepthGS, a depth-guided Gaussian splatting framework. We derive theoretical relations between depth discrepancies and reconstruction error under single-view and multi-view settings, and rigorously establish corresponding upper bounds on reconstruction error. The above analysis informs the design of adaptive regularization strategies in both single-view and multi-view optimization. More specifically, for single-view optimization, we propose a depth-difference-guided adaptive normal regularization strategy that modulates the normal constraint strength using a geometric reliability weight computed from local depth differences. For multi-view optimization, we introduce a cross-view depth consistency regularization strategy that promotes consistency between neighboring-view depth maps and the corresponding depth predictions obtained by transforming the current view's depth predictions into those neighboring views. Extensive experiments on DTU, Mip-NeRF360, and Tanks and Temples demonstrate that DepthGS achieves competitive performance in both surface reconstruction and novel view synthesis.

0.20

GS-PI: An Optimization-Decoupled Appearance Decomposition Approach for Generating PBR Gaussian Assets

cs.CV cs.GR ·2026-09-17 ·Jieting Xu, Rengan Xie, Zijian Huang, Zehui Jin, Rui Wang +1 more
similarity 0.67
Abstract

Gaussian Splatting (GS) excels at novel-view synthesis but encodes baked-in radiance, tightly entangling illumination with geometry and preventing seamless integration into physically based rendering (PBR) pipelines. Existing inverse-rendering methods attempt to disentangle materials via joint optimization, but often suffer from competing objectives that cause severe ambiguities and residual lighting artifacts. To overcome this, we present GS-PI, a novel optimization-decoupled framework that casts PBR material generation as a geometry-conditioned diffusion process on 3D point clouds. By operating directly in the 3D domain, our method inherently guarantees multi-view consistency, sidestepping the severe pixel correspondence issues that challenge 2D diffusion approaches. We introduce a multi-scale cross-view conditioning mechanism that integrates three complementary components: a global semantic prior, source-anchored photometric cues, and an absolute spatial learned view-direction conditioning signal. This design efficiently compresses complex multi-view evidence, mitigating cross-view projection misalignment and successfully preventing specular highlights from baking into intrinsic colors. By extracting a point cloud from a pre-trained Gaussian model, predicting PBR attributes via conditional diffusion, and distilling them back through differentiable rasterisation, we yield a fully relightable PBR-GS asset. GS-PI outperforms recent inverse-rendering baselines while replacing per-scene joint illumination/BRDF optimization with a learned diffusion pass followed by a short target-driven distillation, without requiring proxy meshes.

0.16

RF3DGS: Reflection-Free 3D Gaussian Splatting with Self-Priors

cs.CV ·2026-11-10 ·Qiang Wen, Guotao Meng, Junhong Ruan, Hongyu Liu, Chenyang Lei +1 more
benchmark similarity 0.66
Abstract · 10 pages, 7 figures, 5 tables

3D reflection removal is crucial in applications demanding high-fidelity visualization, such as museum exhibitions. In this work, we propose Reflection-Free 3D Gaussian Splatting (RF3DGS), a novel method for superior reflection removal. RF3DGS exclusively leverages a widely-adopted photometric prior for reflection removal: that the minimum pixel intensity across multi-view images corresponding to the same 3D point strongly correlates with reflection-free information. However, generalizing this principle to a 3D Gaussian Splatting within a multi-view context is non-trivial. To address this, RF3DGS first optimizes a vanilla 3DGS model using a geometric prior to estimate a coarse, reflection-free depth map for each view. Leveraging these depth maps and photometric prior, a 3D warping process aggregates reflection-free information from auxiliary views to construct a clean transmission pseudo-label for a given reference view. This pseudo-label provides a robust self-supervised signal for optimization. We further introduce an Adaptive Twin Rendering (ATR) loss to synergistically utilize this pseudo-label while preserving high-frequency details from the original, reflection-degraded images. By adeptly fusing these internal 3D self-priors with the ATR loss, RF3DGS demonstrates state-of-the-art reflection removal performance across both synthetic and real-world scenarios. Furthermore, we establish the first 3D reflection removal benchmark, based on the Unity rendering engine, for rigorous quantitative evaluation.

0.11

CoMVS-GS: Collaborative Multi-View Stereo and 3D Gaussian Splatting for Surface Reconstruction

cs.CV ·2026-08-19 ·Shihan Chen, Junjing Zhang, Qingsong Yan, Haibing Liu, Haofan Ren +1 more
similarity 0.65
Abstract

3D Gaussian Splatting enables efficient novel view synthesis, but accurate mesh reconstruction remains difficult in weakly observed and occluded regions, where Gaussian primitives may grow into unstable or geometrically inconsistent structures. We propose CoMVS-GS, a general surface reconstruction framework that combines Multi-View Stereo with Gaussian splatting. CoMVS-GS initializes Gaussian primitives from dense multi-view stereo points with pre-flattened scales and normal-aligned orientations, providing stronger geometric priors than sparse structure-from-motion initialization and reducing ambiguity during early optimization. It further introduces PatchMatch-3DGS Mutual Supervision, where Gaussian-rendered depths and normals initialize PatchMatch refinement, and refined PatchMatch depths supervise Gaussian optimization to improve weakly constrained geometry. For surface extraction, CoMVS-GS replaces truncated signed distance field voxel fusion with a Delaunay graph-cut meshing pipeline, reducing sensitivity to voxel resolution while preserving visibility-consistent surface evidence. Experiments on DTU, GauU-Scene V2, and MatrixCity show that CoMVS-GS remains competitive on object-level reconstruction and improves geometric accuracy and mesh compactness in outdoor scenes while maintaining high rendering quality.

0.18

VisibilitySplat: Ray-Traced Occlusion for Relighting with 3D Gaussian Splatting

cs.CV cs.GR ·2026-10-14 ·Sven Kluge, Oliver Staadt
published similarity 0.65
Abstract · 10 pages, 5 figures, 3 tables. Published at WSCG 2026

We address inverse rendering with 3D Gaussian Splatting (3DGS) by introducing explicit visibility modeling for relighting as well as material and light decomposition. Our approach augments the standard rasterized 3DGS pipeline with a sparse visibility oracle that estimates transmittance-weighted occlusion for Gaussian primitives from sampled lighting directions. This oracle is implemented using a point-based ray tracer accelerated by a bounding volume hierarchy (BVH) and queried sparsely within the inverse-rendering objectives, while the original 3DGS loop is retained for training efficiency, interactive visualization, and tooling compatibility. Shading follows a physically based rendering (PBR) formulation with a principled microfacet bidirectional reflectance distribution function (BRDF) and low-resolution high-dynamic-range (HDR) environment maps. We evaluate our method on the TensoIR synthetic dataset against baselines based on neural radiance fields (NeRFs), tensor representations, and 3DGS. The results show competitive performance and improvements over several earlier baselines for novel-view synthesis (NVS), albedo reconstruction, and relighting. Ablations indicate that explicit visibility modeling is an important contributor to relighting and material-illumination disentanglement, while pure PBR supervision can favor appearance fitting in NVS. Overall, the findings suggest that sparse, point-based visibility queries effectively complement rasterized splatting for inverse rendering while preserving the practical advantages of the 3DGS ecosystem.

0.21

Fast and Compact 3D Gaussian Splatting with Polarized Opacity Prior

cs.CV ·2026-08-23 ·Zi-Ming Wang, Kai-Wen Duan, Kowei Huang, Akihiro Sugimoto, Shang-Hong Lai
top venue similarity 0.65
Abstract

3D Gaussian Splatting (3DGS) achieves state-of-the-art rendering quality at real-time speeds but suffers from "model bloat" - a large number of redundant, low-opacity Gaussians that inflate memory usage and training costs. This inefficiency stems from the standard "densify-then-prune" paradigm, which expands the model aggressively before relying on pruning to achieve compactness. To mitigate this problem, we present an efficient training framework that builds an intrinsically compact representation, replacing the conventional densify-then-prune cycle. Our method leverages a synergistic design: an L2 reconstruction loss to provide error-proportional gradients that stabilize optimization, and a novel Polarized Opacity Prior (POP) to actively manage the Gaussian population. POP steers informative primitives toward full opacity and uninformative ones toward transparency, enabling natural pruning and accelerating rendering through Early Ray Termination. Experiments on three public datasets demonstrate that our approach consistently achieves accelerated 3DGS training with significantly fewer Gaussians while maintaining comparable visual reconstruction quality. These results show that the proposed framework provides a simple and effective path toward fast and inherently compact 3DGS training.

0.39