CS Paper Radar

Impulse Response Estimation via Laguerre-Fourier Expansion

Tamás Dózsa, Art J. R. Pelling, Matthias Voigt

eess.SP math.CVmath.DS ·submitted 2026-08-14 14:20 UTC · v2

Abstract

The empirical transfer function estimate (ETFE) is a widely used method for system identification of linear time-invariant (LTI) systems in engineering disciplines such as acoustics, audio engineering, seismography, and tomography. However, ETFE suffers from numerical limitations when the excitation signal is band-limited or vanishes at certain frequencies, which is a common physical constraint of the excitation in practice. In such cases, division in the frequency domain becomes heavily ill-conditioned, and small measurement disturbances or numerical inaccuracies can degrade the solution. This paper presents L-ETFE, a generalization of ETFE based on Laguerre-Fourier expansions that addresses these limitations. After a suitable transformation, the method can yield a well-conditioned circulant problem even when the original ETFE system is ill-conditioned. Solving this problem via classical ETFE yields the discrete Laguerre-Fourier coefficients of the system's transfer function. The desired impulse response (IR) of the system-to-be-identified can then be recovered by a subsequent transformation pipeline. We derive novel and efficient algorithms for performing these transformations and analyse the conditioning of the transformed problem, explicitly characterizing its dependence on the input and a parameter used in the Laguerre-Fourier expansion. We evaluate the method on two simulated discrete-time LTI systems of varying complexity. The experiments demonstrate accurate IR recovery for spectral-zero and band-limited excitation, where standard ETFE fails.

Closest papers

Nearest neighbours by meaning across the whole index.

Multichannel Sampling and Reconstruction in Multidimensional Shift-Invariant Spaces

eess.SP ·2026-10-26 ·Riya Ghosh, Satish Mulleti, Chandra Sekhar Seelamantula
unusual similarity 0.51
Abstract

We develop a multichannel sampling and reconstruction framework for multidimensional principal shift-invariant spaces based on a finite-dimensional polyphase representation. Periodic nonuniform shifts and derivative measurements are modeled as analysis channels, leading to a frequency-domain linear system relating the measurements to the polyphase components of the underlying coefficient sequence. Stable recovery is characterized through uniform singular-value bounds on the associated polyphase matrix, and explicit synthesis kernels are obtained from its Moore Penrose left inverse. The formulation applies to both separable and genuinely non-separable generators and includes several classical one dimensional sampling formulas as special cases. For irregular derivative measurements, where the periodic polyphase structure is no longer directly available, we develop an iterative reconstruction method based on local bivariate Hermite interpolation followed by orthogonal projection onto the shift-invariant space. A sufficient contraction condition is derived to guarantee geometric convergence of the iteration. Numerical experiments demonstrate the reconstruction performance for separable and non-separable generators and illustrate robustness to additive measurement noise and sampling-location perturbations.

0.30

High-Order Sinusoidal Modeling for Precise Parameter Refinement

eess.SP eess.AS ·2026-10-15 ·Shaowen Chen, Tomoki Toda
unusual similarity 0.50
Abstract · This manuscript is currently under review for publication in the IEEE Transactions on Signal Processing. This work has been submitted to the…

Although the amplitude estimation of sinusoids is a linear and tractable problem when their frequencies are known, the accuracy of signal modeling is fundamentally limited by the inevitable frequency mismatches produced by existing methods. Quasi-harmonic modeling (QHM) and its extensions (aQHM and eaQHM) offer the ability to refine frequency estimates while extracting amplitudes; however, their extraction and correction capabilities remain limited. In this paper, we first revisit QHM methods from the perspective of frequency mismatches, and reveal that their performances are essentially constrained by the order of the model. Specifically, QHM methods are linear models and thus incapable of capturing higher-order frequency variations, leading to suboptimal modeling accuracy. Second, to address this limitation, we propose a higher-order modeling framework that enables more precise approximation of signal components. Eventually, we qualitatively characterize the optimization problem and employ the Levenberg--Marquardt (LM) algorithm for parameter estimation. As a result, the proposed method allows for significantly improved estimation of amplitudes, frequencies, and phases of sinusoidal components, enabling more accurate signal modeling. Experiments on both simulation study and speech signals demonstrate the superiority of the high-order model in frequency refinement and parameter extraction and its robustness under additive noise conditions.

0.24

Distributionally Robust Frequency Response Estimation Using Non-Steady-State Frequency-Domain Data

eess.SY ·2026-10-07 ·Stefan Damjanovic, John W. Simpson-Porco, Klaske van Heusden
theory similarity 0.50
Abstract

This paper develops a distributionally robust optimization (DRO) framework for identifying the frequency response function (FRF) of an unknown linear time-invariant system from repeated noisy non-steady-state input-output measurements. Building on a recent frequency-domain extension of Willems' fundamental lemma, we formulate FRF estimation as a DRO problem, wherein robustness is desired with respect to the unknown probability distribution generating the noisy data. The proposed estimator computes FRF estimates by minimizing a convex upper bound on the DRO cost and allows for frequency-dependent calibration of the Wasserstein metric; the tractable upper bound consists of an empirical fit and a regularizer that penalizes the largest weighted sensitivity to spectral perturbations. Under suitable assumptions, we prove that the FRF estimation error is upper bounded by the optimal value of the DRO problem. The method is validated via a simple numerical study, which demonstrates improved performance under severely heavy-tailed noise.

0.44

Physics-Informed Sinusoidal Representation Networks for Damage Identification in Ultrasonic Guided Wave Structural Health Monitoring

cs.CE cs.LG ·2026-11-09 ·Lukas Jilke, Caspar Wasle, Norbert Hosters, Florian Raddatz, Marek Behr +1 more
similarity 0.50
Abstract · 19 pages, 12 figures, 6 tables

Ultrasonic guided wave (UGW) inspection has become an effective method in structural health monitoring (SHM). While machine learning has enhanced damage detection capabilities, purely data-driven models remain constrained by extensive labeled datasets and limited physical interpretability. Standard multi-layer perceptrons (MLPs) further suffer from spectral bias (F-Principle) in high-frequency regimes, prioritizing low-frequency components while failing to resolve the high-frequency oscillations critical for UGW reconstruction. Physics-Informed Sinusoidal Representation Networks (PI-SIRENs) address these limitations by embedding governing partial differential equations directly into the training process. Building upon SIRENs, which utilize periodic activation functions to inherently capture high-frequency spectral content, the proposed framework is designed to operate effectively in sparse ultrasonic measurement regimes. This work introduces a frequency-domain PI-SIREN framework tailored for the Mindlin-Reissner plate theory to reconstruct ultrasonic wavefields without temporal discretization. The model parameters are optimized using a hybrid strategy comprising three phases: first-order Adam, residual-adaptive refinement (RAR) and quasi-Newton L-BFGS. Numerical and experimental evaluations confirm that the model serves as a physics-consistent baseline derived from sparse data, functioning as a computationally efficient surrogate for damage identification in SHM and non-destructive testing (NDT). Integrating the surrogate into a damage identification pipeline detects and localizes a milled notch from sparse experimental measurements with a localization error of 1 % of the plate diagonal. In contrast, data-driven benchmarks and MLPs with hyperbolic tangent activation functions, with and without Fourier feature embedding, are unable to identify damage due to higher reconstruction errors.

0.32

Applying the Spectral Method for Modeling Linear Filters: Bessel, Papoulis, and Legendre Filters

eess.SP eess.SYmath.NA ·2026-08-20 ·Konstantin A. Rybakov
similarity 0.49
Abstract

This paper proposes a new technique for computer simulation of linear filters. It allows simulating continuous-time linear filters based on the spectral method for analyzing linear control systems. Applying the spectral method implies that the input and output signals are represented by ordered sets of expansion coefficients in a chosen basis, and the filter itself is specified by a two-dimensional nonstationary transfer function. The described technique is tested on Bessel, Papoulis, and Legendre filters of various orders. For each filter, the corresponding two-dimensional nonstationary transfer function, i.e., the matrix of the linear transformation relating expansion coefficients of the input and output signals, is obtained.

0.25

Acoustic Image Source Interpolation with Optimal Transport Barycenter

eess.AS eess.SP ·2026-09-14 ·Yuyang Liu, Rumeshika Pallewela, Jesper Brunnström, Isabel Haasler, Filip Elvander
similarity 0.48
Abstract · Submitted to ICAASP 2027

Room impulse responses can be estimated via the image source model (ISM) using the image source point cloud (ISPC) of a physical source. However, because the source movement changes the ISPC, estimating the ISPC at a new source position typically requires repeated acoustic measurements. We propose an optimal transport (OT) barycenter framework to interpolate the ISPC of a new source location from ISPCs of known sources. The method jointly estimates image-source associations and the ISPC at the new location. The OT ground cost exploits the property that the image sources undergo the same displacement as their physical sources. This approach is realized for both grid-based and support-free configurations. The support-free method addresses the resulting nonconvex joint estimation problem by alternating between identifying image-source associations across the ISPCs and refining the target image-source locations. This enables the interpolation of ISPCs without repeated measurements, facilitating efficient and flexible room-acoustic modeling.

0.39

Spherical Harmonic Sliced Wasserstein Displacement Interpolation for Acoustic Source and Reflection Density Modeling

cs.SD eess.ASeess.SPmath.OC+1 ·2026-09-18 ·Yuancheng Luo
similarity 0.48
Abstract · Submitted to ICASSP 2027

Spatial room impulse responses (SRIRs) capture directional distributions of acoustic sound-sources and their reflections. However, collecting SRIRs of moving sound-sources remains a challenge, requiring complex interpolations across measurements that account for multi-path spatial-temporal dynamics. This paper investigates the Wasserstein metric and displacement for evaluating interpolated SRIR echo densities in the spherical harmonic domain. We present novel sum-of-magnitude square expansions for efficiently fitting probability density functions, maximizing likelihood, inverse sampling, and computing spherical sliced Wasserstein interpolations. Experiments compare the Wasserstein displacements and metric to linear and geometric interpolations of SRIR image-source densities on a line-path, and demonstrate model-order reduction.

0.33

Identification of $dq$-Asymmetric Impedances as Complex Transfer Functions Using a Single Arbitrary Excitation

eess.SP eess.SY ·2026-08-30 ·Mohamed Abdalmoaty, Zheran Zeng, Dongsheng Yang, Florian Dörfler
similarity 0.48
Abstract

Cross-coupling between the $dq$ coordinates makes the identification of asymmetric grid impedances a challenging problem, particularly near the fundamental frequency where the asymmetric coupling is strongest. Existing schemes usually handle it either by perturbing the two coordinates sequentially, which lengthens the measurement, or by using a time-domain method with a global parametric model whose order must be tuned. This paper develops a single-shot active non-parametric frequency-domain method that avoids both. The equivalent impedance is parameterized by a pair of single-input single-output complex transfer functions. Each spectral line is fitted with a local rational model; the leakage and transient contributions are estimated, so that neither periodic steady-state excitation nor repeated excitation cycles are required. We give the exact finite-time discrete Fourier transform relation for the conjugate-coupled complex-signal model, and analyse the distortion that a stationary-frame filter placed ahead of the Park transform imposes on the identified pair. The method is validated on a controller hardware-in-the-loop platform against an analytically derived small-signal model, for a symmetric grid and for the same grid with an added grid-following converter that renders it asymmetric. Both complex transfer functions and all four real transfer functions of the $dq$ impedance are recovered over a wide band from a single one-second record of a random excitation, at 1 Hz resolution.

0.26