CS Paper Radar

Are We Ready for Snow-tonomous Driving? Challenges Toward Robust Automated Driving in Extreme Weather

Eren Erdal Aksoy, Abu Mohammed Raisuddin, Thien-Thu Ngo, Eren Aydemir, Osman Tahir Ekşi, Paula Litkey, Petri Manninen, Heikki Hyyti, Jyri Maanpää, Tarmo Kivioja, Tuomas Herranen, Väisänen Sofie, Niemi Kalle, Isabelle Morvan, Pierre Duthon, Ian Marsh, Martin Sanfridson, Henrik Toss, Thanh Bui, Yuri Poledna, Maikol Funk Drechsler, Mikko Tarkiainen, Matti Kutila, Topi Miekkala, Stefan Parzefall, Valentina Donzella, Pak Hung Chan, Sogol Kharrazi, Mario Ceccarelli

cs.RO cs.AIcs.CV ·submitted 2026-11-11 09:10 UTC · v1

Abstract

Automated driving has gained remarkable momentum over the past decade, with both industry and academia investing substantial resources in developing perception and control solutions to advance vehicle autonomy. However, these efforts have largely focused on clear-weather scenarios, leaving harsh conditions, such as snow, rain, and fog, comparatively understudied. As a result, inclement weather remains one of the most significant hurdles for autonomous vehicles, often leading to substantial performance degradation in downstream perception and control tasks. In this paper, we present insights from the EU-funded Horizon Europe project ROADVIEW, which aims to develop robust, weather-aware perception and control modules for connected and automated vehicles operating under severe conditions, including snow, rain, and fog. Drawing on four years of large-scale development and real-world demonstrations across multiple vehicle platforms in different locations, we identify ten key challenges that hinder the development of weather-resilient autonomy, including data scarcity, domain shifts, limitations in multimodal perception, control robustness, and validation gaps, among others. We summarize these challenges and lessons learned toward enabling reliable snow-autonomous driving, highlighting critical directions for future research and standardization.

Closest papers

Nearest neighbours by meaning across the whole index.

How Reliable Are Object Detection Models Beyond Clear Weather? A Deployment-Oriented Robustness Study for Autonomous Driving

cs.CV ·2026-10-15 ·Munshaibur Rahman Mahin, Isha Das, Most. Sonia Islam, Mohammad Sakib Mahmood, M. F. Mridha +1 more
similarity 0.69
Abstract

Autonomous driving perception systems must maintain reliable object detection under diverse environmental conditions, not only in clear daytime scenes. However, the cross-weather robustness of modern detectors remains insufficiently characterised under source-only evaluation. This study evaluates representative object detection architectures trained exclusively on clear daytime driving scenes and tested without adaptation under unseen fog, rain, snow, and night conditions. The evaluation covers lightweight and medium-scale one-stage, two-stage, and transformer-based detectors within a unified protocol. Robustness is assessed using performance Drop (%), a Weather Robustness Index (WRI), and class-level sensitivity analysis for critical road participants, including cars, buses, trucks, and persons. Prediction confidence reliability under environmental domain shift is measured using Expected Calibration Error (ECE). Results reveal consistent performance degradation in adverse conditions, reaching 62.90% at night. Buses show the highest sensitivity to environmental variability, while cars remain comparatively stable across weather transitions. Comparisons indicate that YOLO-based detectors exhibit the lowest calibration mismatch, reflecting stronger agreement between predicted confidence and empirical detection correctness. In contrast, DETR achieves the lowest robustness score, with a WRI of 0.6859, indicating greater vulnerability to cross-weather domain shift. These findings offer deployment-oriented insights into detector robustness and confidence reliability for safety-critical intelligent vehicle perception systems.

0.17

Autoware in Construction: Gap Analysis and LiDAR Perception Toward Off-Road Autonomous Driving

cs.RO ·2026-10-03 ·Yu Otsuki, Teja Emmey, Sena Matsushita, Akiro Harada, Takeshi Miura
publishedcode/data similarity 0.68
Abstract · 2026 IROS 5th Workshop on Future of Construction, 4 pages, 5 figures

Autoware is an open-source autonomous driving software platform widely adopted by researchers and industry developers. Originally developed primarily for public-road applications, including passenger vehicles, taxis, and buses, Autoware is increasingly being extended to off-road environments such as construction and agricultural sites. Construction sites, however, differ fundamentally from public roads and challenge many assumptions underlying conventional autonomous driving systems. They are characterized by unstructured terrain, airborne dust, continuously evolving site conditions, and construction-specific objects. This paper presents lessons learned from ongoing efforts to extend an Autoware-based autonomous driving system to large dump trucks operating at construction sites. We identify gaps between public-road and off-road construction applications across the sensing, mapping, localization, perception, planning, and control modules of the Autoware stack. We then discuss potential solutions for addressing these gaps, with particular emphasis on ongoing LiDAR-based perception pipeline development and findings from field testing. Finally, we propose a roadmap toward end-to-end autonomous driving for construction vehicles.

0.37

Real-World Perception for Autonomous Driving in Adverse Weather: Enhancing Standard Detectors via Foundation-Guided Auto-Annotation

cs.CV ·2026-09-22 ·Sepideh Gohari, Goodarz Mehr, Azim Eskandarian
benchmark similarity 0.67
Abstract · Submitted to IEEE for review

Standard deployment-ready object detectors for autonomous vehicles degrade in adverse weather and lighting conditions without being trained on extensive domain-specific data. While large-scale vision foundation models offer robust zero-shot generalization, their high computational cost makes them impractical for real-time deployment. To bridge this gap, we propose a foundation-guided auto-annotation pipeline that enhances standard detectors without architectural changes. We first benchmark three distinct models, YOLOv8, Co-DETR, and SAM3, on our custom real-world driving dataset spanning 25 unique operational scenarios across various route, weather, and lighting conditions. Based on our analysis, SAM3 demonstrates superior accuracy and resilience across all scenarios. Thus, we deploy it as an offline auto-annotator to generate pseudo-labels on the unannotated subset of our dataset. Fine-tuning the baseline YOLOv8 on these annotations yields a 16.04% higher overall mean Average Precision (mAP) and improves cross-environmental stability compared to the baseline model, highlighted by a 32.73% and 28.65% mAP increase in Residential Direct Sunlight and Highway Fog, respectively. These results demonstrate that standard detectors can achieve environmental resilience without the need for extensive manual annotation or architectural modifications.

0.20

Autonomous Trail Racing with a Bicycle Robot

cs.RO ·2026-11-11 ·Fabian Jenelten, Deepana Ishtaweera, Pablo Garcia, Liana Margolese, Igor Bogoslavskyi +8 more
code/data similarity 0.66
Abstract · 35 pages, 10 figures, 3 tables (incl. appendix with supplementary figures and tables). Submitted to The International Journal of Robotics Re…

Navigating off-road trails on a mountain bike requires diverse locomotion skills, including aerial maneuvers, cornering, and slip recovery, paired with sophisticated perception for scene understanding. Translating these capabilities to autonomous, two-wheeled robots remains a formidable challenge. We show that autonomous, high-speed trail navigation can be achieved through a single idea: encoding the trail as a semantic layer of the terrain. In simulation, this layer embeds the navigation task into the training environment; during deployment, it is reconstructed onboard from camera and LiDAR data. First, we introduce a unified learning framework that treats local navigation and locomotion as a joint optimization problem, bypassing the twist or pose command interface of classical control hierarchies. With fixed reward weights, the same framework produces both trail racing and agile parkour, shaped only through terrain semantics and episode length. Second, our perception pipeline combines a frozen vision foundation model with a lightweight dual-head decoder that predicts per-pixel terrain semantics and confidence scores, which are fused with LiDAR range measurements into an egocentric semantic elevation map at 30 Hz onboard an NVIDIA AGX Orin. We validate our framework on the Ultra Mobility Vehicle (UMV), a bicycle robot that autonomously raced across all sections of a kilometer-long, unstructured mountain bike trail at speeds exceeding 5 m/s and averaging 3.26 m/s. In simulation, our policy fails up to an order of magnitude less often than hierarchical baselines while driving faster.

0.41

MS-DOTT: A Multi-Modal Dataset for Off-Road Traversability Estimation

cs.RO ·2026-11-02 ·Shivani Subramanyan, Saksham Sharma, Samahith SA, Ahaan Kotian, Suresh Sundaram
published similarity 0.66
Abstract · Accepted to RAAI Conference 2026

Autonomous robots are gaining traction in off-road environments, driven by their rising demand in agriculture, defense, and search-and-rescue operations. However, these environments are inherently unpredictable and navigation remains a formidable challenge given the complex environmental conditions including challenging terrain and varying illumination. Off-road autonomy requires robust perception across multiple spatial scales and imaging modalities, yet most sensing setups struggle to capture both far-field environmental context and near-field terrain detail simultaneously across various illumination conditions. To facilitate development of robust off-road perception and traversability estimation systems, we propose MS-DOTT (Multi-Sensor Dataset for Off-road Terrain Traversability) a comprehensive multi-modal off-road dataset with long-range 3D sensing and short-range, fine-grained perception to facilitate high-fidelity terrain understanding by combining proprioceptive signals for tracking vehicle dynamics with exteroceptive imaging and pointcloud data. The dataset includes trajectories recorded across nominal lighting, low-light, and no-light conditions with diverse 2D and 3D sensing for both long-range large-scale and short-range high-resolution sensing, as well as 4D RADAR measurements that provide velocity estimates for detected pointclouds. We demonstrate the utility of the dataset by adapting a SOTA multi-sensor fusion method for the purpose of traversability estimation. This dataset will aid the robotics community in advancing research and development of methods for traversability estimation, off-road perception and multi-sensor fusion in unstructured environments.

0.21

Beyond the Snowflakes: Disentangling Weather Effects from Confounding Meta-Factors in LiDAR Object Detection

cs.CV cs.RO ·2026-10-09 ·Yiming Yang, Jeremy P. Bos
publishedcode/data similarity 0.66
Abstract · IROS 2026, 8 pages, 8 figures

Light Detection and Ranging (LiDAR) is critical for autonomous perception, yet its performance is known to degrade in adverse weather. While existing literature models snow as atmospheric noise that degrades performance, our granular evaluation on the WADS-3D and CADC datasets reveals a counter-intuitive phenomenon: detection accuracy consistently improves as snow intensity increases. Through ablation study and meta-information analysis, we reconcile this by confirming that while falling snow acts as noise, its negative impact is outweighed by a dominant, concurrent factor: significantly increased object point count. We hypothesize that this object point count boost acts as a geometric enhancement, driven by snow accumulation increasing vehicle surface area and a shift from specular to diffuse reflectance. Our findings demonstrate that evaluating perception systems using broad weather-severity bins without accounting for correlated object-level data can lead to misleading conclusions about detector robustness. We conclude that accurate evaluation requires decoupling atmospheric noise from surface accumulation effects and outline future research to validate these physical models. The WADS-3D dataset is available at: https://digitalcommons.mtu.edu/wads-3d/.

0.35

SV2V-RSim: A Comprehensive Benchmark for Self-Selective V2V Cooperative Perception with Near-Realistic Data

cs.CV ·2026-09-26 ·Yulu Wu, Chao Wei, Jujun Cheng, Zhangkai Ni, Haowen Wang +4 more
benchmark similarity 0.65
Abstract

Vehicle-to-Vehicle (V2V) cooperative perception enhances autonomous driving by enabling vehicles to share information beyond their direct line of sight. However, existing V2V datasets are limited by a small number of participating agents, static collaborator selection strategies, and a significant domain gap between simulated and real-world environments. To overcome these challenges, we introduce SV2V-RSim, a large-scale, multi-modal, near-realistic simulation dataset engineered to elevate agent diversity and realism. Additionally, we present the Select Vehicles Adaptively (SVA) module, which optimizes collaborator selection to balance perception performance against communication bandwidth constraints. Our dataset is generated using the Unreal Engine 5-based simulator that integrates high-fidelity 3D assets, diverse environments, and intricate traffic scenarios. All vehicles within a specified range of the ego vehicle are equipped with sensor suites, enabling dynamic and adaptive collaborator selection. SV2V-RSim encompasses four maps, four weather conditions, six time periods from sunrise to night, 203K LiDAR frames, 402K RGB frames, and 788K annotated 3D bounding boxes across 17 object classes, supporting a range of cooperative perception tasks such as 3D object detection, segmentation, and depth estimation. Benchmarking on recent cooperative perception algorithms demonstrates that SVA achieves a superior performance-bandwidth trade-off, while sim-to-real experiments and No-Reference Image Quality Assessment validate the dataset's high realism and practical effectiveness. Our dataset and code will be publicly available.

0.27

Weather-Aware Domain Adaptation for Street-View Weather Recognition

cs.CV cs.LG ·2026-10-01 ·Hossein Maghsoumi, George Atia, Yaser P. Fallah
publishedbenchmark similarity 0.65
Abstract · 7 pages, 3 figures, 4 tables. Published in the 2026 IEEE Conference on Technologies for Sustainability (SusTech)

Adverse conditions such as rain, snow, fog, and dust remain challenging for camera-based perception in autonomous driving. We study multi-class weather recognition from street-view images under domain shift, where most available training data come from non-street-view sources that differ markedly from real driving scenes. We propose Weather-Aware Adversarial Discriminative Domain Adaptation (WA-ADDA), which conditions the domain discriminator on predicted weather to promote features that are both domain-invariant and weather-sensitive. We also assemble a multi-dataset benchmark by unifying diverse non-street-view weather collections as sources and real street-view images as targets, and define a standardized evaluation protocol with macro accuracy as the primary metric. Across backbones (ResNet-50, EfficientNet, VGG, DenseNet), WA-ADDA consistently improves street-view performance and yields strong per-class recalls in challenging conditions while preserving clear-weather accuracy. These findings highlight the feasibility of domain-adapted weather recognition and the value of our benchmark for advancing robust, on-board perception.

0.25