CS Paper Radar

Reconstructing Boundary Layer Wind Profiles with Machine Learning: A Comparative Study on IGRA Radiosonde Data

Fedor Buzaev, Dmitry Efremenko, Daria Pugacheva, Fedor Ratnikov, Egor Bugaev, Vladimir Gordin, Denis Derkach

cs.LG cs.NEphysics.ao-ph ·submitted 2026-11-09 23:34 UTC · v1
publishedbenchmark

Abstract

Wind profiles in the atmospheric boundary layer (ABL) drive short-range forecasting and wind-energy siting, yet sparse radiosonde coverage forces practitioners to interpolate them from a handful of physical predictors. We benchmark modern tabular learners against analytical parameterizations on 158,097 IGRA soundings. CatBoost, TabM, and FT-Transformer reduce RMSE to 1.3-1.6 m/s, against approximately 3 m/s for power-law and Monin-Obukhov fits; once the predictor set is fixed the three architectures differ by less than 0.05 m/s, so accuracy is driven by predictors rather than architecture. A cohort analysis of within-bin profile dispersion places an empirical floor of approximately 1.77 m/s on any point-wise predictor that uses standard radiosonde features, consistent with prior eddy-viscosity inversions. A one-dimensional Fourier Neural Operator applied as a post-hoc corrector to frozen tabular predictions reduces near-surface RMSE on U.S. stations from 1.5 to 1.2 m/s, while leaving upper-layer error unchanged. Further gains should come from new predictors rather than larger models.

Comment
10 pages, 8 figures. Accepted at the 2nd Workshop on AI-Ready Data for Science Discovery (ADSD), IEEE ICDM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Aries: A Proprietary Medium-Range Weather Prediction Model for the Energy Industry

cs.LG physics.ao-ph ·2026-09-09 ·Lukas Hedegaard Morsing, Arian Bakhtiarnia, Jonas Lynge Olesen, Tómas Bragi Björnsson Leth, Christian Gøbel Bach
similarity 0.67
Abstract

Medium-range weather forecasting underpins operational and planning decisions across the energy industry. Developing competitive weather models was once the domain of national meteorological centers, but recent advances in machine-learned weather prediction (MLWP) have opened the field to industry. We present Aries, a SwinTransformer-based MLWP model developed at InCommodities. Aries is trained on ERA5 reanalysis data at 0.25\textdegree{} resolution, predicting 74 prognostic and 11 diagnostic atmospheric variables. We evaluate the model on 2025 ECMWF Analysis initializations, ensuring a recent and strictly out-of-sample test period for all models compared. On 10-metre wind speed, Aries outperforms both ECMWF HRES and AIFS in terms of RMSE for lead times up to four days, while on 2-metre temperature it achieves RMSE on par with AIFS operational. These results demonstrate that proprietary development of competitive weather models is technically viable, supporting a broader set of forecasts available for operational and planning applications in the energy industry.

0.10

Short-Term Forecasting of Heterogeneous Wind Power Fleets: Global Temporal Fusion Transformer Leveraging Static Covariates

cs.LG ·2026-11-04 ·Viktor Walter, Andreas Wagner
similarity 0.66
Abstract · 18th International Green Energy Conference (IGEC-XVIII) & the 7th International Conference on Energy and AI (ICEAI-VII)

Accurate short-term wind power forecasting is critical for grid stability and electricity trading. While transformer-based deep learning is state of the art, industry practice relies mostly on local models trained for individual assets. This study investigates whether a global temporal fusion transformer (TFT), trained jointly on a heterogeneous portfolio of wind farms across Germany, outperforms site-specific local models in 48-hour-ahead forecasting. Using numerical weather prediction (NWP) data from the regional ICON-D2 and the global ECMWF HRES models, we compare the global TFT against local models and a linear regression baseline. The global model leverages static covariates, such as farm age, altitude above sea level, hub height, rotor diameter and power curve parameters, to learn shared representations across sites. We evaluate on 100 synthetic wind farm profiles and a real portfolio of 11 German wind farms, across two seasonal test periods with intermediate retraining. The global TFT outperforms the local models for 87% of the synthetic and 77% of the real wind farms and clearly surpasses the linear baseline. Wilcoxon signed-rank tests confirm that these gains are significant across both seasons and datasets. Crucially, this superiority depends on static covariates: without asset-specific context, the global model fails to generalize. The TFT's variable selection network (VSN) reveals the learned feature selection. Altitude emerges as a relevant static discriminator on both datasets, while hub height is decisive on the real portfolio. For dynamic inputs, the encoder prioritizes historical power, whereas the decoder combines upper-level wind speeds from both NWP models, consistent with averaging out model-specific errors. These findings support a shift from single-site to scalable multi-site forecasting, reducing operational complexity while improving accuracy in large portfolios.

0.20

A Station-Based Evaluation of Machine Learning-based Weather Forecasting Models in Northern Norway

cs.LG physics.ao-ph ·2026-08-25 ·Siyan Chen, Lars Uebbing, Eirik Mikal Samuelsen, Georgios Leontidis, Arnt-Børre Salberg +3 more
similarity 0.66
Abstract · 19 pages, 10 figures, 8 tables

Recent machine learning weather prediction (MLWP) models have demonstrated remarkable forecasting skill on global reanalysis-based benchmarks. However, their performance remains unclear in challenging environments such as Northern Norway, where narrow fjords and rapidly changing weather result in highly variable local wind conditions. In this case study, we evaluate FourCastNet3 (FCN3), GraphCast, and ECMWF High Resolution Forecast (HRES) for wind speed forecasting using multi-year station observations from Northern Norway, focusing on their relative performance, generalization beyond the training period, and performance under high-wind conditions. Our results show that HRES slightly outperforms FCN3 and GraphCast, with an overall RMSE of 2.89 $\mathrm{m\,s^{-1}}$, compared to 2.96 $\mathrm{m\,s^{-1}}$ for FCN3 and 2.94 $\mathrm{m\,s^{-1}}$ for GraphCast. Notably, the MLWP models maintain comparable performance beyond their respective training periods, with no clear evidence of noticeable degradation. FCN3 performs best under high-wind conditions, although all models substantially underestimate strong winds. Our findings suggest that MLWP has become competitive with NWP for local wind, but further refinements are still needed to capture complex terrain better.

0.34

StationPDE: Station-Oriented Surface PDE Learning for Multi-Station Multivariate Weather Forecasting

cs.LG ·2026-08-20 ·Xiao Wang, Changjian Chen, Rongwen Li, Hongwu Liu, Kun Fang +1 more
similarity 0.65
Abstract

Multi-station multivariate weather forecasting aims to forecast future weather variables at multiple weather stations from historical surface observations. Existing station forecasting models learn statistical dependencies among discrete stations, but lack explicit physical evolution. Meanwhile, PDE-based weather models provide interpretable physical dynamics, yet require continuous fields and upper-air variables unavailable in surface station data. To bridge this gap, we propose StationPDE, a station-oriented surface PDE learning model. StationPDE constructs a terrain-aware continuous surface field from discrete station observations and decomposes its physical evolution into surface wind transport and upper-air inference. Surface wind transport explicitly evolves observable weather variables, while upper-air inference uses learnable horizontal diffusion to approximate the missing influence of unavailable upper-air variables. A parallel data-driven diffusion branch captures complementary motion patterns, and an adaptive router integrates the two forecasts for station-level multivariate forecasting. Experiments on Weather2K and MeteoNet show that StationPDE consistently outperforms state-of-the-art baselines, reducing MSE by about $9.6\%$ on average compared with the strongest baseline.

0.43

Data-driven and physics-guided hindcasting of measured wave spectra

cs.LG physics.ao-ph ·2026-10-21 ·Sander Rikka
unusual similarity 0.63
Abstract

Short-range hindcasts of measured wave spectra are evaluated using a recurrent model initialized by one hourly buoy spectrum and supplied with local wind, fetch and depth. Measurements from three Baltic Sea stations are combined for training in 2017--2020, validation in 2021 and testing in 2022. ERA5 reanalysis supplies winds throughout the twelve-hour prediction interval. The comparison examines supervision of spectral variance, peak frequency and peak amplitude, followed by empirical wind-sea bounds and a local relaxation constraint. Variance and peak-frequency supervision gives the lowest spectral error within the data-driven comparison, whereas additional peak-amplitude supervision gives the lowest wave-height error. In the matched physical comparison, relaxation reduces height RMSE by 5.01\% to \PhPtwoHs{}~cm. Extending this constraint through hours 13--24, without spectral targets at those hours, reduces primary spectral RMSE by 2.31\% to \PhPthreeSpec{}~$\unitE$. Upper-bound constraints increase errors. Wind-condition comparisons show spectral gains from extended relaxation in increasing, decreasing and steady strong winds, with little change in steady weak winds. The results support modest, objective-dependent benefits from local physical guidance. Wave-height scores concern the retained frequency band, and operational forecasting and transfer to independent stations remain to be evaluated.

0.25

WPBench: A Comprehensive Benchmark for Wind Power Forecasting

cs.LG cs.AI ·2026-09-21 ·Yuhan Zhu, Jilin Hu, Xinying Cai, Yingshan Li, Li Ma +5 more
top venuebenchmark similarity 0.63
Abstract · Accepted by ICDE 2027

Accurate, reliable, and deployable wind power forecasting is critical for power system dispatch, renewable energy integration, and electricity market operations. Progress in this field hinges on the ability to empirically and comprehensively benchmark forecasting methods. Yet existing benchmarks fall short of supporting systematic evaluation in four key aspects: 1) limited coverage of wind power scenarios across turbine scale, variable composition, and spatial structure; 2) incomplete coverage of forecasting model families; 3) evaluation metrics misaligned with wind power requirements; and 4) limited structure-aware diagnostics beyond individual temporal patterns. To address these limitations, we propose WPBench, a comprehensive, fair, and extensible benchmark for wind power forecasting. WPBench integrates 26 public datasets organized by turbine scale and variable composition, spanning single-turbine, multi-turbine, univariate, and multivariate settings. Under unified processing, training, and evaluation protocols, it benchmarks 19 representative models covering traditional methods, deep temporal models, spatio-temporal models, and foundation models. Beyond point-wise errors, WPBench assesses forecast-curve fidelity and computational efficiency, and delivers structure-aware diagnostics across temporal, variable-dependency, and spatial-dependency perspectives. Together, these capabilities enable systematic model comparison across diverse wind scenarios and provide a reusable platform for future research.

0.56

Statistical versus machine learning-based spatial interpolation of post-processed ensemble weather forecasts

cs.LG stat.APstat.ML ·2026-09-07 ·Mária Lakatos
similarity 0.61
Abstract · 25 pages, 3 figures, 15 tables

Statistical post-processing improves ensemble weather forecasts, but generating calibrated predictions at locations without observations remains challenging. This study compares statistical and machine-learning-based methods for post-processing ECMWF 2-m temperature and 10-m wind speed forecasts at observed and unobserved stations in Germany. We consider EMOS-based approaches, distributional regression networks, Transformers, and graph neural networks under both limited and extended predictor settings. For temperature, we also investigate linear forecast combinations and propose an altitude-aware linear pool (ALP). The results show that post-processing improves upon the raw ensemble in most settings, but no single method performs best across all variables, station groups, and evaluation metrics. The proposed ALP provides a small but significant improvement over the standard linear pool at unobserved locations.

0.14

Varda-single-1.0: deterministic data-driven weather forecasting at 1 km resolution over Switzerland's complex topography

cs.LG physics.ao-ph ·2026-10-01 ·Alberto Pennino, Francesco Zanetta, Michele Cattaneo, Claire Merker, Radi Radev +26 more
code/data similarity 0.61
Abstract · 24 pages, 13 figures, 2 tables. Model weights: https://huggingface.co/MeteoSwiss/Varda-single-1.0

We present Varda-single-1.0, a medium-range data-driven weather prediction system built for the Alpine domain. It provides hourly deterministic regional forecasts on a mesh of 1 km resolution and global forecasts on a 31 km mesh. The system comprises two independently trained stretched-grid Graph Transformer models with encoder-processor-decoder architecture, developed in the Anemoi framework: a 6-hourly autoregressive forecaster and a temporal downscaler reconstructing hourly forecasts between the forecaster's steps. Its training curriculum includes pre-training on ERA5 reanalysis data, followed by training on a 20-year kilometre-scale regional reanalysis, and finally fine-tuning on operational kilometre-scale analyses. Verified over one year against operational analyses and surface station observations, Varda-single is competitive with or improves on MeteoSwiss' operational numerical weather prediction baselines for most headline scores and variables. It broadly matches the skill of the high-resolution 1 km ICON-CH1-EPS control at lead times up to +33 h and generally outperforms the 2 km ICON-CH2-EPS control at lead times up to +120 h. Despite competitive aggregate scores, Varda-single underestimates some local wind maxima and produces overly smooth convective precipitation fields, consistent with the smoothing associated with squared-error training. To gain insight into the model's behaviour, we investigate three case studies beyond the aggregated headline scores, and find particular weaknesses in Varda-single's representation of local winds over complex terrain. Varda-single represents an important step in the development of high-resolution ML forecasting over complex terrain, in complementing the operational regional numerical weather prediction models of MeteoSwiss with data-driven models and in providing a pretrained model for researchers and user-specific applications.

0.33