CS Paper Radar

End-to-End Neural Modeling of EM Response and Design Performance for Free-Form RFIC Passives

Yuhao Mao, Chenhao Chu, Martin Vechev, Hua Wang

eess.SP cs.LG ·submitted 2026-10-25 17:34 UTC · v1
publisheddatasetcode/data

Abstract

Passive matching networks are critical components in radio-frequency integrated circuits (RFICs), but their design is bottlenecked by expensive finite-difference-based electromagnetic (EM) simulation. We propose an end-to-end neural framework for free-form RFIC passives that predicts both EM response and downstream design performance under varying frequency and circuit contexts, combining a frequency-conditioned neural simulator with a circuit-conditioned neural solver. To improve design performance prediction, the simulator outputs a neural EM response consisting of both the explicit EM response and a complementary response, together with a dependence regularizer that encourages the two responses to capture orthogonal information. To evaluate the proposed framework, we construct a large-scale dataset of free-form passive layouts, synthesized from both expert-designed contours and random paths. Our 21M-parameter model achieves high accuracy across a broad frequency range, circuit contexts and passive matching settings, with $R^2>0.98$ for almost all targets, while providing orders-of-magnitude faster evaluation than traditional EM simulation. Code available at https://github.com/ETH-IDEAS/RFIC-NeuralSim.

Comment
NeurIPS'26

Closest papers

Nearest neighbours by meaning across the whole index.

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.71
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52

RFBench: A Simulator-Grounded Multimodal Benchmark for Passive RF Layout Design and Understanding

cs.AI cs.CVcs.LG ·2026-11-17 ·Jiarui Cui, Boxun Yan
benchmarkdatasetcode/data similarity 0.69
Abstract · 29 pages, 4 figures. Code: https://github.com/jerry66s6/RFBench . Data: https://huggingface.co/datasets/Jerry1030/RFBench

While multimodal language models can interpret diagrams and generate structured outputs, their capacity to connect passive radio-frequency (RF) design intent, layout geometry, and electromagnetic behavior remains largely untested. To address this gap, we introduce RFBench, a simulator-grounded dataset and benchmark for passive RF layout design and understanding. The dataset contains 10,000 two-port planar layouts simulated using ADS Momentum, with each layout represented by editable geometric primitives, a raster image, a 16x16 occupancy grid, complex S-parameters at 201 frequency points, a structural category, and an RF response label. Building on these aligned representations, we define seven tasks spanning specification-conditioned layout generation, representation translation, response prediction, simulator-based validation, design diagnosis and improvement, structural understanding, and response classification. Extensive baselines across seven multimodal language models reveal systematic weaknesses in generating structurally valid layouts and predicting electromagnetically faithful responses. We show that RF-specific fine-tuning increases T1a structural validity from 0.0% to 83.2% and the T3 primitive-input within-2-dB rate from 17.7% to 62.8%, demonstrating the value of domain adaptation while leaving considerable room for further progress. RFBench establishes a common testbed for evaluating multimodal RF capabilities and guiding the development of models that connect design intent and layout representations with physical behavior.

0.33

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.67
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42

TARGet: Topology-Aware Fusion-based Radio Frequency Circuit Functional Modeling using Graph Neural Networks

cs.LG ·2026-08-26 ·Soroosh Noorzad, Sebastian Bodero, Morteza Fayazi
publishedcode/data similarity 0.66
Abstract · To be published in International Conference on Computer-Aided Design (ICCAD 26)(9 pages)

Automatic synthesis of analog and Radio Frequency (RF) circuits is an emerging area that requires an efficient circuit modeling method. In recent years, Machine Learning (ML) solutions have played a promising role in this regard. However, many existing ML approaches require separate training data for each circuit topology, even when a single circuit component is added or removed. In addition, they overlook circuit topology information, which limits their ability to capture complex component interactions. Furthermore, they rely on fully connected neural networks with flat feature representations, which require substantial amounts of training data. In this work, we propose an open-source topology-aware RF circuit modeling method, TARGet. Our model considers the circuit at two levels: sub-circuits and the overall circuit topology. At the sub-circuit level, TARGet leverages S-parameter representations to capture sub-circuit behavior rather than relying on individual circuit components, providing a reusable behavioral abstraction for RF building blocks. Moreover, TARGet explicitly incorporates circuit topology information into the model, enabling it to learn across multiple topologies. TARGet introduces a novel fusion-based architecture that integrates Graph Neural Networks (GNNs) and sub-circuit connectivity-aware neural networks to improve data efficiency. Experimental evaluation across multiple RF circuit topologies demonstrates that TARGet achieves sub-1% prediction error while reducing the required training data by up to 35.5x compared to state-of-the-art (SOTA) approaches. Furthermore, TARGet achieves 9.7x higher prediction accuracy under a strict 1% error threshold relative to SOTA models. A held-out matching-network evaluation further demonstrates zero-shot transfer to an unseen sub-circuit topology, where TARGet reduces NMAE by up to 45%.

0.54

Route-Aware EM Surrogate for Automated LC Matching Network Optimization

cs.AR eess.SP ·2026-10-30 ·Subhadip Ghosh, Surya Srikar Peri, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.61
Abstract · Submitted to the IEEE International Symposium on Circuits and Systems (ISCAS) 2027

This paper proposes an open-source automated LC matching network optimization framework that combines schematic-level design optimization with electromagnetic (EM)-aware post-layout refinement. An ML-based surrogate predicts the frequency-dependent complex admittance of individual routes, enabling reuse across matching network topologies and physical layouts for the same technology node without retraining. These route models guide post-layout passive retuning to recover matching performance while preserving the layout footprint. Evaluated in a commercial 65nm CMOS technology, the surrogate achieves 1.94-4.91% mean absolute percentage error with respect to a full-wave electromagnetic solver, with no detected passivity violations. Across nine LC matching networks operating at 5-95GHz, our framework recovers S_11 from -6.37dB, for schematic-level optimization after post-layout degradation to -22.27dB after EM-aware post-layout refinement. All designs meet matching targets under full-layout EM verification in optimization runtimes below 70s.

0.34

Simulator-Refined Diffusion for Radio-Frequency Inverse Design

cs.LG cs.AI ·2026-09-29 ·Jinhao Liang, Jacob K. Christopher, Michael Frei, Tommaso Dreossi, Nando Fioretto
similarity 0.60
Abstract

Diffusion models have shown potential in inverse design of printed circuit boards (PCBs), enabling the generation of layouts conditioned on target S-parameters. Despite this promise, applying diffusion models to PCB layout generation remains challenging due to their difficulty in meeting the quantitative electromagnetic specifications. A common approach is gradient-based guidance, which biases the diffusion sampling process with the gradient of an objective used for evaluation. However, full-wave electromagnetic simulators are accurate but expensive and typically non-differentiable, whereas differentiable surrogates are informative but not always reliable. To address these limitations, this paper proposes Simulator-Refined Diffusion (SRD), a novel combination of a low-fidelity differentiable surrogate and a high-fidelity non-differentiable simulator within the diffusion sampling process. Unlike standard zeroth-order optimization, which requires a great number of random perturbations, our approach uses the surrogate's gradient to propose the perturbation direction while the simulator then searches based on this direction to identify an effective design update. Experimental results across different settings show that this method consistently outperforms current state-of-the-art methods, producing layouts whose simulated S-parameters match the target specifications up to 21.2% closer for in-distribution targets and up to 19.8% for out-of-distribution targets.

0.15

RFWeave: Learning Wireless Propagation Across Scenes and Transceiver Configurations

eess.SP cs.LG ·2026-10-12 ·Shurui Xu, Xiao Ye, Yijie Bian, Junjie Ai, Yuxuan Chen +3 more
similarity 0.58
Abstract · 20 pages, 12 figures, 12 tables, including appendices

Wireless propagation modeling is foundational to the evaluation and design of modern communication systems. To achieve accurate wireless propagation prediction, recent learning-based approaches leverage scene geometry and materials, demonstrating promising generalization across transceiver locations and unseen scenes. However, these approaches remain largely confined to a fixed configuration of array size, receiver orientation, and transmit beam. In this work, we introduce RFWeave, a learned wireless propagation model designed to generalize across scenes, transceiver locations, and transceiver configurations. To accommodate varying array structures, RFWeave incorporates variable-length transceiver tokens that represent antenna elements individually. Furthermore, to capture the geometry between transmit and receive antenna elements, RFWeave aggregates their pairwise spatial relations into propagation tokens. A configuration-conditioned decoder predicts the spatial spectrum and received power. RFWeave is trained on a large-scale simulated dataset spanning 10,000 indoor scenes and more than 5 million channel records under diverse transceiver configurations. Extensive evaluations show that RFWeave achieves state-of-the-art performance across all evaluated generalization settings, improving spatial spectrum structural similarity (SSIM) by up to 15.7% and reducing received power mean absolute error (MAE) by up to 35.4% over the strongest baselines on unseen scenes. Additional experiments on measured DICHASUS data and in beam management further demonstrate RFWeave's broader applicability to real-world channels and downstream wireless tasks.

0.24

AbsorbEvo: An Agentic Framework for Autonomous Inverse Design of Microwave Absorbers

cs.AI ·2026-10-01 ·Zhicheng Feng, Yubo Zhao, Xuefeng Yao
similarity 0.57
Abstract

Designing high-performance microwave absorbers requires specialized expertise in electromagnetic theory, materials science and simulation programming, and entails time-consuming optimization. Here, we present AbsorbEvo, an agentic framework for autonomous inverse design that translates natural-language performance objectives into designs verified by full-wave simulations. Its candidate evolution strategy integrates language reasoning, physics-based prediction and historical feedback. A large language model proposes the directions and magnitudes of parameter adjustments based on task objectives and computational history. The system combines directed increments with global sampling to generate candidates and uses a low-cost predictive model as a physics prior to rank them. Only high-ranking designs undergo full-wave simulation. Results passing physical validity checks are used to evaluate performance and guide subsequent search. Experience from training tasks is further distilled into textual skills, which are independently validated before use in new tasks. Under identical proposal budgets on held-out AbsorbBench-36 tasks, AbsorbEvo achieved a task success rate of 79.17%, versus 25.00% for a generic agent and 12.50% for random search. Its mean best coverage was 0.7816, compared with 0.6434 and 0.6448, respectively. By integrating language reasoning and physics-based feedback into design decisions, AbsorbEvo provides a methodological foundation for natural-language-driven autonomous inverse design of microwave absorbers.

0.25