CS Paper Radar

Data-driven model reduction: An identification perspective using Generalized Bases of Orthonormal Functions

Bernard Vau, Henri Bourlès

eess.SY ·submitted 2026-11-17 08:06 UTC · v1

Abstract

This paper proposes a data-driven model order reduction approach based on system identification concepts. A revised equation error formulation is introduced, in which the model is parameterized using Generalized Bases of Orthonormal Transfer Functions (GBOFs). The generalized reduction problem is formulated in the Hambo frequency domain associated with the GBOF transform. The frequency-domain fit of the reduced-order model is adjusted through the selection of the basis poles. A fit indicator depending on these poles is introduced, providing valuable heuristic guidance for their selection.

Closest papers

Nearest neighbours by meaning across the whole index.

An Analytical Review of Model Order Reduction Methodologies of Converter-Dominated Power Systems for Stability Studies

eess.SY ·2026-10-02 ·Goran Grdenić, Marco Fraccaro, Josipa-Pina Milišić
similarity 0.56
Abstract · 53 pages, 4 figures

The rapid integration of renewable energy sources is transforming modern electric power systems into converter-dominated networks characterized by complex multi-timescale dynamics and new stability interactions over a wide frequency range. Accurate analysis of these phenomena requires high-fidelity models of transmission networks and power electronic converters, which often result in large-scale differential-algebraic systems with significant computational burden. This paper provides an analytical review of model order reduction techniques for converter-rich power systems, with particular emphasis on the key equations employed in the reduction process. Advantages and limitations of commonly used strategies, including timescale-based singular perturbation, projection-based, operator-based, data-driven, and machine-learning based methods, are discussed. The synthesis highlights key challenges related to harmonic interactions and multi-frequency dynamics, and outlines directions for the development of computationally efficient yet dynamically accurate reduced-order models for future power systems.

0.29

Norm-optimal model order reduction in reproducing kernel Hilbert spaces

cs.LG math.NAeess.SY ·2026-10-20 ·Tamás Dózsa, Andrea Angino, Rolf Krause, Matthias Voigt
theory similarity 0.51
Abstract · 92 pages, 7 figures

We consider the problem of model order reduction (MOR) in reproducing kernel Hilbert spaces (RKHSs). We prove generalizations of well-known necessary interpolatory conditions for norm-optimal reduced-order models, originally stated for rational functions in $H_2$ Hardy-Hilbert spaces. We construct an alternative to the iterative rational Krylov (IRKA) algorithm for RKHSs with differentiable kernels to obtain norm-optimal reduced-order models. Then, we introduce generalized Malmquist-Takenaka (GMT) functions that can be used to define orthonormal bases in an arbitrary RKHS. Using GMT functions, we propose unitary transformations between separable RKHSs. This allows us to extend our optimality conditions and subsequent algorithms to MOR problems posed in RKHSs with non-differentiable kernels. The potential and versatility of the proposed MOR framework is demonstrated in several numerical experiments. We perform norm-optimal MOR on various machine learning models such as support vector machines and deep ReLU networks. In addition, we show how the proposed MOR framework can be used to solve seemingly unrelated problems. In particular, we provide an example for fitting high degree polynomials to data and also obtain a FEM-like method for solving partial differential equations (PDEs) with an optimal kernel basis.

0.33

Isostable-Based Nonlinear Model Reduction for Power System Oscillations

eess.SY math.DS ·2026-09-27 ·Kaiyang Huang, Dan Wilson, Kai Sun
similarity 0.48
Abstract

Power systems are often represented by high-dimensional dynamic models, making nonlinear control design computationally expensive and limiting its practical application. Oscillation analysis and damping control therefore commonly rely on linearized models, which do not capture the nonlinear oscillatory behavior induced by large disturbances. This paper proposes an isostable-based model reduction method for nonlinear modal analysis of power systems. The method constructs an invariant manifold associated with a selected oscillatory mode and uses isostable coordinates to describe the mode with only two real state variables. The isostable formulation gives linear autonomous modal dynamics, with nonlinear state reconstruction and input response computed on the modal manifold. An optimal damping control problem is then formulated directly in the reduced coordinates. Case studies on the IEEE 39-bus system demonstrate the accuracy of the proposed model in describing nonlinear oscillations and show improved damping compared with control designed using a linear reduced model.

0.38

Time-Domain Data-Driven Loewner Reduced-Order Models for Electromagnetic Simulation

eess.SP physics.comp-ph ·2026-10-15 ·Pablo Biurrun, Carlos J. Ramos-Salas, Luis D. Angulo, Valentin de la Rubia
similarity 0.48
Abstract

This paper presents a data-driven Loewner framework for constructing reduced-order models (ROMs) from time-domain electromagnetic (EM) simulation data. High-fidelity simulation of microwave devices can be computationally expensive, particularly when fine spatial discretization and long observation windows are required. The proposed method uses transient input-output data to construct Loewner and shifted Loewner matrices, from which a reduced descriptor realization is obtained through singular value decomposition (SVD). The resulting models are identified from a limited training window and used to predict responses over substantially longer time intervals, with prediction windows up to 50 times the duration of the training window. The method is formalized as an explicit, reproducible algorithm and validated against full-order simulations for four microwave structures: a substrate-integrated-waveguide filter, a frequency-selective surface, an evanescent-mode coaxial comb-line filter, and a diplexer. The results demonstrate the potential of Loewner-based identification to provide compact models of electromagnetic responses while reducing the need for repeated full-order simulation.

0.23

Nonlinear Participation Factor-based Power System Model Reduction Addressing Near-Resonance Conditions

eess.SY math.DS ·2026-09-27 ·Mahsa Sajjadi, Kai Sun
similarity 0.48
Abstract

This paper proposes an adaptive model reduction approach based on nonlinear participation factors (NPFs) which determines the most effective selection of unimportant generators in a power system to be linearized to accelerate time-domain simulation for the entire system. The method enables a dynamic transition between the full-order model, and a hybrid reduced model. It uses modal energies to rank system modes under contingencies, and computes NPFs for highly energized modes based on Normal Form theory. To accelerate the computation of NPFs and make it achievable online, a tensor contraction technique is introduced. The proposed approach is tested on a 48-machine, 140-bus NPCC system using both partitioned and unpartitioned strategies. It demonstrates significant simulation speedup while preserving better accuracy than a linear participation factor-based method if the nonlinear behaviors of the system cannot be ignored, especially when a near-resonance condition is presented.

0.28

Sparse Orthogonal Regression Technique: A Spectral Framework for Equation Discovery, Approximation, and Integration

cs.LG ·2026-08-13 ·Sabin Roman, Ljupco Todorovski, Saso Dzeroski
published similarity 0.47
Abstract · 15 pages, 4 figures. Accepted for oral presentation at the 29th International Conference on Discovery Science (DS 2026), Mainz, Germany, Oct…

We develop the Sparse Orthogonal Regression Technique (SORT), a sparse spectral framework for learning orthonormal-basis expansions from noisy and irregularly sampled data. SORT estimates expansion coefficients directly from observations using L1-regularized regression, avoiding explicit quadrature or analytic inner-product evaluation. The central application is data-driven discovery of ordinary differential equations: vector fields are represented in chosen orthogonal bases and learned as sparse coefficient expansions. This provides a complementary route to symbolic regression, grammar-based discovery, and SINDy-style sparse identification by first recovering a compact spectral representation, which can later guide searches for simpler analytic forms. Across the dynamical-system experiments, SORT matches or improves upon library-based sparse-regression baselines when the basis is well adapted to the problem, and shows more stable degradation under sparse sampling, noisy derivative estimates, and representation mismatch. Specific examples illustrate why this representation is useful: if a finite library misses the problem-specific nonlinearity, the resulting model can fail. SORT is not immune to mismatch, but it shifts the problem away from brittle selection among generic terms to basis design adapted to the problem domain. The experiments also show that dominant low-order coefficients persist as model order increases, supporting order-consistent model growth. Beyond equation discovery, the same learned expansion supports nonlinear approximation and estimation of complex, high-dimensional integrals by coefficient readout. Overall, SORT provides a reusable intermediate representation for system identification, approximation, and integration, while making basis design an explicit part of the scientific modeling problem.

0.28

High-Order Sinusoidal Modeling for Precise Parameter Refinement

eess.SP eess.AS ·2026-10-15 ·Shaowen Chen, Tomoki Toda
unusual similarity 0.47
Abstract · This manuscript is currently under review for publication in the IEEE Transactions on Signal Processing. This work has been submitted to the…

Although the amplitude estimation of sinusoids is a linear and tractable problem when their frequencies are known, the accuracy of signal modeling is fundamentally limited by the inevitable frequency mismatches produced by existing methods. Quasi-harmonic modeling (QHM) and its extensions (aQHM and eaQHM) offer the ability to refine frequency estimates while extracting amplitudes; however, their extraction and correction capabilities remain limited. In this paper, we first revisit QHM methods from the perspective of frequency mismatches, and reveal that their performances are essentially constrained by the order of the model. Specifically, QHM methods are linear models and thus incapable of capturing higher-order frequency variations, leading to suboptimal modeling accuracy. Second, to address this limitation, we propose a higher-order modeling framework that enables more precise approximation of signal components. Eventually, we qualitatively characterize the optimization problem and employ the Levenberg--Marquardt (LM) algorithm for parameter estimation. As a result, the proposed method allows for significantly improved estimation of amplitudes, frequencies, and phases of sinusoidal components, enabling more accurate signal modeling. Experiments on both simulation study and speech signals demonstrate the superiority of the high-order model in frequency refinement and parameter extraction and its robustness under additive noise conditions.

0.24

Learning Reduced-Order Dynamics with Singularity via Latent-Augmented Neural Ordinary Differential Equations

cs.LG ·2026-08-22 ·Xiaorui Wang, Yu Zhou, Wenjie Mei, Dongzhe Zheng, Yang Bai +1 more
top venue similarity 0.47
Abstract

This paper addresses the issue of self-intersecting trajectories (in phase space) in industrial reduced-order modeling and proposes the Latent-Augmented Neural Ordinary Differential Equations (LA-NODEs) framework. From the perspective of artificial intelligence, the proposed method augments conventional neural ordinary differential equations to enhance model expressiveness, enabling the representation of conflicting vector fields that may arise in reduced-order systems, thereby improving learning accuracy. Through theoretical analysis, the underlying mechanism of the framework is established, and a condition for determining the minimum required augmentation dimension is derived. From the perspective of engineering applications, the effectiveness of the proposed method is validated on the reduced-order system of two representative industrial models, namely an interior permanent magnet synchronous motor (IPMSM) drive and a distributed energy system (DES). Experimental results demonstrate that the proposed method can recover system features that are difficult to capture using conventional approaches and achieve superior performance in terms of prediction accuracy and modeling fidelity, thereby providing an effective approach for high-precision data-driven modeling of complex industrial systems.

0.47