CS Paper Radar

Time-Domain Data-Driven Loewner Reduced-Order Models for Electromagnetic Simulation

Pablo Biurrun, Carlos J. Ramos-Salas, Luis D. Angulo, Valentin de la Rubia

eess.SP physics.comp-ph ·submitted 2026-10-15 20:25 UTC · v1

Abstract

This paper presents a data-driven Loewner framework for constructing reduced-order models (ROMs) from time-domain electromagnetic (EM) simulation data. High-fidelity simulation of microwave devices can be computationally expensive, particularly when fine spatial discretization and long observation windows are required. The proposed method uses transient input-output data to construct Loewner and shifted Loewner matrices, from which a reduced descriptor realization is obtained through singular value decomposition (SVD). The resulting models are identified from a limited training window and used to predict responses over substantially longer time intervals, with prediction windows up to 50 times the duration of the training window. The method is formalized as an explicit, reproducible algorithm and validated against full-order simulations for four microwave structures: a substrate-integrated-waveguide filter, a frequency-selective surface, an evanescent-mode coaxial comb-line filter, and a diplexer. The results demonstrate the potential of Loewner-based identification to provide compact models of electromagnetic responses while reducing the need for repeated full-order simulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Machine Learning Assisted Inverse Design of Pixelated mmWave Patch Antennas

eess.SP cs.AI ·2026-08-24 ·Nadeem Rather, Holger Claussen, Lester Ho
published similarity 0.52
Abstract

A machine learning-assisted framework for the inverse design of pixelated millimetre-wave patch antennas targeting the 22--30 GHz band is presented. The antenna surface is represented as a 19x23 binary pixel grid on a Rogers RT/duroid 5880 substrate, where each pixel is either metal or empty, with a continuous electrical path from the feed enforced by design. An initial dataset of approximately 6,000 full-wave CST simulations was collected from structured random pixel patterns, of which only around 40% achieved a resonance with |S11| <= -10 dB anywhere in the band, resulting in an imbalanced dataset. To improve simulation efficiency, an XGBoost binary classifier was trained on this data to distinguish resonant from non-resonant patterns before simulation. Using the classifier as a pre-simulation filter, an additional 4,000 patterns were selected and simulated, raising the overall proportion of resonant designs in the combined 10,000-sample dataset from approximately 40% to 52%. A hybrid CNN-BiLSTM forward surrogate was then trained on this augmented dataset to predict the full complex S11 response across 801 frequency points, using a physics-guided composite loss that explicitly emphasises resonance dip accuracy. Finally, an inverse design model was developed that optimises in a compact 64-dimensional latent space using gradient descent to generate pixel patterns matching a desired S11 specification. The results show good agreement between the surrogate-predicted and CST-simulated |S11| responses for the generated designs and demonstrate the feasibility of automatically designing and reconfiguring antenna structures.

0.45

A Hierarchically Compressed Immittance Operator Formulation for Fast Statics-to-Full-Wave Electromagnetic Simulation with the Boundary Element Method

cs.CE physics.comp-ph ·2026-11-16 ·Shashwat Sharma
similarity 0.51
Abstract · 15 pages, 12 figures. Submitted to the IEEE Transactions on Antennas and Propagation

The boundary element method allows the electromagnetic simulation of three-dimensional problems with a two-dimensional discretization, using a surface integral representation of Maxwell's equations. For applications involving broadband simulations or multiscale geometries, the well-known low-frequency breakdown of conventional integral equation formulations must be addressed, while ensuring that dielectric, semiconducting, and lossy metallic regions are modeled rigorously, including the skin effect. In this work, a new boundary element formulation based on an immittance operator is proposed, where the underlying integral equations are inherently valid from statics to the full-wave regime. To enable efficient matrix assembly and solution, a hierarchical matrix compression strategy is devised, leveraging fast direct factorization as an intermediate step, and fast matrix-vector products for the iterative solution of the final system of equations. The proposed formulation is capable of electrostatic, magnetostatic, quasistatic, and full-wave simulations of dielectrics, semiconductors, and lossy metals. Representative numerical examples drawn from a variety of applications demonstrate the accuracy and efficiency of the proposed method.

0.41

Fast Angular Sweep Monostatic Radar Cross Section Computation via Model Order Reduction

eess.SP physics.comp-ph ·2026-10-07 ·Noelia Naranjo, Valentin de la Rubia
code/data similarity 0.51
Abstract

The radar cross section (RCS) is a fundamental parameter in radar engineering, as it determines the detectability of a given target by a radar system. Increasing interest in very low observability (VLO) targets has arisen recently. As a result, especial effort is put in developing numerical tools to accurately predict the electromagnetic scattering from perfect electric conductor objects. Integral equation methods are commonly used in this task. However, full-wave computation of the monostatic RCS at a single angle can be rather time-consuming, nevermind computing the RCS in a specific angular interval with a fine sampling. In fact, this is what is needed in industrial applications. A reduced-order model for fast full-wave monostatic RCS evaluation is proposed to easily achieve fine details in the desired angular domain. An open source integral equation solver, taken into account as a black box, is used to get the electromagnetic scattering in non-penetrable objects at some specific incident angles. Several radar targets will show the possibilities and capabilities of these model order reduction approaches.

0.34

End-to-End Neural Modeling of EM Response and Design Performance for Free-Form RFIC Passives

eess.SP cs.LG ·2026-10-25 ·Yuhao Mao, Chenhao Chu, Martin Vechev, Hua Wang
publisheddatasetcode/data similarity 0.51
Abstract · NeurIPS'26

Passive matching networks are critical components in radio-frequency integrated circuits (RFICs), but their design is bottlenecked by expensive finite-difference-based electromagnetic (EM) simulation. We propose an end-to-end neural framework for free-form RFIC passives that predicts both EM response and downstream design performance under varying frequency and circuit contexts, combining a frequency-conditioned neural simulator with a circuit-conditioned neural solver. To improve design performance prediction, the simulator outputs a neural EM response consisting of both the explicit EM response and a complementary response, together with a dependence regularizer that encourages the two responses to capture orthogonal information. To evaluate the proposed framework, we construct a large-scale dataset of free-form passive layouts, synthesized from both expert-designed contours and random paths. Our 21M-parameter model achieves high accuracy across a broad frequency range, circuit contexts and passive matching settings, with $R^2>0.98$ for almost all targets, while providing orders-of-magnitude faster evaluation than traditional EM simulation. Code available at https://github.com/ETH-IDEAS/RFIC-NeuralSim.

0.37

Wideband Microwave Linear Analog Computer (MiLAC) for Frequency-Flat and Frequency-Selective Processing

cs.IT eess.SP ·2026-11-01 ·Juan Vidal Alegría, Matteo Nerini, Bruno Clerckx
similarity 0.50
Abstract · 15 pages, 6 figures. Copyright information may change upon publication at an IEEE journal

Microwave linear analog computer (MiLAC) has been proposed as an analog processing architecture to perform efficient computation in the microwave domain. Consisting of reconfigurable impedance networks, a MiLAC can extract many of the gains of large multi-antenna systems without costly digital processing, e.g., achieving capacity in narrowband multiple-input single-output (MISO). However, the behavior of wideband MiLAC, required to support high data-rate transmissions, is widely unknown. The impedance components of MiLACs have non-trivial frequency-dependent response, requiring specific implementations to characterize it. In this work, we consider MiLAC implementations based on LC resonators with tunable capacitance, which allow synthesizing near-arbitrary passive lossless impedance matrices at individual frequencies using inductors and varactors. We characterize the mapping between optimal MISO precoding at a reference frequency, and the vector of capacitances configuring the MiLAC. We derive the degrees of freedom (DoFs) remaining after fixing such optimum precoding at the reference frequency, and show that these DoFs can be exploited to tune the frequency response of the MiLAC. We propose two techniques to exploit these DoFs: a closed-form approach for frequency-flat MiLAC processing, and a numerical approach for multi-frequency MiLAC processing, optimizing processing at frequencies other than the reference one. The frequency-flat approach shows satisfactory performance in a simulated frequency-flat millimeter-wave scenario, approaching the performance of digital processing. The multi-frequency approach can adapt to the frequency-selectivity of a simulated sub-6GHz scenario, attaining gains over frequency-flat digital processing. This constitutes the first demonstration that realistic MiLAC implementations can be configured to perform independent computations at different frequencies.

0.27

Bounds on Shaping Partially Coherent Microwaves with Programmable Scattering Systems

eess.SP physics.app-ph ·2026-08-31 ·Philipp del Hougne
similarity 0.50
Abstract · 15 pages with 3 figures

We derive bounds on manipulating partially coherent microwaves with programmable scattering systems. We first consider the concentration of power from a partially coherent input into a single output port and derive a prototype-aware bound by combining multiport network theory (MNT) with semidefinite relaxation (SDR). We then address general coherency-matrix synthesis, deriving architecture-independent bounds on fidelity and useful strength, prototype-specific scalar refinements thereof, and fully prototype-aware SDR bounds on the useful-strength--fidelity Pareto frontier. The prototype-aware formulations account for mutual coupling, loss, discrete tunability, and static scattering. We evaluate the bounds on four experimental RIS-parametrized MIMO systems with up to 100 1-bit-programmable elements, using proxy-MNT models estimated from measurements. The resulting bounds are generally tight compared with feasible discrete-optimization outcomes. Interestingly, for coherency synthesis, the simpler bounds can in some cases be tighter than the fully prototype-aware bounds, highlighting their complementarity. Our results provide certified limits for wave-domain processing and harvesting of partially coherent microwaves.

0.48

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.49
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42

Maxwell's equations are universal for sparse linear algebra

cs.CC physics.optics ·2026-10-28 ·Yannick Augenstein
theorycode/dataunusual similarity 0.48
Abstract · 109 pages (18 pages main text, 91 pages Supplementary Information), 8 figures, 4 tables. v2: adds numerical illustrations (Fig. 3, SI Part V…

Optical and wave-based analog computing has re-emerged as a route to accelerating linear algebra, with metamaterials and photonic circuits shown to invert matrices and solve integral equations. However, it has remained unclear which problems such passive structures can represent, and at what cost, once encoding, precision, conditioning and readout are accounted for. Here, we show that every polynomially conditioned sparse linear system can be compiled into a three-dimensional dielectric -- a cavity filled with lossless, isotropic material of bounded permittivity -- whose time-harmonic response encodes its solution. For $m$ nonzero coefficients, the volume of the structure and the cost of writing it down and reading out the answer scale as $\tilde O(m^{3/2})$, coefficients require only $O(\log m)$ bits, and every field that approximately satisfies Maxwell's equations decodes to an approximate solution. We prove the construction for the continuum equations and give a computer-assisted version for the Yee discretization underlying finite-difference solvers. Read in reverse, it implies that electromagnetic simulation is, up to this overhead, as hard as general sparse linear algebra: a sufficiently fast general-purpose Maxwell solver would yield a faster sparse linear solver.

0.50