CS Paper Radar

How Reliable Are Object Detection Models Beyond Clear Weather? A Deployment-Oriented Robustness Study for Autonomous Driving

Munshaibur Rahman Mahin, Isha Das, Most. Sonia Islam, Mohammad Sakib Mahmood, M. F. Mridha, Md. Jakir Hossen

cs.CV ·submitted 2026-10-15 17:00 UTC · v1

Abstract

Autonomous driving perception systems must maintain reliable object detection under diverse environmental conditions, not only in clear daytime scenes. However, the cross-weather robustness of modern detectors remains insufficiently characterised under source-only evaluation. This study evaluates representative object detection architectures trained exclusively on clear daytime driving scenes and tested without adaptation under unseen fog, rain, snow, and night conditions. The evaluation covers lightweight and medium-scale one-stage, two-stage, and transformer-based detectors within a unified protocol. Robustness is assessed using performance Drop (%), a Weather Robustness Index (WRI), and class-level sensitivity analysis for critical road participants, including cars, buses, trucks, and persons. Prediction confidence reliability under environmental domain shift is measured using Expected Calibration Error (ECE). Results reveal consistent performance degradation in adverse conditions, reaching 62.90% at night. Buses show the highest sensitivity to environmental variability, while cars remain comparatively stable across weather transitions. Comparisons indicate that YOLO-based detectors exhibit the lowest calibration mismatch, reflecting stronger agreement between predicted confidence and empirical detection correctness. In contrast, DETR achieves the lowest robustness score, with a WRI of 0.6859, indicating greater vulnerability to cross-weather domain shift. These findings offer deployment-oriented insights into detector robustness and confidence reliability for safety-critical intelligent vehicle perception systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Weather Adaptive Autonomous Driving

cs.CV ·2026-11-03 ·Nicholas Taylor, Alexander Picon, Sudip Dhakal
similarity 0.70
Abstract

Camera object detectors lose recall in rain, fog, snow and sand, and the confidence threshold at which a detector is deployed decides how many objects it misses and how many false alarms it raises. We study how a frozen detector should make this decision in adverse weather. We first reproduce SeqCRC, a conformal object detector whose first step calibrates the confidence threshold by conformal risk control (CRC), and use that step, calibrated separately in each weather condition, as our baseline. With YOLOv8x it keeps the held-out miss fraction within a 20% budget in every DAWN weather bin, where a single global threshold fails in fog, but the false alarms it needs are an output rather than a choice: from 1.6 to 117 per image across DAWN and BDD100K conditions. We then propose a calibrated trade-off dial. One setting, $λ$, the number of false alarms accepted to avoid one missed object, selects the expected-cost-optimal decision rule: either one score threshold, or a per-detection rule that keeps a box when its calibrated probability of being a real object, estimated by gradient-boosted trees from the detector's own per-box outputs, is at least $1/(1+λ)$. F-score preferences map onto the same dial, and CRC applied to $λ$ itself is planned to restore a per-condition miss guarantee. The dial is fitted once on BDD100K train and graded only on BDD100K val and DAWN.

0.16

Beyond the Snowflakes: Disentangling Weather Effects from Confounding Meta-Factors in LiDAR Object Detection

cs.CV cs.RO ·2026-10-09 ·Yiming Yang, Jeremy P. Bos
publishedcode/data similarity 0.70
Abstract · IROS 2026, 8 pages, 8 figures

Light Detection and Ranging (LiDAR) is critical for autonomous perception, yet its performance is known to degrade in adverse weather. While existing literature models snow as atmospheric noise that degrades performance, our granular evaluation on the WADS-3D and CADC datasets reveals a counter-intuitive phenomenon: detection accuracy consistently improves as snow intensity increases. Through ablation study and meta-information analysis, we reconcile this by confirming that while falling snow acts as noise, its negative impact is outweighed by a dominant, concurrent factor: significantly increased object point count. We hypothesize that this object point count boost acts as a geometric enhancement, driven by snow accumulation increasing vehicle surface area and a shift from specular to diffuse reflectance. Our findings demonstrate that evaluating perception systems using broad weather-severity bins without accounting for correlated object-level data can lead to misleading conclusions about detector robustness. We conclude that accurate evaluation requires decoupling atmospheric noise from surface accumulation effects and outline future research to validate these physical models. The WADS-3D dataset is available at: https://digitalcommons.mtu.edu/wads-3d/.

0.35

Real-World Perception for Autonomous Driving in Adverse Weather: Enhancing Standard Detectors via Foundation-Guided Auto-Annotation

cs.CV ·2026-09-22 ·Sepideh Gohari, Goodarz Mehr, Azim Eskandarian
benchmark similarity 0.70
Abstract · Submitted to IEEE for review

Standard deployment-ready object detectors for autonomous vehicles degrade in adverse weather and lighting conditions without being trained on extensive domain-specific data. While large-scale vision foundation models offer robust zero-shot generalization, their high computational cost makes them impractical for real-time deployment. To bridge this gap, we propose a foundation-guided auto-annotation pipeline that enhances standard detectors without architectural changes. We first benchmark three distinct models, YOLOv8, Co-DETR, and SAM3, on our custom real-world driving dataset spanning 25 unique operational scenarios across various route, weather, and lighting conditions. Based on our analysis, SAM3 demonstrates superior accuracy and resilience across all scenarios. Thus, we deploy it as an offline auto-annotator to generate pseudo-labels on the unannotated subset of our dataset. Fine-tuning the baseline YOLOv8 on these annotations yields a 16.04% higher overall mean Average Precision (mAP) and improves cross-environmental stability compared to the baseline model, highlighted by a 32.73% and 28.65% mAP increase in Residential Direct Sunlight and Highway Fog, respectively. These results demonstrate that standard detectors can achieve environmental resilience without the need for extensive manual annotation or architectural modifications.

0.20

Are We Ready for Snow-tonomous Driving? Challenges Toward Robust Automated Driving in Extreme Weather

cs.RO cs.AIcs.CV ·2026-11-11 ·Eren Erdal Aksoy, Abu Mohammed Raisuddin, Thien-Thu Ngo, Eren Aydemir, Osman Tahir Ekşi +24 more
similarity 0.69
Abstract

Automated driving has gained remarkable momentum over the past decade, with both industry and academia investing substantial resources in developing perception and control solutions to advance vehicle autonomy. However, these efforts have largely focused on clear-weather scenarios, leaving harsh conditions, such as snow, rain, and fog, comparatively understudied. As a result, inclement weather remains one of the most significant hurdles for autonomous vehicles, often leading to substantial performance degradation in downstream perception and control tasks. In this paper, we present insights from the EU-funded Horizon Europe project ROADVIEW, which aims to develop robust, weather-aware perception and control modules for connected and automated vehicles operating under severe conditions, including snow, rain, and fog. Drawing on four years of large-scale development and real-world demonstrations across multiple vehicle platforms in different locations, we identify ten key challenges that hinder the development of weather-resilient autonomy, including data scarcity, domain shifts, limitations in multimodal perception, control robustness, and validation gaps, among others. We summarize these challenges and lessons learned toward enabling reliable snow-autonomous driving, highlighting critical directions for future research and standardization.

0.25

FogTTA: Online Test-Time Adaptation for Robust Transformer-based Object Detection in Foggy Weather

cs.CV cs.AI ·2026-10-21 ·Ali Abedi, Q. M. Jonathan Wu, Ning Zhang, Shiqi Tian
top venue similarity 0.67
Abstract · Published in Proceedings of the 39th Canadian Conference on Artificial Intelligence (Canadian AI 2026), PMLR 318:13-24. Available at https:/…

Object detection models for autonomous driving commonly experience substantial performance drops when deployed under adverse weather due to the domain shift between training data and real-world operating conditions. This degradation is especially evident when models trained on clear-weather images encounter foggy environments with reduced visibility and contrast. To address this challenge, we introduce FogTTA, an online test-time adaptation framework designed to improve the robustness of Transformer-based object detectors in fog. Using RF-DETR as the underlying object detector, FogTTA enables real-time adaptation to the streaming target domain without requiring source data or retraining. The framework follows a teacher-student design, where the deployed model serves as the teacher and generates pseudo labels from weakly augmented target inputs. These predictions are subsequently refined through non-maximum suppression and confidence filtering. The student model then learns from strongly augmented target sample using the Varifocal loss to mitigate pseudo-label noise. The teacher is updated via exponential moving averaging to ensure stable and continuous adaptation. Experiments show that FogTTA outperforms prior baselines, delivering improved detection accuracy and stability while maintaining real-time performance.

0.46

One-Stage Object Detectors in Autonomous Driving

cs.CV cs.AI ·2026-08-19 ·Jonel Roman, Ryan Sirjue, Peter Nguyen, Daniel Krutky, Juan Jesus +1 more
surveybenchmark similarity 0.67
Abstract

Autonomous vehicles depend on fast and reliable perception systems to detect surrounding vehicles, pedestrians, cyclists, traffic signs, and other road objects in real time. This paper presents a comprehensive survey and analysis of one-stage object detectors for autonomous driving rather than an implementation of a new detection system. The survey reviews the evolution of major one-stage detectors, including YOLOv1, SSD, RetinaNet, EfficientDet, anchor-free detectors such as FCOS and CenterNet, and recent real-time models such as YOLOv10. It compares these architectures through their design choices, feature-fusion strategies, loss functions, deployment trade-offs, and reported benchmark performance. The paper also summarizes commonly used autonomous-driving datasets, evaluation metrics, open challenges, and future research directions. Overall, this survey highlights how one-stage detectors balance speed, accuracy, efficiency, and robustness, while also emphasizing the remaining gap between benchmark results and dependable real-world autonomous-driving performance.

0.26

Weather-Aware Domain Adaptation for Street-View Weather Recognition

cs.CV cs.LG ·2026-10-01 ·Hossein Maghsoumi, George Atia, Yaser P. Fallah
publishedbenchmark similarity 0.65
Abstract · 7 pages, 3 figures, 4 tables. Published in the 2026 IEEE Conference on Technologies for Sustainability (SusTech)

Adverse conditions such as rain, snow, fog, and dust remain challenging for camera-based perception in autonomous driving. We study multi-class weather recognition from street-view images under domain shift, where most available training data come from non-street-view sources that differ markedly from real driving scenes. We propose Weather-Aware Adversarial Discriminative Domain Adaptation (WA-ADDA), which conditions the domain discriminator on predicted weather to promote features that are both domain-invariant and weather-sensitive. We also assemble a multi-dataset benchmark by unifying diverse non-street-view weather collections as sources and real street-view images as targets, and define a standardized evaluation protocol with macro accuracy as the primary metric. Across backbones (ResNet-50, EfficientNet, VGG, DenseNet), WA-ADDA consistently improves street-view performance and yields strong per-class recalls in challenging conditions while preserving clear-weather accuracy. These findings highlight the feasibility of domain-adapted weather recognition and the value of our benchmark for advancing robust, on-board perception.

0.25

Context-aware Bayesian Fusion for Multimodal Object Detection

cs.CV ·2026-10-13 ·Arunachalam Venkatachalam, Mhafuzul Islam, Marwan Yusuf, David Van Hamme, Ben Stoffelen +1 more
similarity 0.64
Abstract

Reliable detection of pedestrians and road users is essential for the safe operation of autonomous vehicles. However, this task becomes increasingly challenging under adverse environmental conditions, such as poor weather and low lighting, where the performance of state-of-the-art pre-trained object detectors and on-board sensors tends to degrade, which limits their effectiveness and reliability. Moreover, retraining models for each operating context imposes significant constraints due to high data requirements, computational resources, and time. Considering this, we propose a novel context-aware multimodal late fusion approach that integrates a lightweight gating network within our probabilistic calibration framework. The gating network extracts environmental context and dynamically modulates the detection outputs of pre-trained object detectors based on the inferred context, without retraining of the detectors. Our methodology is evaluated on a modified KITTI dataset, in which the camera images and lidar pointclouds are augmented for varying fog levels. Experimental results show that our approach yields an approximately 14% relative improvement over non-adaptive late fusion baselines, achieving a consistent average precision of 56% across different fog levels.

0.24