CS Paper Radar

PLS-GS: Probabilistic Lidar Scaffolds for Compact, Surface-Aligned Gaussian Splatting

Krishnan Harikumar, Alejandro Fontan, Thierry Peynot, Emili Hernández, Niko Sünderhauf

cs.CV cs.GRcs.RO ·submitted 2026-11-07 12:33 UTC · v1
publishedcode/data

Abstract

While 3D Gaussian Splatting (3DGS) is typically optimized from images only, many robotics and mapping applications provide both camera and high-definition LiDAR data, combining rich visual appearance with accurate geometric structure. We introduce PLS-GS, a probabilistic LiDAR scaffold for Gaussian Splatting that exploits this complementary sensing setting to construct a compact 3DGS representation aligned to the measured surface. PLS-GS fits a Hierarchical Gaussian Mixture Model jointly over position and color, yielding a continuous and adaptive scaffold that eliminates the need for discrete scene partitioning such as voxel grids or octrees. The fitted mixture then guides the renderable 3DGS Gaussians: each rendering Gaussian is associated with a GMM component and constrained in the local surface frame induced by that component's covariance. A Mahalanobis support loss bounds the deviation of the rendering Gaussians from the corresponding LiDAR-derived surface. Across five large outdoor scenes, PLS-GS places primitives markedly closer to the LiDAR measurements than both image- and LiDAR-initialized baselines, while employing substantially fewer primitives, yielding a considerably more compact model and faster rendering. At matched capacity, PLS-GS places primitives closer to the LiDAR measurements, with comparable rendering quality. Code is available at https://github.com/k-harikumar/PLS-GS.

Comment
Accepted to WACV 2027. Main paper and supplementary material. Code: https://github.com/k-harikumar/PLS-GS

Closest papers

Nearest neighbours by meaning across the whole index.

Prior-Driven Enhancements in 3D Gaussian Splatting: Normals and Depths Regularization

cs.CV ·2026-09-29 ·Gyeonggwan Lee, Seunghwan Hong, Junghun Suh
publishedcode/data similarity 0.71
Abstract · 7 pages, 2 figures, 1 table. Oral presentation at ISPRS Geospatial Week 2025 (Dubai). Project page: https://gandanlee.github.io/pdigs/ Code:…

3D Gaussian Splatting (3DGS) is a state-of-the-art technique for 3D scene rendering, offering high efficiency and excellent visual quality. However, because 3DGS relies on an initial sparse point set from Structure-from-Motion (SfM) and view-dependent properties, it can suffer from geometric inaccuracies and visual artifacts, particularly in complex scenes. To address these challenges, we propose an improved 3DGS approach that regularizes the optimization process by integrating geometric priors, including surface normals and dense depth information. Surface normal regularization improves geometric consistency by aligning Gaussian covariance with local surface structures, while dense depth priors combined with an initial points from SfM enhance per-pixel depth estimation, increasing accuracy and reducing ambiguities. These enhancements enable robust handling of diverse and complex real-world scenarios, minimizing visual distortions and improving reconstruction quality across various environments. To validate our method, we evaluate it on challenging datasets, including street-view scenes and highly reflective environments, while testing it across multiple SfM pipelines. Our results demonstrate compatibility across diverse environments and highlight the robustness of our approach. Experimental findings further show that our method enhances geometric accuracy and visual quality, establishing a reliable solution for real-time 3D scene rendering in complex environments.

0.60

GEMOR-GS: Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM

cs.RO cs.CV ·2026-11-10 ·Yuchen Yang, Ming Ding, Xinyu Wu, Hesheng Wang
similarity 0.71
Abstract

Photorealistic and metrically consistent world representations are a primary requirement for LiDAR--inertial--visual SLAM systems that serve robots over continuous operation. 3D Gaussian splatting makes such representations attainable by supplying an explicit, renderable, and queryable scene model. We present GEMOR-GS (Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM) to make the Gaussian map geometrically accurate, globally refined, and re-enterable, providing a better appearance for robot perception and decision-making. To improve the 3DGS map, the LiDAR--camera extrinsic is first estimated offline by direct-method alignment over dedicated calibration segments and reused by all following online and offline processes. Under the calibrated geometry, keyframe poses and Gaussian parameters are refined alternately under a gated differentiable-rendering and LiDAR--projection objective. The final global reconstruction is then rebuilt from the refined keyframe schema with all online constraints lifted. For the robot SLAM lifecycle, the method recovers the pose from the 3DGS map after tracking loss through an XFeat bypass map, RANSAC-PnP coarse localization, and Gaussian RGB-D warp refinement. Experiments on one self-collected and five public sequences quantify each element: the offline reconstruction wins all paired keyframes against the online map by 14.3--19.9 dB, improves PSNR by approximately 9 dB over Gaussian-LIC2, and achieves 86--100% held-out relocalization success tied to extrinsic quality. The results show that GEMOR-GS improves the geometric accuracy, appearance fidelity, and re-enterability of the 3DGS map, serving as a dependable robot world model for SLAM and downstream tasks.

0.12

STARS-GS: Structure-Aware Regularized Gaussian Splatting for Large-Scale Aerial Surface Reconstruction

cs.CV ·2026-09-03 ·Bocheng Li, Wenjuan Zhang, Jie Pan. Dongxu Han, Xuesong Ma, Yiling Yao +1 more
similarity 0.70
Abstract

Large-scale 3D surface reconstruction from aerial imagery is fundamental to geospatial mapping and urban modeling. Recent advances in 3D Gaussian Splatting (3DGS) have demonstrated considerable potential for this task. However, existing methods still face three major challenges in large and complex scenes: scene partitioning may split continuous scene elements across independently optimized sub-regions; geometric constraints mainly focus on the attributes of individual Gaussians while overlooking their local organization; and uniform regularization struggles to accommodate heterogeneous geometric structures. To address these issues, we propose STARS-GS, a structure-aware 3DGS framework for large-scale surface reconstruction. First, we introduce a structure-aware scene partitioning strategy that better preserves continuous scene structures during partitioning and reduces cross-region geometric inconsistencies and stitching artifacts through boundary refinement. Second, we develop neighborhood-aware Gaussian organization that extends geometric constraints from individual primitives to their neighborhood organization, encouraging Gaussians to better conform to local surface geometry. Third, we introduce adaptive surface regularization that adjusts the regularization strength according to local geometric characteristics, promoting geometric consistency in structured regions while preserving plausible variations in unstructured regions. Extensive experiments on large-scale aerial photogrammetry benchmarks demonstrate that STARS-GS consistently outperforms the evaluated Gaussian-based methods in surface reconstruction. It increases the average F1-score from 0.640 for the second-best method to 0.698, corresponding to a relative improvement of approximately 9.1\%, demonstrating effective improvements in geometric accuracy and surface completeness.

0.18

Federated 3D Gaussian Splatting for Large-Scale Scene Reconstruction at Wireless Edge

cs.CV cs.DC ·2026-09-26 ·Guanlin Wu, Chao Hu, Pu Chen, Juyong Zhang, Han Hu +2 more
published similarity 0.69
Abstract · 16 pages, 10 figures, 6 tables. Accepted for publication

Three-dimensional (3D) Gaussian splatting (3D-GS) has emerged as a promising technique for large-scale scene reconstruction due to its high rendering efficiency and fidelity. However, the training of large-scale 3D-GS models at wireless edge faces various technical challenges including the limited communication, computation, and graphics processing unit (GPU) memory resources at edge devices, the structural inconsistency issue across local models hindering their effective aggregation, as well as privacy leakage risks associated with raw visual content and camera parameters. To address these challenges, this paper proposes a novel resource-efficient federated learning framework for efficiently training 3D-GS models of large scenes under severe resource constraints. First, we propose an on-device model lightweighting mechanism that adaptively selects and prunes Gaussian points to balance the rendering quality and training efficiency. In this mechanism, we quantitatively evaluate the importance of different Gaussian points at each device to facilitate the pruning, and use a novel importance-to-latency ratio criterion to determine the number of pruned Gaussian points under GPU memory and computation/communication latency constraints. Furthermore, we develop a 3D-GS model recovery mechanism that restores structural consistency across local 3D-GS models without accessing private camera parameters, enabling their effective aggregation towards a global model. Finally, extensive experiments show that our approach significantly accelerates convergence, maintains high rendering quality, and reduces training latency compared to state-of-the-art federated 3D-GS baselines.

0.27

OctreeSplat: Hierarchical Octree-Guided Feed-Forward Gaussian Splatting

cs.CV ·2026-11-02 ·Yibin Zhao, Yihan Pan, Wenli Yang, Jun Nan, Jianjun Yi
similarity 0.69
Abstract

3D Gaussian Splatting (3DGS) has shown considerable potential for novel view synthesis (NVS) and 3D reconstruction. Feed-forward methods avoid costly per-scene optimization, but fixed image or spatial resolutions limit their ability to allocate primitives according to local complexity. We present OctreeSplat, a hierarchical octree-guided feed-forward Gaussian splatting. OctreeSplat extracts multi-view features and geometric priors from a frozen visual foundation model (VFM), constructs a hierarchical octree, and predicts densification scores. The resulting representation allocates Gaussian primitives at spatially varying densities according to local complexity. Stochastic solids volume rendering improves depth rendering, strengthens geometric supervision, and supports surface reconstruction. When camera parameters are available, an optional test-time optimization (TTO) module improves agreement between predicted and ground-truth parameters. Training updates only 76 million additional parameters and requires 35 GPU-hours. Experiments on Replica, TUM, Tanks and Temples, and DTU demonstrate competitive RGB view synthesis, depth synthesis, and surface reconstruction. OctreeSplat reduces the number of Gaussian primitives while maintaining high reconstruction quality.

0.10

CoMVS-GS: Collaborative Multi-View Stereo and 3D Gaussian Splatting for Surface Reconstruction

cs.CV ·2026-08-19 ·Shihan Chen, Junjing Zhang, Qingsong Yan, Haibing Liu, Haofan Ren +1 more
similarity 0.68
Abstract

3D Gaussian Splatting enables efficient novel view synthesis, but accurate mesh reconstruction remains difficult in weakly observed and occluded regions, where Gaussian primitives may grow into unstable or geometrically inconsistent structures. We propose CoMVS-GS, a general surface reconstruction framework that combines Multi-View Stereo with Gaussian splatting. CoMVS-GS initializes Gaussian primitives from dense multi-view stereo points with pre-flattened scales and normal-aligned orientations, providing stronger geometric priors than sparse structure-from-motion initialization and reducing ambiguity during early optimization. It further introduces PatchMatch-3DGS Mutual Supervision, where Gaussian-rendered depths and normals initialize PatchMatch refinement, and refined PatchMatch depths supervise Gaussian optimization to improve weakly constrained geometry. For surface extraction, CoMVS-GS replaces truncated signed distance field voxel fusion with a Delaunay graph-cut meshing pipeline, reducing sensitivity to voxel resolution while preserving visibility-consistent surface evidence. Experiments on DTU, GauU-Scene V2, and MatrixCity show that CoMVS-GS remains competitive on object-level reconstruction and improves geometric accuracy and mesh compactness in outdoor scenes while maintaining high rendering quality.

0.18

CompactSplat: Spatially Adaptive Gaussian Distribution for Feedforward Scene Reconstruction

cs.CV ·2026-10-09 ·Bing He, Jingnan Gao, Yunuo Chen, Zhengxue Cheng, Rong Xie +2 more
similarity 0.68
Abstract · NeuRIPS2026, Generalizable reconstruction, 3DGS, 2DGS

Reconstructing 3D scenes from sparse views without per-scene optimization remains highly challenging, especially for recovering accurate geometry and fine textures. While recent feedforward approaches leverage generalizable 3D Gaussian Splatting (3DGS) for scene generation, they typically assign one or multiple Gaussians to each pixel. Such uniform allocation not only produces highly redundant representations by wasting primitives in homogeneous areas, but also fails to exploit the inherent geometric priors of planar surfaces, often resulting in sub-optimal structural modeling. To address these limitations, we present CompactSplat, a novel feedforward framework that enables a content-aware allocation of 3D Gaussians. By integrating texture-guided spatial partitioning with hierarchical sampling, CompactSplat adaptively distributes primitives - concentrating dense Gaussians in complex regions while tiling flat areas with expanded, scale-modulated primitives. Moreover, our framework inherently supports dynamic sparsity control at inference time, enabling seamless trade-offs between rendering fidelity and memory footprint without requiring network retraining. Extensive experiments on RealEstate10K, DL3DV, and ScanNet demonstrate that CompactSplat consistently outperforms prior methods on both standard metrics and high-resolution rendering consistency, achieving high-fidelity reconstructions with significantly fewer primitives.

0.26

URL-Sim: Unified and Regulated LiDAR Simulation for High-Fidelity Reconstruction of Dynamic Driving Scenes

cs.CV ·2026-11-06 ·Kefei Qian, Xipeng Feng, Jie Li, Long Cao, Yuhan Chen +2 more
similarity 0.68
Abstract

Reconstructing high-fidelity LiDAR simulation scenes from real-world driving logs is essential for cost-effective safety validation of autonomous driving systems. While simulators based on Neural Radiance Fields (NeRF) achieve realistic scene reconstruction, their large-scale adoption is limited by slow rendering speeds. Recent 3D Gaussian splatting (3DGS) approaches have improved rendering efficiency through explicit primitive representation and differentiable rasterization. However, existing 3DGS-based methods remain largely restricted to rigid vehicles and produce redundant primitives through unconstrained densification. To address these limitations, we propose URL-Sim, a unified and regulated dynamic LiDAR simulation framework. URL-Sim constructs a dynamic Gaussian scene graph that decouples the modeling of traffic participants, including vehicles, pedestrians, and cyclists, enabling accurate reconstruction of heterogeneous dynamic objects within a single framework. It further introduces a regulated Gaussian densification strategy that ranks primitives with multi-dimensional importance scores and allocates Gaussians to the most critical regions while keeping the total primitive count bounded. Experiments on the Waymo and KITTI-360 datasets demonstrate that URL-Sim achieves higher quantitative accuracy and visual quality than existing baselines under comparable primitive budgets, and accurately recovers the geometry and poses of diverse dynamic traffic participants.

0.25