CS Paper Radar

Transverse impulse response of finite and infinite Rayleigh beams

Saranya Biswas, Anindya Chatterjee

cs.CE ·submitted 2026-10-14 11:04 UTC · v2
unusual

Abstract

Here, we study an undamped Rayleigh beam subjected to a concentrated transverse impulse applied at a point far from the boundaries. For a simply supported finite beam struck at its midpoint, using the modal expansion of the impulse response, a short-time asymptotic series for the response of the struck point is derived. The infinite beam impulse response is obtained as a spectral integral in two ways. The spectral integral is evaluated exactly in terms of modified Bessel functions via Laplace transform calculations. The corresponding short- and long-time asymptotics of the exact integral are consistent with the power series developed earlier and the Euler-Bernoulli beam, respectively. Direct numerical evaluation of the integral with a pre-specified error bound and numerical contour integration is also presented for verification. An ad hoc approximation is given which matches the response well for all times. The relationship between finite and infinite beam responses is examined in some detail. There are three consequences of finite length. First, the coefficients in the power series expansion contain components that decay exponentially with increasing length of the beam. Second, a smooth deviation from the infinite beam response is observed, consistent with the greatest group velocity in the beam, wherein a small precursor is detected which is consistent with broader theory. Third, a slope discontinuity is observed, corresponding to the high-frequency limit of group velocity. The full time series plot from modal expansion satisfactorily shows both the arrival and passage of these high frequency components. This paper opens the door to impact studies that are envisaged in future work.

Closest papers

Nearest neighbours by meaning across the whole index.

Transverse impact of a Hertzian sphere with an infinite Rayleigh beam

cs.CE ·2026-11-12 ·Saranya Biswas, Anindya Chatterjee
similarity 0.66
Abstract

We study the impact of a Hertzian sphere on an infinite Rayleigh beam, which presents both interesting possibilities for numerical approximation as well as new insights in the multiple-contact-event regime. Here, Galerkin projection using an abstract continuous variable replaces the history-dependent convolution in the impact equations by a system of local-in-time ordinary differential equations. The corresponding approximate solutions are validated against direct numerical solution of the convolution-based formulation and show agreement. Unlike the corresponding Euler-Bernoulli beam impact problem, which is governed by a single nondimensional parameter, the Rayleigh beam impact dynamics is governed by two nondimensional parameters. A parametric study reveals three distinct impact regimes: one regime with a single contact followed by permanent separation, a second regime with a single contact that is sustained thereafter, and an intervening regime with initial separation followed by multiple contact events with diminishing amplitudes, leading eventually to sustained contact. Short- and long-time asymptotic analyses are used to characterize the boundaries between the permanent separation and the re-contact regimes in different parameter regimes. The three significant new aspects of this paper are the system itself (Rayleigh beam instead of Euler Bernoulli beam), the model order reduction achieved through Galerkin projection in an abstract domain, and the detailed parametric study leading to a simple qualitative picture of possible behaviours.

0.23

Limitation of Bessel Beams in Near Field Communications: A Depth of Field Perspective

eess.SP ·2026-10-30 ·Aditya Jolly, Vitaly Petrov, Gábor Fodor, Emil Björnson
similarity 0.57
Abstract · Submitted to IEEE TCOM on 20th October 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be o…

Bessel beams have recently been explored as a candidate complement to focused beams in radiative near-field communications due to their non-diffracting and self-healing properties. However, recent work has shown that the practically useful range of finite-aperture Bessel beams can occupy only a fraction of the radiative near-field region, establishing the existence of a finite propagation limit. In this paper, we establish such a limitation analytically from a depth-of-field perspective for Bessel beams generated by finite circular and square apertures. To quantify the Bessel beam depth, we first derive analytical expressions for the normalized array gain and use them to establish absolute and peak-normalized $3$-dB depth-of-field criteria. These criteria reveal critical cone-angle thresholds that partition the Bessel-beam configuration space into (i) undefined, (ii) finite, and (iii) infinite depth-of-field regimes. Our analysis further reveals that the maximum usable non-diffracting range under the proposed depth-of-field criterion is limited to $\approx22\%$ and $\approx19\%$ of the Fraunhofer distance for circular and square apertures, respectively. Numerical results confirm the accuracy of the derived limits for discrete planar arrays, providing practical engineering guidelines for the design of finite-aperture Bessel beams in future near-field communications.

0.28

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

eess.SP ·2026-08-13 ·Georg Schwan, Alexander Stutz-Tirri, Christoph Studer
positioncode/data similarity 0.48
Abstract · Submitted to a journal

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

0.51

Empirical Analysis of Near-Field Beam Shaping for Blockage Events

eess.SP ·2026-09-23 ·Jy-Chin Liao, Volodymyr Vizitiv, Edward W. Knightly
similarity 0.46
Abstract · 12 pages, 10 figures, 1 table. Submitted to IEEE Transactions on Wireless Communications

Millimeter-wave (mmWave) to sub-terahertz (sub-THz) links can realize high data rates, yet are highly vulnerable to dynamic blockages due to high directivity, limited multipath, and dependence on line-of-sight (LoS) propagation. While structured and self-healing beams are promising solutions, it remains unclear how beam types perform under dynamic blockage. In this paper, we present an empirical analysis of structured near-field beams using two transmission policies. At one extreme, we study beam resilience without obstacle adaptation. At the other extreme, we empirically optimize beam parameters to study the limits of multiple beam types under idealized adaptation. We employ numerical analysis based on the angular spectrum method (ASM) and experimental validation using a sub-THz time-domain spectroscopy (TDS) platform to characterize beam performance over complete blockage events. For the scenarios considered, despite lacking self-healing, focused beams provide the strongest resilience when beam parameters are not adapted during a blockage event (i.e., when all beams are optimized only a priori). In contrast, when optimally adapted to obstacle position, curved beams provide the best performance. Lastly, although Bessel beams benefit from self-healing, this property alone can be insufficient to outperform optimized curved and focused beams. These findings provide guidance for blockage-aware beam selection and adaptation protocols.

0.27

Beamfocusing Versus Airy Beams: Does Antenna Blockage Require Beam Bending?

eess.SP cs.IT ·2026-10-20 ·Emil Björnson, Vitaly Petrov, Erik G. Larsson
theory similarity 0.45
Abstract · 5 pages, 2 figures, submitted for review

Airy beams are often proposed in array beamforming to bend beams around obstacles. We prove that, for a single-antenna receiver, conventional beamfocusing maximizes the received power regardless of how many antennas are blocked and, in expectation, even with phase errors in the channel state information. This also holds for multi-antenna receivers under a phase-separability condition that is satisfied in rank-one channels. Numerical results confirm that unmodified beamfocusing is optimal for physically small receivers (i.e., those that fit within the beamwidth) when an obstacle is present. For physically larger receivers, the optimal precoding deviates from beamfocusing to better illuminate the receiver's unobstructed parts, but will not become Airy beams. While Airy beams can be configured to perform well, their ability to follow a bent trajectory in front of an obstacle does not maximize the received power behind it.

0.13

Impulse Response Estimation via Laguerre-Fourier Expansion

eess.SP math.CVmath.DS ·2026-08-14 ·Tamás Dózsa, Art J. R. Pelling, Matthias Voigt
similarity 0.44
Abstract

The empirical transfer function estimate (ETFE) is a widely used method for system identification of linear time-invariant (LTI) systems in engineering disciplines such as acoustics, audio engineering, seismography, and tomography. However, ETFE suffers from numerical limitations when the excitation signal is band-limited or vanishes at certain frequencies, which is a common physical constraint of the excitation in practice. In such cases, division in the frequency domain becomes heavily ill-conditioned, and small measurement disturbances or numerical inaccuracies can degrade the solution. This paper presents L-ETFE, a generalization of ETFE based on Laguerre-Fourier expansions that addresses these limitations. After a suitable transformation, the method can yield a well-conditioned circulant problem even when the original ETFE system is ill-conditioned. Solving this problem via classical ETFE yields the discrete Laguerre-Fourier coefficients of the system's transfer function. The desired impulse response (IR) of the system-to-be-identified can then be recovered by a subsequent transformation pipeline. We derive novel and efficient algorithms for performing these transformations and analyse the conditioning of the transformed problem, explicitly characterizing its dependence on the input and a parameter used in the Laguerre-Fourier expansion. We evaluate the method on two simulated discrete-time LTI systems of varying complexity. The experiments demonstrate accurate IR recovery for spectral-zero and band-limited excitation, where standard ETFE fails.

0.04

From Multimode Near-Field Coupling to Friis

eess.SP physics.class-ph ·2026-09-16 ·Mats Gustafsson
similarity 0.42
Abstract

Near-field propagation between finite apertures can support multiple spatial channels, while far-field transmission is effectively single mode and follows the Friis transmission formula. This letter establishes a direct connection between these two regimes through the mutual shadow area between the transmitting and receiving apertures. The mutual shadow determines the asymptotic number of spatial degrees of freedom and, in the paraxial regime, leads to a simple beamforming distance that provides a characteristic scale for the transition from multimode to effectively single-mode propagation. The channel singular-value sum rule further shows that, below this distance, increasing separation primarily reduces the number of supported spatial channels while their average normalized strength remains approximately constant. Beyond the transition, the remaining channel strength decreases according to the conventional free-space quadratic power law, recovering the Friis transmission formula. Numerical results for circular apertures demonstrate the transition, the scaling with aperture size, and the dependence on the transmitter and receiver apertures. The mutual-shadow formulation also extends the description beyond the paraxial regime.

0.23

Analytical Characterization of Radial Resolution at Oblique Angles for Near-Field Communications

eess.SP ·2026-11-11 ·Viviana Centritto, Sotiris Droulias, Angeliki Alexiou
theory similarity 0.42
Abstract · 6 pages, 8 figures

Exploiting radial resolvability in near-field communications requires analytical expressions that directly map physical beam parameters to resolution-controllable focal regions. However, beam characterization at oblique angles produces complex algebraic expressions that mask these critical interactions. In this work, we introduce an electromagnetic-aware analytical model built upon a tight upper bound of the spatial power density. This approach yields compact, closed-form solutions for the peak intensity position and radial focal extent, enabling the design of contiguous multi-user focal regions with controlled radial resolution. Performance evaluations confirm that the framework closely tracks exact solutions while facilitating system dimensioning and inter-beam interference management across varying steering angles.

0.17