CS Paper Radar

Simulator-Refined Diffusion for Radio-Frequency Inverse Design

Jinhao Liang, Jacob K. Christopher, Michael Frei, Tommaso Dreossi, Nando Fioretto

cs.LG cs.AI ·submitted 2026-09-29 18:26 UTC · v1

Abstract

Diffusion models have shown potential in inverse design of printed circuit boards (PCBs), enabling the generation of layouts conditioned on target S-parameters. Despite this promise, applying diffusion models to PCB layout generation remains challenging due to their difficulty in meeting the quantitative electromagnetic specifications. A common approach is gradient-based guidance, which biases the diffusion sampling process with the gradient of an objective used for evaluation. However, full-wave electromagnetic simulators are accurate but expensive and typically non-differentiable, whereas differentiable surrogates are informative but not always reliable. To address these limitations, this paper proposes Simulator-Refined Diffusion (SRD), a novel combination of a low-fidelity differentiable surrogate and a high-fidelity non-differentiable simulator within the diffusion sampling process. Unlike standard zeroth-order optimization, which requires a great number of random perturbations, our approach uses the surrogate's gradient to propose the perturbation direction while the simulator then searches based on this direction to identify an effective design update. Experimental results across different settings show that this method consistently outperforms current state-of-the-art methods, producing layouts whose simulated S-parameters match the target specifications up to 21.2% closer for in-distribution targets and up to 19.8% for out-of-distribution targets.

Closest papers

Nearest neighbours by meaning across the whole index.

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.68
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52

End-to-End Neural Modeling of EM Response and Design Performance for Free-Form RFIC Passives

eess.SP cs.LG ·2026-10-25 ·Yuhao Mao, Chenhao Chu, Martin Vechev, Hua Wang
publisheddatasetcode/data similarity 0.60
Abstract · NeurIPS'26

Passive matching networks are critical components in radio-frequency integrated circuits (RFICs), but their design is bottlenecked by expensive finite-difference-based electromagnetic (EM) simulation. We propose an end-to-end neural framework for free-form RFIC passives that predicts both EM response and downstream design performance under varying frequency and circuit contexts, combining a frequency-conditioned neural simulator with a circuit-conditioned neural solver. To improve design performance prediction, the simulator outputs a neural EM response consisting of both the explicit EM response and a complementary response, together with a dependence regularizer that encourages the two responses to capture orthogonal information. To evaluate the proposed framework, we construct a large-scale dataset of free-form passive layouts, synthesized from both expert-designed contours and random paths. Our 21M-parameter model achieves high accuracy across a broad frequency range, circuit contexts and passive matching settings, with $R^2>0.98$ for almost all targets, while providing orders-of-magnitude faster evaluation than traditional EM simulation. Code available at https://github.com/ETH-IDEAS/RFIC-NeuralSim.

0.37

Diffusion-Based Inverse Design of Dielectric Resonator Metasurfaces for Shaping Smart Electromagnetic Environments

cs.LG physics.app-phphysics.comp-ph ·2026-08-30 ·M. Tsukerman, K. Grotov, D. Vovchuk, P. Ginzburg
similarity 0.58
Abstract

Future wireless systems are expected to transform the surrounding space from a passive propagation medium into a smart electromagnetic environment, where engineered surfaces control wave propagation, support wireless sensing, and create programmable electromagnetic fingerprints. A key challenge in realizing this vision is the inverse design of metasurfaces for tailored electromagnetic propagation. While forward analysis evaluates the response of a known geometry, the inverse task starts from a prescribed scattering signature and seeks a physically realizable structure that produces it. This inverse task is inherently nonlinear and often high-dimensional, while candidate solutions may be non-unique and provide no direct indication of practical realizability. Here, we introduce a conditional diffusion framework for inverse design of dielectric resonator metasurfaces from target angular scattering patterns. Trained on T-matrix simulated geometry-response pairs, the model learns a conditional distribution of geometries instead of a deterministic mapping, enabling multiple candidate designs for the ill-posed inverse problem. The best generated metasurface achieves a mean percentage error of 1.39%, outperforming CMA-ES optimization (4.1% after 10 h) while requiring only about one minute for after-training inference. The model also produces lower error distributions than deterministic neural baselines for out-of-distribution spectra, highlighting the potential of diffusion models for efficient metasurface design.

0.28

Band-Selective Microwave Cavity Optimization Using Differentiable FDTD: Gradient-Guided Search Versus Structured Random Search

eess.SP ·2026-08-20 ·Hasan Yiğit, Kutlu Karayahşi
benchmarkunusual similarity 0.56
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

We compare gradient-based inverse design with structured random search for dielectric-loaded microwave cavities using an in-house JAX-based differentiable FDTD solver. The benchmark fixes material fraction, filtered density representation, initialization, band-energy objective, and measured selection wall time. Each selected design is evaluated in a separate 8000-step FDTD simulation. Across four target bands, three prescribed material fractions, and six seeds, gradient optimization achieves a higher in-band spectral-energy fraction in all 72 paired comparisons. The mean paired improvement is 0.356, with a 95 percent paired bootstrap interval of 0.339-0.374 and an exact two-sided sign-flip p value of 0.03125. Gradient, cavity-mode, CFL, material-fraction, and raw-output integrity checks pass before inference. Under matched material and computational budgets, the results support an advantage for gradient-based optimization in this cavity-design benchmark.

0.28

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.55
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42

From Generation to Discovery: Diffusion Mutation Kernels for Circuit and Physical Design

eess.SY ·2026-08-27 ·Dinithi Jayasuriya, Aravind Saravanan, Nilesh Ahuja, Amanda Rios, Amit Trivedi
similarity 0.54
Abstract

Generation and discovery are different problems. A generative model trained on valid artifacts reproduces a distribution, whereas discovery must produce artifacts that lie outside the observed corpus, satisfy hard structural constraints, and improve on established designs under evaluation that the model cannot influence. We introduce a diffusion-based discovery framework. Unlike conventional generative models that sample from learned distributions, it learns transition operators that transform existing artifacts into new candidates. Controlled partial re-noising followed by denoising defines a diffusion mutation kernel, a learned transition distribution that preserves the structural regularities of feasible designs while moving between regions of the design space. The learned model supplies feasibility structure only, and all correctness and performance judgments remain with external engineering tools. Intermediate diffusion trajectories are additionally monitored under a conformal risk budget so that unpromising candidates are discarded before expensive evaluation. We evaluate the framework on three electronic design spaces, an environment that supplies rigorous non-differentiable evaluators in the form of simulation, formal equivalence checking, and industrial physical implementation. The framework discovers 32-bit prefix adders that are formally verified equivalent to addition over all 2^64 input pairs and reduce delay by 17% and area by 18% relative to Kogge-Stone under a placed-and-timed flow; seven independently re-simulated amplifier topologies absent from the training corpus, spanning gains of 21.9-66.1 dB and bandwidths of 72.9 kHz-207 MHz; and macro placements on held-out netlists reaching 0.68x wirelength of an industrial placer.

0.44

Multi-Solution Inverse Design of Pixelated Patch Antennas Using an Autoregressive Transformer

cs.LG ·2026-10-29 ·Young-Mok Yun, Seung-Won Shin, Jaeyong Chung, Kyung-Sik Choi
similarity 0.54
Abstract · 16 pages, 28 figures, 7 tables

Deep-learning-based inverse design has emerged as a promising framework for pixelated patch antenna synthesis by enabling broader exploration of discrete geometry spaces and reducing design time compared with conventional template-based methods. Existing methods, including surrogate-assisted metaheuristic optimization, tandem inverse networks, and diffusion models, have advanced the field but still face practical limitations. Metaheuristic methods such as binary particle swarm optimization (BPSO) are sensitive to initialization and search hyperparameters and are often time-consuming, tandem networks have difficulty capturing the one-to-many nature of inverse antenna design, and diffusion models may require excessive complexity and data for moderate-scale binary layout synthesis. In this paper, an autoregressive (AR) transformer is presented for the inverse design of 10 x 10 pixelated patch antennas. Its sequential discrete generation process enables the synthesis of multiple feasible structures for a given target response. The pretrained model is further fine-tuned for dual-band design using step-shaped target responses with sharp spectral transitions, allowing intuitive band specification without manually constructing detailed S11 curves. Compared with BPSO, our proposed method generates valid and diverse antenna candidates more efficiently. Fabricated and measured examples confirm that distinct pixelated layouts can realize the desired antenna responses, thereby demonstrating the multi-solution capability of the proposed framework.

0.25

Route-Aware EM Surrogate for Automated LC Matching Network Optimization

cs.AR eess.SP ·2026-10-30 ·Subhadip Ghosh, Surya Srikar Peri, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.53
Abstract · Submitted to the IEEE International Symposium on Circuits and Systems (ISCAS) 2027

This paper proposes an open-source automated LC matching network optimization framework that combines schematic-level design optimization with electromagnetic (EM)-aware post-layout refinement. An ML-based surrogate predicts the frequency-dependent complex admittance of individual routes, enabling reuse across matching network topologies and physical layouts for the same technology node without retraining. These route models guide post-layout passive retuning to recover matching performance while preserving the layout footprint. Evaluated in a commercial 65nm CMOS technology, the surrogate achieves 1.94-4.91% mean absolute percentage error with respect to a full-wave electromagnetic solver, with no detected passivity violations. Across nine LC matching networks operating at 5-95GHz, our framework recovers S_11 from -6.37dB, for schematic-level optimization after post-layout degradation to -22.27dB after EM-aware post-layout refinement. All designs meet matching targets under full-layout EM verification in optimization runtimes below 70s.

0.34