CS Paper Radar

Ground Reaction Force-Aware Model Predictive Control for Underactuated Upright Physical Assistance

Darren Biskup, Jeonghan Yu, Zibo Yu, Sunil K. Agrawal

cs.RO eess.SY ·submitted 2026-11-09 20:29 UTC · v1
top venue

Abstract

Many rehabilitation robots execute prescribed motions using reactive tracking controllers that do not explicitly incorporate the user's instantaneous human-ground interaction. This paper presents Ground Reaction Force-Aware Model Predictive Control (GRF-MPC), a framework for upright physical assistance. By integrating live GRF and center of pressure (CoP) measurements directly into a human centroidal dynamics model, GRF-MPC formulates a real-time quadratic program (QP) that optimizes assistive forces and moments over a receding horizon. We deployed GRF-MPC on the Robotic Upright Stand Trainer (RobUST) in an underactuated 4-cable configuration and evaluated it against a fully actuated 8-cable Cartesian impedance baseline in nearly 300 trials across six healthy participants. Across tasks spanning impulsive perturbations, lunge trajectories, and voluntary limits of stability, GRF-MPC reduced peak planar center-of-mass (CoM) error by 19.6% during perturbations, lowered trajectory tracking error by 24.1%, required 28.7% less net mechanical work, and permitted a 45.9% greater normalized voluntary excursion area. The underlying QP solves in under 1 ms, comfortably enabling 100 Hz replanning and demonstrating that incorporating live human-ground interaction into predictive control yields stronger, more transparent physical assistance with half the actuators.

Comment
Accepted for publication in IEEE Robotics and Automation Letters (RA-L), October 2026. 8 pages, 5 figures
DOI
10.1109/LRA.2026.3752000

Closest papers

Nearest neighbours by meaning across the whole index.

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.68
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Adaptive Whole-Body MPC with Optimal Posture Planning for Humanoid Robots under Unknown Payloads

cs.RO ·2026-10-09 ·Manh Cuong Nguyen, Duc Cuong Vu, Viet Anh Vu, Duc Tuan Pham, Toan Nguyen +3 more
publishedhot direction similarity 0.67
Abstract · Accepted for presentation at the 25th IEEE RAS International Conference on Humanoid Robots (Humanoids2026)

Humanoid robots performing lifting and material-handling tasks must maintain balance despite unknown and varying payloads. However, payload uncertainty significantly affects whole-body dynamics and may destabilize conventional controllers. We propose an adaptive whole-body control architecture that integrates three components: (i) a centroidal model predictive controller (MPC) that generates dynamically feasible reference motions, (ii) an adaptive fuzzy balance controller that compensates for payload-induced model mismatch by generating corrective torques distributed across the supporting-leg joints, and (iii) a waypoint-based optimal posture planner built on a triple-integrator model that produces smooth sit-to-stand and stand-to-sit trajectories satisfying center-of-mass (CoM) stability constraints, joint limits, and whole-body feasibility requirements. Together, these components enable stable lowering, grasping, lifting, carrying, and placing behaviors under significant payload uncertainty. Extensive simulation and hardware experiments demonstrate that the proposed framework improves balance robustness and reduces tracking degradation during posture transitions and lifting tasks compared to non-adaptive baselines.

0.43

CompliantWBC: Whole-Body Compliance for Heavy Humanoids via Force Latent Estimation and Residual Impedance Targets

cs.RO ·2026-09-27 ·Tan-Dzung Do, Cuc T. Trinh, Tuan Dat Phuong, Chien Le, Thanh Ly +2 more
similarity 0.64
Abstract · Project website: https://dotandung.github.io/compliantwbc/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

0.45

Leaning Over to Reach Far-Away Objects

cs.RO ·2026-11-14 ·Allen Devaraj, William Xie, Nikolaus Correll
code/data similarity 0.63
Abstract · 8 pages, 9 figures, 1 table. Under review at ICRA 2027. Videos and code at https://h12leaner.github.io/

We study supported reaching to extend a humanoid robot's workspace by bracing against the environment for stabilization using a straightforward yet capable whole-body model predictive control (MPC) approach, exclusively with local sensing and fiducial markers. While typical solutions for whole body humanoid control aim at avoiding or accommodating contact, contact is explicitly required to reach objects placed on surfaces far out of normal reach. We employ sampling-based MPC for whole-body leaning, bracing, reaching, and recovery on a Unitree H1-2 humanoid. The controller runs in real-time at 34 Hz on a laptop, transfers sim-to-real, extends reach by about 50 cm beyond the unbraced standing workspace, and sustains the loaded posture for over four minutes, before pose estimation drifts. The controller reaches the commanded target in 89% of trials and completes the full reach-and-recovery cycle in 81%, across 54 trials spanning six targets and three table heights. We further characterize why such a small real-time sampling budget is sufficient, finding that temporal persistence of sampled actions and exploration scale strongly govern success, while CEM provides the widest operating region over planning rate and model mismatch. These results establish a real-world baseline for online, contact-rich humanoid manipulation. Code, videos, and full hardware details are available at https://h12leaner.github.io/

0.28

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.63
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC

cs.RO eess.SY ·2026-11-17 ·Pranav Gupta, Deepan Muthirayan, Ravi Banavar
similarity 0.63
Abstract · This manuscript has been submitted to the 9th Annual Learning for Dynamics & Control Conference, taking place in Stockholm, Sweden, in June …

Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.

0.12

CRISP: Constraint-Resolved Interactions between Subsystems for Predictive Whole-Body Cooperation

cs.RO ·2026-11-05 ·Dario Valenzuela, Jeeseop Kim
similarity 0.62
Abstract · 7 pages, 8 figures

This paper presents a layered control framework that recasts high-dimensional system dynamics as a composition of dynamically interconnected subsystems, with dynamic dual-arm manipulation on the humanoid serving as a representative application. The humanoid is decomposed into a single rigid body (SRB) representing the torso and floating-base dynamic models representing the articulated arms and lower-body. The rigid connections between arm and torso and the closed kinematic chain formed between the end-effectors during cooperative manipulation are represented as holonomic constraints. The corresponding Lagrange multipliers parametrize the interaction wrenches transmitted at the shoulders and between the end-effectors. The high-level nonlinear model predictive control (NMPC) jointly optimizes the subsystem state trajectories, arm torques, ground reaction forces (GRFs), and interaction wrenches, enabling online wrench design and optimization while preserving the dynamic coupling among the independently modeled subsystems. The optimized arm torques are applied directly for cooperative dual-arm manipulation, whereas the prescribed GRFs are mapped to lower-body joint torque for whole-body coordination. We validate the proposed framework through numerical simulations and hardware experiments on a G1 humanoid robot. The results demonstrate optimal interaction wrenches consistent with simulated contact measurement, cooperative dual-arm trajectory tracking, and stable whole-body coordination while executing the NMPC in online manner.

0.25

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.62
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18