CS Paper Radar

Transverse impact of a Hertzian sphere with an infinite Rayleigh beam

Saranya Biswas, Anindya Chatterjee

cs.CE ·submitted 2026-11-12 13:41 UTC · v1

Abstract

We study the impact of a Hertzian sphere on an infinite Rayleigh beam, which presents both interesting possibilities for numerical approximation as well as new insights in the multiple-contact-event regime. Here, Galerkin projection using an abstract continuous variable replaces the history-dependent convolution in the impact equations by a system of local-in-time ordinary differential equations. The corresponding approximate solutions are validated against direct numerical solution of the convolution-based formulation and show agreement. Unlike the corresponding Euler-Bernoulli beam impact problem, which is governed by a single nondimensional parameter, the Rayleigh beam impact dynamics is governed by two nondimensional parameters. A parametric study reveals three distinct impact regimes: one regime with a single contact followed by permanent separation, a second regime with a single contact that is sustained thereafter, and an intervening regime with initial separation followed by multiple contact events with diminishing amplitudes, leading eventually to sustained contact. Short- and long-time asymptotic analyses are used to characterize the boundaries between the permanent separation and the re-contact regimes in different parameter regimes. The three significant new aspects of this paper are the system itself (Rayleigh beam instead of Euler Bernoulli beam), the model order reduction achieved through Galerkin projection in an abstract domain, and the detailed parametric study leading to a simple qualitative picture of possible behaviours.

Closest papers

Nearest neighbours by meaning across the whole index.

Transverse impulse response of finite and infinite Rayleigh beams

cs.CE ·2026-10-14 ·Saranya Biswas, Anindya Chatterjee
unusual similarity 0.66
Abstract

Here, we study an undamped Rayleigh beam subjected to a concentrated transverse impulse applied at a point far from the boundaries. For a simply supported finite beam struck at its midpoint, using the modal expansion of the impulse response, a short-time asymptotic series for the response of the struck point is derived. The infinite beam impulse response is obtained as a spectral integral in two ways. The spectral integral is evaluated exactly in terms of modified Bessel functions via Laplace transform calculations. The corresponding short- and long-time asymptotics of the exact integral are consistent with the power series developed earlier and the Euler-Bernoulli beam, respectively. Direct numerical evaluation of the integral with a pre-specified error bound and numerical contour integration is also presented for verification. An ad hoc approximation is given which matches the response well for all times. The relationship between finite and infinite beam responses is examined in some detail. There are three consequences of finite length. First, the coefficients in the power series expansion contain components that decay exponentially with increasing length of the beam. Second, a smooth deviation from the infinite beam response is observed, consistent with the greatest group velocity in the beam, wherein a small precursor is detected which is consistent with broader theory. Third, a slope discontinuity is observed, corresponding to the high-frequency limit of group velocity. The full time series plot from modal expansion satisfactorily shows both the arrival and passage of these high frequency components. This paper opens the door to impact studies that are envisaged in future work.

0.52

Extracting Single-Mode Rayleigh--Taylor Instability dynamics from data via SINDy

cs.LG physics.flu-dyn ·2026-11-05 ·Chuanxing Wang, Hui Luo, Guohuai Zhu, Hongbo Cai, Shaoping Zhu +1 more
similarity 0.47
Abstract

Rayleigh-Taylor instability (RTI) is of fundamental importance in fields such as inertial confinement fusion and supernova explosions, and its evolution is commonly described by potential--flow theory and buoyancy--drag models. However, both types of models struggle to accurately capture the overshoot behavior of bubble and spike velocities, as well as the subsequent reacceleration stage. To address these limitations, we develop a physics-constrained, data-driven framework based on the integral formulation of Sparse Identification of Nonlinear Dynamics (SINDy), which extracts low-dimensional dynamical equations for bubble and spike evolution directly from data. By introducing the nondimensional initial amplitude $A_0 = kη_0$ as an explicit parameter, we identify distinct dynamical equations for the bubble and the spike based on data spanning multiple Atwood numbers and initial amplitudes. The resulting low-dimensional dynamical equations not only reproduce the overshoot behavior of the velocity with good accuracy, but also capture the reacceleration stage well, while maintaining high predictive accuracy at unseen values of the wavenumber, acceleration, and Atwood number. This work provides a physics-constrained, data-driven framework complementary to conventional potential-flow and buoyancy--drag models, accurately describing the dynamical evolution of the bubble and spike at high Atwood numbers, and provides a new perspective for directly extracting the dynamical equations of interfacial instabilities from data.

0.26

Scalar Entropic Damage Transport: Well-posed softening with a single damage variable

cs.CE math.NA ·2026-11-13 ·Jonas Nutz, Vikram Laheri, Matti Schneider
similarity 0.46
Abstract · 42 pages, 15 figures. Submitted to Computer Methods in Applied Mechanics and Engineering

Entropic Damage Transport (EDT) represents material softening via a local continuum damage model while ensuring the well-posedness of the mechanical boundary value problem. It is based on a convexification of the time-incremental potential associated with a rate-limited scalar damage model. A one-dimensional distribution of damage states serves as the internal variable, and the number of these states grows with the number of time steps. We show that the emergence of the damage distribution is an artifact of the time discretization. Surprisingly, the distribution concentrates at a single damage state in the time-continuous limit, and EDT converges to a rate-limited damage model with a scalar damage variable, whose free energy is jointly convex in the strain and the reciprocal degradation. We exploit this hidden convexity by a frozen-metric discretization in terms of the reciprocal degradation, which renders every increment jointly convex. The resulting scalar update preserves damage irreversibility, the prescribed damage-rate limitation and thermomechanical consistency, reduces to a scalar equation and provides a symmetric and positive definite algorithmic tangent in closed form. Computational experiments assess the accuracy and the efficiency of both formulations from the material point to the microstructure level, and demonstrate that the scalar update permits a finite-element computation of industrial size with more than 14 million degrees of freedom.

0.54

Limitation of Bessel Beams in Near Field Communications: A Depth of Field Perspective

eess.SP ·2026-10-30 ·Aditya Jolly, Vitaly Petrov, Gábor Fodor, Emil Björnson
similarity 0.44
Abstract · Submitted to IEEE TCOM on 20th October 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be o…

Bessel beams have recently been explored as a candidate complement to focused beams in radiative near-field communications due to their non-diffracting and self-healing properties. However, recent work has shown that the practically useful range of finite-aperture Bessel beams can occupy only a fraction of the radiative near-field region, establishing the existence of a finite propagation limit. In this paper, we establish such a limitation analytically from a depth-of-field perspective for Bessel beams generated by finite circular and square apertures. To quantify the Bessel beam depth, we first derive analytical expressions for the normalized array gain and use them to establish absolute and peak-normalized $3$-dB depth-of-field criteria. These criteria reveal critical cone-angle thresholds that partition the Bessel-beam configuration space into (i) undefined, (ii) finite, and (iii) infinite depth-of-field regimes. Our analysis further reveals that the maximum usable non-diffracting range under the proposed depth-of-field criterion is limited to $\approx22\%$ and $\approx19\%$ of the Fraunhofer distance for circular and square apertures, respectively. Numerical results confirm the accuracy of the derived limits for discrete planar arrays, providing practical engineering guidelines for the design of finite-aperture Bessel beams in future near-field communications.

0.28

Repeated Binary Direct Collinear Impacts Under Incremental Contact Laws With Residual Indentation: A Hybrid Systems Formulation

eess.SY physics.class-ph ·2026-09-05 ·Mihails Milehins, Dan B. Marghitu
similarity 0.43
Abstract · 34 pages, 6 figures; v1-v7: a variety of amendments and corrections; v6-v7: further analytical properties

Incremental contact laws specify the normal contact force through a differential relation, possibly carrying an internal state, driven by the indentation and its rate. The force may vanish at a nonzero indentation, through plasticity, an elastic aftereffect, or, under some laws with a viscous component, a load drawing the bodies apart rapidly, leaving a residual deformation at separation. Such a deformation sits uneasily within rigid body dynamics, which admits none. The tension is tolerable when the indentation is small relative to the bodies, so that it may be carried constitutively rather than geometrically. Even then, the law alone does not determine the interaction: because force and indentation no longer vanish together, conditions for the commencement and termination of contact must be supplied separately, as must the fate of the deformation and internal state at separation, both absent from the equations of motion. This article formulates the repeated direct collinear impact of two convex bodies under external forces as a hybrid dynamical system. The contact interface is modeled as a massless element carrying the contact law and its state, coupled to the bodies through relative velocity and an interaction force dictated by the contact state. Consequently, all switching and resets are confined to the interface, leaving the geometry and equations of motion of the bodies unaltered. The principal analytical properties of the formulations are established, among them passivity and completeness; the branching of solutions at the onset and termination of contact is examined. The framework is demonstrated through numerical simulations.

0.29

A Differentiable Framework for Inverse Identification of Heterogeneous Cohesive Laws

cs.CE physics.comp-ph ·2026-10-24 ·Sida Hao, Jinkyo Han, Bahador Bahmani
similarity 0.43
Abstract

This work develops a differentiable finite element framework based on an intrinsic cohesive-zone formulation for identifying traction-separation laws from global force-displacement histories and spatially sparse strain measurements. The framework employs physics-constrained neural networks to represent flexible, thermodynamically structured cohesive laws, with sensitivities computed through automatic differentiation and a discrete adjoint that accounts for the history-dependent evolution of interfacial damage. To enable identification of spatially heterogeneous cohesive behavior, we extend learned constitutive priors to irreversible interfacial damage by constructing a shared, low-dimensional family of cohesive laws from representative traction-separation histories. This representation exploits common constitutive structure and parameter sharing to reduce the number of unknowns and regularize the inverse problem, while allowing local cohesive behavior to vary spatially through latent coordinates. Numerical investigations involving double-cantilever beams and fiber-matrix composites demonstrate that accurate reproduction of global force-displacement responses does not necessarily imply accurate recovery of the underlying cohesive laws. Incorporating spatially resolved strain measurements substantially improves constitutive identification, even when the admissible responses are constrained by a learned prior. Comparisons with conventional bilinear cohesive models and Bayesian optimization further illustrate the benefits of the learned constitutive representation and adjoint-based identification for high-dimensional inverse problems.

0.20

A space-time finite element formulation for geometrically exact shear-deformable beams

cs.CE math.NA ·2026-10-02 ·Ivo Steinbrecher, Alexander Humer
similarity 0.42
Abstract

We present a space-time finite element formulation for the transient analysis of geometrically exact shear-deformable beams. The formulation treats space and time within a unified finite element framework and employs a mixed approach in which translational and angular velocities are introduced as independent fields. The rotation field is parametrized using nodal rotation (pseudo-)vectors and a suitable objective interpolation of the triad field is employed. The resulting formulation supports generally curved beam structures, including geometric kinks and rigid joints. Furthermore, time-dependent material domains can be represented directly through the geometry of the space-time surface, enabling the treatment of non-material boundaries without modifying the underlying beam formulation. Numerical examples demonstrate convergence to solutions obtained with classical time-stepping schemes, objectivity of the formulation, and the influence of the space-time stabilization. Finally, the sliding spaghetti problem illustrates the applicability of the proposed approach to axially moving continua.

0.19

A Tutorial on Complementarity-Based Contact Models for Robotics

cs.RO cs.GRmath.OC ·2026-11-19 ·Onur Beker, A. René Geist, Michael Posa, Marc Toussaint, Justin Carpentier +1 more
similarity 0.41
Abstract · 32 pages, 9 figures, 3 tables, 14 algorithms

Simulating rigid-body dynamics with contact is fundamental to robotics, from motion synthesis and control to mechanism design. Many widely used simulators rely on cone complementarity formulations, whose physical assumptions and numerical solution require substantial background. While excellent surveys, monographs, and course notes exist, they mostly address computational mechanics or computer graphics or document a single simulator. To the best of our knowledge, a self-contained pedagogical treatment for robotics, bringing these formulations and their solvers together with complete derivations and a unified notation, does not yet exist. This tutorial addresses this gap by connecting rigid-body dynamics, conic optimization, and frictional contact. In particular, we explain how complementarity conditions encode non-penetration and frictional dissipation, determining separation, sticking, and sliding without prescribed contact modes. We distinguish equivalent transcriptions from convex relaxations, showing how the latter can introduce artifacts such as lift-off and creep. We examine the existence and uniqueness of motion and contact forces, including the solver's role in selecting among multiple solutions. We then compare first-order and Newton-based methods, explain regularization and proximal strategies, and discuss trade-offs between computational cost, robustness, and physical fidelity. Connections to widely used simulators, optimal control, and differentiable simulation help readers interpret simulation results, choose suitable formulations and solvers, and develop their own contact dynamics routines.

0.23