CS Paper Radar

TanCRAFT: Context-Reasoned Anticipatory Feedback for Assembly Tasks

Sassan Mokhtar, Lars Doorenbos, Marius Bock, Sina Mokhtar, Katharina Beckh, Dominik Bach, Juergen Gall

cs.RO cs.CV ·submitted 2026-11-10 18:33 UTC · v1

Abstract

Preventing human error in physical assembly tasks requires assistance systems that can intervene before mistakes are made. This is especially challenging in settings where users are free to choose the construction order and correctness depends on the evolving assembly rather than a fixed next step. We present TanCRAFT, a four-stage real-time predictive assistance system that tracks the scene state, reasons about the current partial assembly, forecasts the near-future motion of manipulated pieces, and intervenes when the predicted placement is incompatible with the target. We instantiate our framework and confirm its effectiveness in a controlled tangram assembly task through offline benchmarks and a within-subject user study. Our findings show that the predictive feedback significantly reduces mistakes relative to unguided and reactive sessions, while yielding the lowest mean perceived workload and shortest mean completion time. Overall, these results demonstrate the value of predictive feedback for error prevention and provide a step toward cost-aware assistance for automation and human-robot workcells.

Comment
This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Refine Actions If Needed: Adaptive Action Chunk Refinement for Robot Manipulation

cs.RO ·2026-10-14 ·Hanlin Liu, Zichen Zhou, Jiacheng Zhang, Liuyuan Na, Jin Jin +4 more
code/data similarity 0.68
Abstract

Computationally lightweight manipulation policies predict executable actions with low inference latency, but prediction errors can limit task success. Iterative generative policies can achieve higher task success rates, but repeated network evaluations increase inference latency. Refining action proposals from computationally lightweight policies can combine these strengths, but the amount of refinement needed varies across states. We introduce RAIN (Refine Actions If Needed), a framework that predicts action errors at different refinement levels to decide whether and how much to refine each executable proposal, before performing any refinement. We train an ensemble to predict these errors by comparing action proposals and their refined versions with expert actions from offline demonstrations, without requiring explicit labels of refinement needs. Calibration balances uncertainty, computation, and temporal consistency. We evaluate RAIN on eight ManiSkill tasks and four real-robot tasks. In simulation, our policy achieves 66.6% success, approaching the best evaluated diffusion-policy success rate with 5.71 times lower policy latency. On the real robot, success increases from 55.0% with Action Chunking with Transformers (ACT) to 72.5%, with comparable average successful completion time. Matched controls show that dynamic routing maintains the strongest observed fixed-refinement success level with 26.6% fewer refiner evaluations. Project page: https://rain-policy.github.io/.

0.27

AssemblyWorld: Rethinking 3D Assembly with General-Purpose Agents

cs.CV cs.RO ·2026-09-30 ·Jiahao Zhang, Yeying Fan, Moitreya Chatterjee, Suhas Lohit, Bernhard Egger +3 more
code/data similarity 0.67
Abstract · 24 pages, 11 figures. Project page: https://assemblyworld.github.io

The task of 3D assembly requires translating an understanding of parts and their relationships into precise spatial arrangements. Can pretrained general-purpose agents assemble objects through visual interaction without additional assembly-specific fine-tuning? To investigate this question, we introduce AssemblyWorld, an interactive 3D environment in which agents inspect rendered views and manipulate supplied rigid parts, guided by images or assembly manuals when available. Agents perceive part geometry through 2D views rather than direct access to mesh vertices or faces, while their resulting assemblies are evaluated geometrically. Building on this environment, we construct AssemblyWorldBench, comprising 100 assembly tasks across 80 objects spanning furniture, industrial assembly, and fracture reassembly. Evaluating eight agent systems reveals substantial differences in their capabilities. The strongest system achieves 80.9% part accuracy but 59.4% complete-assembly success. The evaluated open-source systems lag substantially behind their stronger closed-source peers in both execution reliability and assembly accuracy. Analyses of visual references, interaction trajectories, and failures show how agents revise assemblies while leaving residual positioning errors. AssemblyWorld provides a common setting for both assessing the capabilities of interactive assembly agents and characterizing the gap between approximate structure recovery and precise reconstruction.

0.28

A Vision Based Framework Integrating Attention and Action Cues for Interpretable Cognitive Workload Assessment in Human-Robot Collaborative Assembly

cs.RO ·2026-09-14 ·Junyan Xiong, Naiyi Feng, Xingke Xia, Qihang Fan, Suchang Chen +1 more
similarity 0.67
Abstract · 42 pages, 11 figures

The introduction of human-robot collaboration (HRC) in industrial assembly operations is revolutionizing the manufacturing landscape. In this evolving environment, operators are required to seamlessly coordinate their manual tasks with real-time task information and robotic behaviors. These demands fluctuate during operation, yet conventional workload assessments depend on body-worn physiological sensors that complicate practical deployment. Here, we present a vision-based attention--action framework for continuous and interpretable workload-related assessment in HRC assembly. The framework combines RGB-D observations with robot states and calibrated task-related areas to construct a temporally confirmed representation of operator behavior. This representation identifies where task demand is concentrated and explains how it develops when attention and action diverge, the task context changes, or the operator hesitates. We evaluated the framework in a three-level collaborative gearbox assembly experiment with ten participants, using subjective ratings and synchronized physiological signals as independent references. Raw NASA-TLX ratings confirmed increasing perceived workload across conditions, with significant effects on overall workload and its mental and temporal dimensions. The vision-derived HRC-CWL output was significantly associated with ECG-derived features in seven of nine participants with complete correlation data. Synchronized interaction episodes further showed temporal correspondence between detected hesitation and physiological activity. Real-time deployment demonstrated that the framework can operate without requiring operators to wear additional sensors. These findings support HRC-CWL as an interpretable behavioral proxy for cognitive ergonomics analysis and adaptive robot assistance, rather than a direct psychophysiological measure of workload.

0.29

Agentic Scaling of Embodied Tasks in Simulation for Synthetic Data Collection and Policy Evaluation

cs.RO ·2026-11-19 ·Kang Wang, Xiaolei Zhou, Xiaoyu Wu, Zhendong Wang
code/data similarity 0.66
Abstract · 12 pages. Dataset: https://huggingface.co/datasets/jimmy-zhou/AgenticTask-Kitchen-50 Project website: https://zxl502.github.io/AgenticTask/

Scaling embodied interaction data requires a broad collection of usable tasks, yet specifying and validating each task instance remains costly. We present AgenticTask, an agent-based framework that expands existing task collections under human intent. Its central representation links interaction requirements to object and part bindings, scene and robot configurations, initial conditions, and completion criteria. A task-generation agent reuses interaction structure to construct supported variations and revises incompatible configurations using validation feedback. A task-execution agent uses the same bindings and geometric records to select robot-supported skills and check completion against the original task criteria. On RoboCasa, the framework builds the AgenticTask collection, saving 16,450 task instances from 20,323 construction attempts at a throughput of 166.97 saved instances per elapsed hour, with 62.26% of construction attempts passing the configured physical checks. The execution agent completes approximately 38% of evaluated tasks, with successful cases spanning object placement, articulated manipulation, and sequential arrangement. Diagnostic analysis identifies improvement priorities in construction reliability, action selection, task-robot compatibility, and runtime integration. Together, these results demonstrate task-collection expansion with measured construction productivity and concrete execution evidence, providing a foundation for subsequent interaction-data collection for embodied AI.

0.37

End-to-End Autonomous Generation of Human Assembly Plans

cs.RO cs.GR ·2026-10-07 ·Faustin Arion von Arx, Millicent Schlafly, Mark D. Fuge
code/data similarity 0.66
Abstract · 22 pages, 10 figures

Turning a CAD design into an assembly plan is still largely done by hand, requiring engineers to reason about geometric feasibility, tool access, stability, and the ergonomics of human assembly. In this work, we encode long-established design for assembly (DfA) principles into a contained, end-to-end approach for generating assembly plans. Our approach takes only a mesh assembly and produces either a step-by-step assembly manual or a structured failure report, requiring no joint metadata, fastener annotations, or additional information. Four major components of a manufacturing plan are addressed autonomously: an assembly tool list, the assembly sequence and subassemblies, an assembly manual, and design feedback for improving assemblability. For determining the sequence plan, we systematically disassemble the object in a physics simulator and apply a cost function that encodes DfA principles. Manual generation, tool labelling, and assembly feedback rely primarily on multimodal large language models. Compared with a baseline that always removes the outermost part first from Tian et al., DfA-aware sequence planning reduces simulated assembly time, measured with a robot-arm assembly-time proxy, by 35% on 136 assemblies of 5 to 30 parts. The correct tool is selected for 88.6% of assembly steps. A vision-language model judge compares the generated manuals against ablated variants, identifying which page elements carry the information a reader needs. The presented approach and open-source code are available for use by engineers or AI agents looking to rapidly accelerate the creation of manufacturing plans for a given product design.

0.39

JARVIS: From Visual Manuals to Autonomous Robotic Assembly

cs.RO ·2026-10-20 ·Fan Ding, Fucai Ke, Kevin Yuchen Ma, Xuewen Luo, Wenyu Liang +3 more
benchmark similarity 0.66
Abstract

Visual manuals communicate procedural knowledge through stepwise diagrams, but translating these instructions into reliable long-horizon robotic execution remains challenging. We introduce JARVIS, a method-agnostic benchmark for autonomous visual-manual-guided execution without additional language instructions. JARVIS comprises 236,679 LEGO assembly tasks across 8,987 scenes, with a carefully curated JARVIS-v1 suite of 50 tasks for interactive robotic evaluation. Tasks span varying initial structural complexities and assembly horizons, requiring agents to interpret manuals, ground actions in an evolving workspace, and execute the intended procedure. A structure-aware evaluation protocol captures geometric accuracy, structural relations, construction order, partial progress, and completion. We further introduce JARVIS-agentic, a tool-grounded embodied agent that composes robot primitives into executable programs and uses execution feedback for verification and recovery, without task-specific action trajectories or model parameter updates. Across nine multimodal and reasoning models, task-oriented primitives increase the average assembly score. Performance nevertheless declines sharply with assembly horizon, and execution errors remain difficult to correct. Prior-task experience improves initial performance, while repeated reflection provides inconsistent benefits, highlighting persistent limitations in connecting visual procedural reasoning with reliable physical execution.

0.19

Dynamic Manipulation with World-Action Models via Counterfactual Planning

cs.RO cs.AIcs.CVcs.LG ·2026-09-27 ·Sunwoo Park, Wonbin Lee, Seonghyun Jin, Youngmin Kim, Jangho Park +1 more
code/data similarity 0.66
Abstract · 48 pages, including appendices. Project page: https://methoder00.github.io/DPP/

World-Action models (WAMs) trained on static demonstrations often fail to manipulate moving targets even when they possess the required manipulation skills. We attribute this failure to target-response collapse: as execution advances, the policy becomes increasingly biased toward the learned continuation of its ongoing behavior and less responsive to target relocation. To bridge the gap between what the model has learned and what it can generate from the current context, we formulate dynamic manipulation as counterfactual planning by decoupling the context used for plan generation from the physical state used for execution. Our framework, Dynamic Predictive Planning (DPP), first uses the WAM's predictive rollout to estimate when an interaction is expected to occur, and combines this timing estimate with observed target motion to predict the target's future interaction position. DPP then constructs a counterfactual observation that places this predicted target position in a familiar robot context, allowing the model to invoke an existing manipulation skill rather than generate a recovery behavior from an unfamiliar robot-target configuration. The resulting plan is connected to the robot's actual state during execution. DPP enables real-time dynamic manipulation on a single consumer GPU without additional training on dynamic data. Experiments in simulation and on a real robot demonstrate consistent improvements across diverse target motions, with simulation performance surpassing all evaluated baselines, including methods additionally trained on dynamic data. Project page: https://methoder00.github.io/DPP/

0.57

Reasoning on Call: Efficient Agentic Robot Control for Long-Horizon Robot Manipulation

cs.RO ·2026-11-19 ·Zilang Cen, Chao Tang, Fangcheng Liu, Weishi Mi, Wei Hao +6 more
similarity 0.65
Abstract

Large multimodal models can support long-horizon robot manipulation, but frequent model calls incur substantial latency and token costs. The central challenge is determining when agent assistance or intervention is needed and whether errors require correcting robot execution, subtask planning, or both. To address this problem, we propose RoC (Reasoning on Call), an efficient framework that coordinates a low-level policy and a high-level reasoning agent through an online task-state monitor. The monitor combines temporal visual observations with ordered interaction memory to jointly estimate progress within the active subtask and predict its successor. These predictions guide event-triggered agent review for coordinated execution repair and plan revision. Verified outcomes govern memory updates and subtask transitions, allowing routine execution to remain with the policy while reasoning focuses on decisions requiring additional assessment. On RMBench, RoC improves task success rate by 24.0 percentage points and reduces token consumption by 65.3% compared with the strongest agent-based baseline. It also outperforms the strongest policy-based baseline by 15.1 percentage points in task success rate. Real-world experiments further validate its effectiveness across three long-horizon manipulation tasks. Overall, RoC supports efficient agent intervention and coordinated recovery across execution and planning for long-horizon robot manipulation.

0.18