CS Paper Radar

The hidden solar cost of urban unfamiliarity

Lijia Liu, Yimeng Song

cs.CY ·submitted 2026-11-11 03:10 UTC · v1

Abstract

Unfamiliar walkers may follow the shortest route and miss nearby shade, indoor passages and multilevel connections. We define the resulting hidden solar cost as the direct-sun exposure avoidable through shade-informed routing without substantial detours. We developed a time-specific three-dimensional model of Hong Kong Island that combines indoor and outdoor walking networks with building geometry, vegetation mapped by light detection and ranging (LiDAR), and solar position. For 500 modelled journeys, we compared shortest and shade-informed routes at four daytime snapshots and five extra-distance limits. At noon, shade-informed routes reduced modelled direct-sun exposure by 13.5% relative to shortest routes under a 10% extra-distance limit. Route length increased by 2.85% on average. A 5% extra-distance limit delivered 77% of the reduction obtained at 10%. In a controlled comparison, outdoor shade information accounted for 86% of the reduction and indoor-protection information for 14%. Removing multilevel connections left only 191 of 500 journeys feasible within the original route-length limit. These route comparisons identify an avoidable solar cost when existing protection is missing from the information used to choose a route. Making protected routes visible and preserving their connections can reduce sun exposure without large detours.

Comment
75 pages, 5 main figures. Includes 63 pages of Supplementary Material

Closest papers

Nearest neighbours by meaning across the whole index.

HELIOS: From midnight to noon, continuous outdoor urban scene relighting

cs.CV ·2026-09-01 ·Hala Djeghim, Nathan Piasco, Luis Roldão, Moussab Bennehar, Dzmitry Tsishkou +2 more
code/datahot direction similarity 0.52
Abstract · Project page: https://hala-djeghim.github.io/HELIOS/

Modifying the illumination of driving images is a fundamental challenge, as most datasets are captured at specific times of day. Existing methods rely on synthetic data or paired multi-illumination supervision, which limits their generalization to the diverse and challenging conditions of real-world scenarios. To address this, we propose HELIOS, a novel image relighting approach that relies on unlabeled real-world datasets without requiring any paired images for training. Our approach integrates albedo-based conditioning into a cycle-consistent diffusion pipeline to prevent identity collapse and ensure accurate domain translation. To handle low-visibility nighttime conditions, we introduce a robust albedo distillation strategy that transfers structural stability from the daytime domain. Additionally, we replace traditional text prompts with a fine-grained control mechanism based on GPS-derived solar angles, enabling smooth and continuous lighting manipulation across the day-night cycle. Through extensive evaluation and a user study, we demonstrate that HELIOS produces structurally consistent and realistic results in both night-to-day and day-to-night tasks, outperforming state-of-the-art methods.

0.46

Shading-Aware Rooftop PV Placement

cs.CE ·2026-09-19 ·Tobias von Arx, Srinivasan Keshav
code/data similarity 0.51
Abstract

Rooftop photovoltaic (PV) design requires careful panel placement to make effective use of potentially limited roof space and available sunlight. Existing simplified roof models can miss objects and superstructures that shade panels. We simulate rooftop irradiance using hourly weather and a terrain horizon, computing shadows from nearby buildings, trees, and roof superstructures rendered from the Sun's viewpoint. Our method (i) infers existing panel layouts from imagery and estimates their yield, (ii) relocates these panels to improve the yield, and (iii) generates shading-aware layouts for new installations. We compare modeled yield with production records from 11 Swiss installations and evaluate new layouts in simulation on 19 additional rural roofs. Without knowledge of any electrical or system specifications, we obtain a median daily correlation with measured production of 0.982. Absolute energy estimates remain sensitive to system specifications. Comparing new layouts with equal panel counts, accounting for neighborhood and roof-detail shading changes the position or orientation of an average of 38.9\% of panels per roof. These layouts increase modeled annual yield by up to 7.91\% compared with layouts designed without accounting for neighborhood and roof-detail shadows. We publicly release our tool for modeling and designing rooftop PV installations with terrain, neighborhood, and roof-detail shading at https://github.com/tobiasvonarx/shading-aware-pv.

0.40

An Empirical Study on Learning Rooftop Solar Potential from Satellite Imagery Directly Without Explicit Geometry

cs.CV ·2026-10-30 ·Joshua Lee
code/data similarity 0.51
Abstract

Rooftop solar potential estimation often relies on LiDAR, digital surface models (DSMs), or pipelines that explicitly reconstruct roof geometry before estimating solar potential. We propose Direct Rooftop Solar Prediction (DRSP), an end-to-end formulation that maps satellite imagery and coarse regional sunlight information directly to application-level solar outputs. DRSP neither requires explicit geometric representations as input nor predicts roof orientation, slope, height, DSMs, or other geometric quantities as intermediate outputs, and therefore requires no geometric intermediate supervision. To enable large-scale study of this formulation, we develop a programmatic data-curation pipeline that converts per-panel information from the Google Solar API into usable-rooftop masks and spatial solar-energy targets, yielding two geographically distinct datasets containing approximately 60K rooftops from the U.S. Midwest and 87K from Texas. We demonstrate the feasibility of DRSP and systematically characterize the effects of geographic training distribution, model depth, image resolution, regional sunlight conditioning, and heatmap regression objectives. Overall, our results suggest that useful rooftop-scale solar information can be learned directly from 2D imagery without explicit geometric intermediate representations, offering a simpler path toward large-scale solar assessment. Our code and dataset are available at https://github.com/joshualee124/direct_rooftop_solar_prediction.

0.38

Visibility on Terrains

cs.CY ·2026-09-30 ·Laura Toma
similarity 0.50
Abstract · 10 pages, 2 figures, chapter invited to the Encyclopedia of GIS

This chapter surveys terrain visibility models, algorithms, and applications. It introduces basic definitions, from line-of-sight, single-viewpoint viewsheds to cumulative and total viewsheds, on both Triangulated Irregular Network (TIN) and regular grid terrains. Reviews exact and approximate algorithms and highlights key application domains including archaeology, visual exposure to greenery, scenic route management, and land conservation.

0.31

Modeling the Travel Time-Pollution Exposure Trade-off in Urban Route Choice

cs.CE cs.CY ·2026-11-11 ·Cafer Avci, Zhaoyao Bao, Maximilian Dittgen, Danni Lu, Alireza Yazdiani +2 more
similarity 0.50
Abstract · 29 pages, 4 figures, under-review with the journal

Traffic-related air pollution is a major contributor to respiratory and cardiovascular disease, and travel time disproportionately drives daily exposure. Conventional routing algorithms minimize time or distance, ignoring street-level pollutant variability and leaving travelers exposed to avoidable risk. We develop a bi-objective routing framework that couples a high-resolution AERMOD-based PM2.5 dispersion surface with a shortest-path algorithm. The algorithm uses a deterministic, gradient-based weight-update scheme to enumerate Pareto-optimal paths along the time-exposure frontier. We apply the framework to 790,000 origin-destination pairs on New York City's road network, covering 1.48 million daily commuters. Link-level concentrations differed by a factor of two or more between adjacent parallel streets. Exposure-aware routes reduced cumulative exposure by about 38% at a median travel time increase of about 28%. The algorithm ran in 30 milliseconds per query and recovered more frontier paths than uniform weight sampling (4.5 vs. 2.4). These results show that exposure-aware routing is computationally practical at metropolitan scale and suitable for real-time navigation and infrastructure planning.

0.19

Analysis of trade-offs in urban heat mitigation using a Bayesian Optimization framework for an urban canopy layer model

cs.CE physics.ao-ph ·2026-09-22 ·Rebekka Walter, Johanna Gelhaus, David Anton, Henning Wessles, Stephan Weber
similarity 0.50
Abstract

To mitigate the challenges of climate change and intensifying heat stress in urban areas, local adaptation strategies are discussed and introduced in cities worldwide. To understand processes and potential trade-offs of these strategies a Bayesian optimization and surrogate modeling framework was employed to investigate urban parameter ranges of heat mitigation strategies with focus on three thermal metrics: daytime air temperature, Universal Thermal Climate Index (UTCI), and nighttime air temperature. Based on an urban street canyon configuration, it was shown that heat mitigation measures that reduce daytime air temperature and UTCI are often associated with higher nighttime temperatures. This results in a curved Pareto front that reflects the trade-off between daytime and nighttime thermal comfort. Under identical forcing conditions, different urban configurations, varying in geometry, vegetation, and surface characteristics, are shown to alter peak canyon air temperature by up to 5.2~$^\circ$C during the day and 2.6~$^\circ$C at night, while UTCI varies by up to 7.9~$^\circ$C, demonstrating that favorable urban configurations can substantially mitigate microclimatic heat stress. These findings suggest that combining multi-objective Bayesian optimization and surrogate modeling can help bridge the gap between computationally intensive climate simulations and practical decision-making in urban planning. An interactive visualization tool was developed to explore these trade-offs, making the often opposing relationships between urban parameters and the three thermal metrics directly accessible to planners.

0.26

A Transfer Learning-Driven Methodology for Efficient and Sustainable Indoor Localization Using VLC

cs.LG eess.SP ·2026-10-21 ·Masood Jan, Wafa Njima, Xun Zhang, Alexander Artemenko
published similarity 0.49
Abstract

The rapid expansion of the Internet of Things enables seamless collaboration among connected devices, making indoor localization a critical component of industrial automation. However, conventional localization techniques struggle in dynamic environments. These methods depend on extensive, frequent data collection and environment-specific calibration, limiting scalability, interoperability, and effective use of prior research while imposing significant energy penalties that hinder practical deployment. To address these challenges, we propose an energy-efficient transfer learning (TL) based approach for visible light communication based indoor localization. Our method leverages TL to tackle environmental variability, including lighting fluctuations and physical obstacles that typically degrade localization performance, while simultaneously reducing computational overhead and energy consumption compared to conventional approaches. We also introduce a novel model efficiency (ME) metric, designed to integrate localization accuracy, energy efficiency, data efficiency, and transfer gain into a single evaluative measure for comprehensive optimization. Evaluations on a real-world dataset collected from a BOSCH factory demonstrate that our model achieves a 47% improvement in localization accuracy compared to a conventional model that does not utilize TL, and achieves up to 67.5% ME with TL models, compared to only 10.4% in conventional models under high-noise conditions. These results underscore the potential of our approach to deliver a highly efficient and scalable indoor localization system suitable for energy-constrained industrial applications.

0.63

Routes planning in a condominium company using mathematical optimization

cs.DM math.OC ·2026-10-14 ·Lara Rocha, Pedro Martins
similarity 0.49
Abstract · 29 pages, 4 figures

This work focuses on planning daily routes for a group of employees of a condominium company. Given a set of employees and a set of customers with pre-scheduled visits, we want to build doubly-open routes to guarantee visits to all customers, ensuring that each customer is visited by an employee with the appropriate skills to carry out the required activity. The travel times between customers and the service time in each customer are known. The problem includes time windows for visiting customers, each employee has a maximum working time, and the daily working period is between 9 AM and 6:30 PM. The routes respect the lunch break period if they extend from morning to afternoon, which means that lunch break can be avoided if the route is fully completed in the morning or in the afternoon. The aim is to minimize the distance covered by all routes with a penalty for including lunch breaks. The distances and times between customers are collected via an API to Microsoft Azure; and the solutions are then displayed on Bing Maps. The results obtained show the operational advantages of an efficient and effective vehicle routing planning in a specific condominium management company. The model can be extended to other service provider companies.

0.30