CS Paper Radar

Applying the Spectral Method for Modeling Linear Filters: Bessel, Papoulis, and Legendre Filters

Konstantin A. Rybakov

eess.SP eess.SYmath.NA ·submitted 2026-08-20 09:40 UTC · v1

Abstract

This paper proposes a new technique for computer simulation of linear filters. It allows simulating continuous-time linear filters based on the spectral method for analyzing linear control systems. Applying the spectral method implies that the input and output signals are represented by ordered sets of expansion coefficients in a chosen basis, and the filter itself is specified by a two-dimensional nonstationary transfer function. The described technique is tested on Bessel, Papoulis, and Legendre filters of various orders. For each filter, the corresponding two-dimensional nonstationary transfer function, i.e., the matrix of the linear transformation relating expansion coefficients of the input and output signals, is obtained.

Closest papers

Nearest neighbours by meaning across the whole index.

Impulse Response Estimation via Laguerre-Fourier Expansion

eess.SP math.CVmath.DS ·2026-08-14 ·Tamás Dózsa, Art J. R. Pelling, Matthias Voigt
similarity 0.49
Abstract

The empirical transfer function estimate (ETFE) is a widely used method for system identification of linear time-invariant (LTI) systems in engineering disciplines such as acoustics, audio engineering, seismography, and tomography. However, ETFE suffers from numerical limitations when the excitation signal is band-limited or vanishes at certain frequencies, which is a common physical constraint of the excitation in practice. In such cases, division in the frequency domain becomes heavily ill-conditioned, and small measurement disturbances or numerical inaccuracies can degrade the solution. This paper presents L-ETFE, a generalization of ETFE based on Laguerre-Fourier expansions that addresses these limitations. After a suitable transformation, the method can yield a well-conditioned circulant problem even when the original ETFE system is ill-conditioned. Solving this problem via classical ETFE yields the discrete Laguerre-Fourier coefficients of the system's transfer function. The desired impulse response (IR) of the system-to-be-identified can then be recovered by a subsequent transformation pipeline. We derive novel and efficient algorithms for performing these transformations and analyse the conditioning of the transformed problem, explicitly characterizing its dependence on the input and a parameter used in the Laguerre-Fourier expansion. We evaluate the method on two simulated discrete-time LTI systems of varying complexity. The experiments demonstrate accurate IR recovery for spectral-zero and band-limited excitation, where standard ETFE fails.

0.04

Identification of $dq$-Asymmetric Impedances as Complex Transfer Functions Using a Single Arbitrary Excitation

eess.SP eess.SY ·2026-08-30 ·Mohamed Abdalmoaty, Zheran Zeng, Dongsheng Yang, Florian Dörfler
similarity 0.48
Abstract

Cross-coupling between the $dq$ coordinates makes the identification of asymmetric grid impedances a challenging problem, particularly near the fundamental frequency where the asymmetric coupling is strongest. Existing schemes usually handle it either by perturbing the two coordinates sequentially, which lengthens the measurement, or by using a time-domain method with a global parametric model whose order must be tuned. This paper develops a single-shot active non-parametric frequency-domain method that avoids both. The equivalent impedance is parameterized by a pair of single-input single-output complex transfer functions. Each spectral line is fitted with a local rational model; the leakage and transient contributions are estimated, so that neither periodic steady-state excitation nor repeated excitation cycles are required. We give the exact finite-time discrete Fourier transform relation for the conjugate-coupled complex-signal model, and analyse the distortion that a stationary-frame filter placed ahead of the Park transform imposes on the identified pair. The method is validated on a controller hardware-in-the-loop platform against an analytically derived small-signal model, for a symmetric grid and for the same grid with an added grid-following converter that renders it asymmetric. Both complex transfer functions and all four real transfer functions of the $dq$ impedance are recovered over a wide band from a single one-second record of a random excitation, at 1 Hz resolution.

0.26

Computing Scaled Relative Graphs of Discrete-Time LTI Systems: A Frequency-Domain Approach

eess.SY ·2026-09-29 ·Guoming Shi, Fredy Ruiz
similarity 0.46
Abstract

The scaled relative graph (SRG) represents the joint gain and phase properties of an input--output operator in the complex plane. This paper characterizes the SRG closure of causal, stable, square discrete-time linear time-invariant (LTI) systems on one-sided square-summable sequences. The Beltrami--Klein image of this closure equals the convex hull of the numerical ranges of the transformed frequency-response matrices. For real-coefficient single-input single-output systems, this yields the hyperbolic convex hull of the discrete-time Nyquist locus. The proof addresses the Hardy-space restriction imposed by one-sided inputs, which excludes persistent sinusoids, by replacing them with explicitly constructed finite-duration sinusoids. This construction shows how points in frequency-wise SRGs arise as limits of operator SRG points generated by admissible inputs. The characterization enables model-based computation of the closure from a state-space realization using frequency-response evaluations, numerical ranges, and planar convex hulls, without solving linear matrix inequalities.

0.51

Data-driven model reduction: An identification perspective using Generalized Bases of Orthonormal Functions

eess.SY ·2026-11-17 ·Bernard Vau, Henri Bourlès
similarity 0.45
Abstract

This paper proposes a data-driven model order reduction approach based on system identification concepts. A revised equation error formulation is introduced, in which the model is parameterized using Generalized Bases of Orthonormal Transfer Functions (GBOFs). The generalized reduction problem is formulated in the Hambo frequency domain associated with the GBOF transform. The frequency-domain fit of the reduced-order model is adjusted through the selection of the basis poles. A fit indicator depending on these poles is introduced, providing valuable heuristic guidance for their selection.

0.27

Optimal Linear Filtering of Markov Jump Systems

eess.SY ·2026-10-25 ·Wei Liu
similarity 0.44
Abstract

This paper deals with the optimal state estimation problem for discrete-time Markov jump linear systems in the sense of linear minimum mean-square error where the noises corrupting the system are mode-dependent and need not be Gaussian. An orthogonal projection extension-based equation (OPEBE) is established, which can decompose a random vector into several parts where the random vector contains conditional expectation of another random vector. Using the OPEBE and some results obtained in this paper, an optimal linear filter for the system under consideration is proposed. The computational and storage load of the proposed filter does not increase with time. Also, the proposed filter is finite-dimensionally computable and has a recursive structure. Computer simulations are provided to verify the effectiveness and performance of the proposed optimal linear filter.

0.22

Bias-Compensated Complex-Valued Bilinear Filtering

eess.SP ·2026-09-29 ·Bernhard Plaimer, Andreas Meingassner-Lang, Yannis Kowalewski, Matthias Wagner, Oliver Lang +1 more
unusual similarity 0.43
Abstract · 20 pages, 10 figures

Complex-valued optimal and adaptive filters are widely used to identify unknown systems in a broad range of practical applications. Recently, a number of complex-valued bilinear filters, such as the complex-valued bilinear Wiener filter (C-BWF), and the complex-valued bilinear least mean squares (C-BLMS) filter, have been proposed to model and identify complex-valued systems, which are bilinear with respect to their coefficients. However, if the input signals are contaminated with noise, the performance of these complex-valued bilinear filters degrades significantly due to an additional noise-induced bias. To overcome this issue, we propose novel bias-compensated complex-valued bilinear filters that estimate and account for input-noise statistics. Specifically, a bias-compensated C-BWF and a bias-compensated C-BLMS filter are derived in this work. We further include a convergence analysis for the latter. Since practical applications require knowledge of the input-noise variance, we briefly present an adapted method from literature to estimate this quantity. Finally, simulation results demonstrate the superior performance of the proposed filters compared to their standard (non-bias-compensated) counterparts and several state-of-the-art methods.

0.30

Gaussian-trigonometric functional link artificial neural network: design and analysis

eess.SP ·2026-09-13 ·Jie Wang, Lu Lu, Yi Yu, Xiaodong Li, Chengshi Zheng +1 more
top venueunusual similarity 0.43
Abstract · 16 pages, 9 figures

This paper proposes a Gaussian function-based trigonometric functional link artificial neural network (GTFLN) filter for linear-in-the-parameters nonlinear filtering. Compared with the adaptive exponential TFLN (AETFLN) filter, the GTFLN filter provides smooth and localized basis functions with reduced computational complexity, where modeling advantages are theoretically established through the smoothness, reproducing kernel Hilbert space, approximation error, and operator theory properties. To maximize the modeling performance, an optimized scaling parameter for the GTFLN filter is derived, yielding the optimized GTFLN (OGTFLN) filter. Least mean square (LMS) adaptation is applied to the GTFLN and OGTFLN filters for nonlinear system identification, resulting in the GTFLMS and OGTFLMS algorithms, respectively. Moreover, the theoretical steady-state excess mean-square error of the GTFLN filter is analyzed. Simulations validate the effectiveness of the theoretical analysis and demonstrate the improved performance of the GTFLN and OGTFLN filters over the linear-in-the-parameters benchmarks in nonlinear system identification and nonlinear acoustic echo cancellation. Based on the GTFLN filter, the filtered-g LMS (FgLMS) algorithm is proposed for nonlinear active noise control. Simulations demonstrate improved stability and noise reduction performance compared to the benchmarks.

0.46

Stable Rational Approximation of PDE Transfer Functions with $H_\infty$ Error Bounds

eess.SY math.AP ·2026-10-06 ·Aleksandr Talitckii, Matthew M. Peet
unusual similarity 0.43
Abstract

Transfer functions of Partial Differential Equations (PDEs) are irrational and difficult to obtain. Unlike for rational transfer functions, only a few methods are available for the control and analysis of irrational transfer functions. Thus, for robust analysis and control of PDEs, we need to use a rational approximation of the transfer function, preferably with provable $H_\infty$ error bounds. In this paper, we extend Krylov subspace model reduction to infinite-dimensional systems modeled by Partial Integral Equations (PIEs) -- an equivalent representation of PDEs. First, we propose a state transformation of the PIE system that allows us to compute a controllability matrix. Then, to obtain a rational approximation, we project the PIE states onto the vector space spanned by the truncated controllability matrix. Next, we show that sufficient conditions for exponential stability and well-posedness of the PIE system guarantee the exponential stability of the reduced-order system and provide constructive finite-frequency $H_\infty$ error bounds. Finally, we provide four illustrative numerical examples to demonstrate the performance of the proposed method.

0.25