CS Paper Radar

Evaluating Tactile Encoding Strategies for Communicating 3-D Shape

MacKenzie C. Harnett, Rebecca F. Friesen

cs.HC ·submitted 2026-11-10 17:40 UTC · v1

Abstract

Two-dimensional haptic displays, such as programmable pin arrays and vibrotactile or friction-modulating touchscreens, enable tactile communication of complex shapes in a low-profile form factor. However, many shapes of interest, including CAD models, three-dimensional graphs, and map topographies, are inherently three-dimensional. This work investigates two methods for encoding 3-D information using a 2-D tactile display: (1) a single tactile height map providing coarse but quantifiable depth cues, and (2) a series of binary layers communicating sequential slices of a 3-D model, supporting more complex geometries such as overhangs and cavities. We further compare performance across two display types--a friction-modulating display and a pin array--to examine how the level of haptic abstraction affects users' ability to decode discrete 3-D information. A user study demonstrates that participants were able to effectively complete a 3-D assembly task using both strategies, achieving high accuracy across all display types. While the pin array supported faster task completion and higher-rated--though not statistically significant--user experience than the friction-modulating display for the binary-layer task, these differences did not translate to significant differences in overall usability (i.e., reassembly accuracy success). Together, these results identify design trade-offs and inform development of future surface haptic displays that support the communication and interpretation of discrete 3-D information in tactile graphics.

Closest papers

Nearest neighbours by meaning across the whole index.

An Affordable Vibrotactile Surface for Tactile Figure Recognition: Exploration Strategies of Blind and Sighted Users

cs.HC ·2026-11-17 ·Uday Nath Gunda, Arun Raman, Parthasarathy PD
hot direction similarity 0.68
Abstract

Refreshable tactile displays can make graphics accessible to blind and low-vision people, but high-resolution actuator arrays remain expensive. We study whether a low-cost vibrotactile surface can convey simple figures, and how they are read. Nine participants (four blind; five sighted, tested blindfolded then open-eyed) identified seven figures by touch, with video and timing analysis of their exploration. Blind and blindfolded-sighted readers achieved comparable accuracy, but blind participants were about three times faster, using a continuous, rhythmic "gliding" strategy-reading through motion, whereas sighted participants searched in halting, pause-heavy passes; among the sighted, more pausing accompanied errors. Recognition failures were concentrated in specific figures (a diagonal was misread even with vision), locating the bottleneck in representation rather than resolution. We contribute an empirical characterization of tactile reading strategies and design implications for low-cost refreshable tactile displays and affordable tactile representation.

0.25

Tactile Search: Enhancing Targeting in 3D Space

cs.HC ·2026-09-05 ·Amber Maimon, Iddo Yehoshua Wald, Jonas Keppel, Eunhee Chang, Yoshifumi Kitamura +3 more
top venue similarity 0.67
Abstract · Accepted to the 2026 IEEE International Symposium on Mixed and Augmented Reality (ISMAR 2026)

Visual search is crucial in daily life, from scanning for relevant information to spotting signs of danger. When sensory channels are overloaded or degraded, cognitive tasks can be supported by crossmodal information representations through vibrotactile cues. We introduce Tactile Search, an approach that uses modulation of frequency and amplitude of vibrations to the hands, for guiding attention to the location of objects in 3D space. We evaluated this approach in a competitive VR game where participants searched for targets using both vision and touch. Across two studies -- an in-the-wild demonstration (n=55) and a controlled laboratory experiment (n=28) -- we found that vibrotactile feedback significantly improved performance and increased user confidence. In the combined haptic condition, performance did not differ across target heights. We further analyzed participants' subjective experiences and search strategies highlighting the benefits of the tactile cues. Our findings suggest that Tactile Search can enhance interaction and provide design considerations for integrating haptic search into interactive systems.

0.24

Vibes on Demand: Adding Vibrotactile Encoding to Line Charts Shows Experiential Benefits Without Performance Costs

cs.HC ·2026-08-15 ·Anchit Mishra, Oliver Schneider, Matthew Brehmer
similarity 0.67
Abstract

Details on demand is a common design pattern in visualization design, especially useful when interacting with visually-saturated or small displays. Beyond visualization, another common approach for saturated displays is to incorporate other modalities, such as haptic feedback. While haptic rendering in visualization has primarily targeted accessibility needs, with haptics as a substitute for visual feedback, studies using haptics outside of a visualization context have shown value in experiential factors, such as increased confidence in ambiguous contexts and higher engagement. We explore vibrotactile feedback as a reinforcing information channel for communicating trends in details-on-demand tooltips on touchscreens. We identify preferred parameter configurations for our haptic encoding, informed by a study where participants identified parameter configurations that they perceived to most accurately reflect the dynamics of line charts appearing in tooltips. In a second study, we evaluated participant performance in a pairwise comparison task, finding that incorporating vibrotactile encoding improves involvement without affecting accuracy. We discuss the implications of these findings for future visualization design, and propose directions for applications and future studies.

0.04

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.64
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.64
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

Sharing Roughness with Hand-Outline Visualization to Reduce Sensory Asymmetry in VR Collaboration

cs.HC ·2026-08-29 ·Minju Baeck, Yoonseok Shin, Hyunjin Lee, Boram Yoon, Sang Ho Yoon +1 more
published similarity 0.64
Abstract · 10 pages, 8 figures, 9 tables. Accepted for publication in TVCG Special Issue on the 2026 IEEE Symposium on Mixed and Augmented Reality (IEE…

In collaborative VR, asymmetric access to haptic hardware creates a critical information gap: tactile evidence remains private to the haptic user, hindering the shared understanding needed for joint decision-making. While prior work has explored crossmodal sensory cues in virtual environments, it remains unclear how such cues should be designed for asymmetric collaboration, where collaborators receive information through different modalities. In our setting, the haptic user feels roughness through fingertip vibration, whereas the non-haptic user relies on vision alone. To reduce this asymmetry, we propose externalizing an object's tactile state through a glanceable hand-outline visual proxy. Specifically, we examine whether abstract visual roughness cues based on line shape and motion can encode three discrete roughness levels for both haptic and non-haptic users. Two preliminary studies establish a shared visual semantics by identifying visually distinguishable cues for non-haptic users and validating their visuo-haptic correspondence for haptic users. In a main study of a collaborative sorting task, showing this visualization on both users' hands significantly reduced completion time relative to a no-visualization baseline. Moreover, NU-side cue visibility was associated with higher confidence and perceived contribution for the non-haptic user. These findings show that hand-anchored abstract visual cues provide a lightweight means of externalizing object tactile state, reducing information asymmetry without compromising social presence.

0.17

3DTouch: A Tactile-aware VLA Model with 3D Geometric Relations for Dexterous Manipulation

cs.RO ·2026-11-18 ·Xin Zhang, Shiqi Zhang, Siyuan Cao, Juncheng Cai, Yedong Shen +7 more
similarity 0.63
Abstract

In contact-rich dexterous manipulation, occlusion by the fingers and interacting objects obscures local geometry, preventing visual observations from fully capturing contact locations. Visually similar scenes may also differ subtly in the relative positions of interacting objects, leading to different contact states. We propose 3DTouch, a tactile-geometric conditioning approach for vision-language-action (VLA) models. 3DTouch constructs a shared 3D visuo-tactile representation by expressing RGB-D scene points and dense five-finger tactile measurements in the robot-base frame, preserving each taxel's spatial location and force vector. Hand-object and object-object relations derived from hand landmarks and pose-aligned reconstructed surfaces explicitly describe the relative arrangement of interacting entities. Together, these representations condition the VLA action expert on spatially localized contact forces and relative surface geometry, providing explicit cues for contact adjustment and object alignment. We evaluate 3DTouch on five real-world contact-rich dexterous manipulation tasks using a UR7e robot arm equipped with an XHand dexterous hand. 3DTouch improves the average success rate by 42 percentage points over the corresponding VLA baseline and by 20 percentage points over the strongest evaluated alternative. Ablation studies reveal the complementary benefits of scene geometry and spatial tactile feedback, with further gains from shared spatial grounding and explicit geometric relations.

0.19

TacPilot: Does Touch Need to Be Everywhere?

cs.RO ·2026-11-18 ·Yunzhen Zhang, Yuxiao Zhu, Jie Yang, Yufeng Miao, Bing Luo
similarity 0.63
Abstract · 10 pages, 5 figures, 2 tables

Tactile feedback helps visual manipulation policies respond to local contact, but changes in tactile observations do not always require corrective motion, and sustained corrections do not always require new tactile features. We introduce TacPilot, a tactile residual framework that separates representation updates from action intervention around a frozen visual policy. TacPilot uses a perception gate to determine when tactile features need refreshing and updates only affected regions while reusing unchanged features. A separate intervention gate determines whether bounded Cartesian and gripper residuals modify the nominal visual action. This separation allows tactile perception and action correction to follow different spatial and temporal demands during manipulation. In offline expert-trajectory replay, local feature reuse reduces encoded regions by 56.4% relative to periodic full encoding, with essentially unchanged action predictions. In an exploratory simulation evaluation spanning two cylinder sizes, TacPilot succeeds in 26 of 30 trials (86.7%). We further validate TacPilot on OpenArm v2 equipped with Paxini tactile sensors across four contact-rich manipulation tasks.

0.25