CS Paper Radar

Route-Aware EM Surrogate for Automated LC Matching Network Optimization

Subhadip Ghosh, Surya Srikar Peri, Ramesh Harjani, Sachin S. Sapatnekar

cs.AR eess.SP ·submitted 2026-10-30 21:56 UTC · v1
code/data

Abstract

This paper proposes an open-source automated LC matching network optimization framework that combines schematic-level design optimization with electromagnetic (EM)-aware post-layout refinement. An ML-based surrogate predicts the frequency-dependent complex admittance of individual routes, enabling reuse across matching network topologies and physical layouts for the same technology node without retraining. These route models guide post-layout passive retuning to recover matching performance while preserving the layout footprint. Evaluated in a commercial 65nm CMOS technology, the surrogate achieves 1.94-4.91% mean absolute percentage error with respect to a full-wave electromagnetic solver, with no detected passivity violations. Across nine LC matching networks operating at 5-95GHz, our framework recovers S_11 from -6.37dB, for schematic-level optimization after post-layout degradation to -22.27dB after EM-aware post-layout refinement. All designs meet matching targets under full-layout EM verification in optimization runtimes below 70s.

Comment
Submitted to the IEEE International Symposium on Circuits and Systems (ISCAS) 2027

Closest papers

Nearest neighbours by meaning across the whole index.

End-to-End Neural Modeling of EM Response and Design Performance for Free-Form RFIC Passives

eess.SP cs.LG ·2026-10-25 ·Yuhao Mao, Chenhao Chu, Martin Vechev, Hua Wang
publisheddatasetcode/data similarity 0.61
Abstract · NeurIPS'26

Passive matching networks are critical components in radio-frequency integrated circuits (RFICs), but their design is bottlenecked by expensive finite-difference-based electromagnetic (EM) simulation. We propose an end-to-end neural framework for free-form RFIC passives that predicts both EM response and downstream design performance under varying frequency and circuit contexts, combining a frequency-conditioned neural simulator with a circuit-conditioned neural solver. To improve design performance prediction, the simulator outputs a neural EM response consisting of both the explicit EM response and a complementary response, together with a dependence regularizer that encourages the two responses to capture orthogonal information. To evaluate the proposed framework, we construct a large-scale dataset of free-form passive layouts, synthesized from both expert-designed contours and random paths. Our 21M-parameter model achieves high accuracy across a broad frequency range, circuit contexts and passive matching settings, with $R^2>0.98$ for almost all targets, while providing orders-of-magnitude faster evaluation than traditional EM simulation. Code available at https://github.com/ETH-IDEAS/RFIC-NeuralSim.

0.37

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.56
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52

CleanRoute: Reconciling DRC Compliance, Post-Layout Performance, and Runtime in Analog Routing

cs.AR ·2026-11-15 ·Bingyang Liu, Ziming Wei, Xiaohan Gao, Yang Hsu, David Z. Pan
similarity 0.55
Abstract · 8 pages, 6 figures

Automated analog routing remains a long-standing challenge because design-rule checking (DRC) compliance, post-layout performance preservation, and runtime reduction are difficult to achieve together. Existing analog routers have limited coverage of joined-metal design rules, lack control over topology-induced mismatch, and face a trade-off between DRC violations and runtime on uniform routing grids. In this paper, we introduce CleanRoute, an analog router that reconciles these three targets. Hierarchical rule enforcement assigns DRC checks and repairs to stages where the required geometry is complete, covering rules both between separate metal and where metal joins. IR-drop isolation constructs supply trees from current-mirror relationships and device currents to reduce topology-induced mismatch that geometric matching cannot eliminate and voltage drops along high-current paths. A flush-line grid adds net-specific lines aligned with device-metal edges to a coarse routing grid, providing DRC-compliant connections without uniform refinement. Experiments on ten operational transconductance amplifiers (OTAs) in a commercial 40nm process show that CleanRoute produces DRC-clean and functional layouts that pass layout versus schematic (LVS) checking on all benchmarks, with the strongest overall performance preservation and a median routing runtime of 8.82s, whereas the baselines produce no DRC-clean layouts.

0.30

Simulator-Refined Diffusion for Radio-Frequency Inverse Design

cs.LG cs.AI ·2026-09-29 ·Jinhao Liang, Jacob K. Christopher, Michael Frei, Tommaso Dreossi, Nando Fioretto
similarity 0.53
Abstract

Diffusion models have shown potential in inverse design of printed circuit boards (PCBs), enabling the generation of layouts conditioned on target S-parameters. Despite this promise, applying diffusion models to PCB layout generation remains challenging due to their difficulty in meeting the quantitative electromagnetic specifications. A common approach is gradient-based guidance, which biases the diffusion sampling process with the gradient of an objective used for evaluation. However, full-wave electromagnetic simulators are accurate but expensive and typically non-differentiable, whereas differentiable surrogates are informative but not always reliable. To address these limitations, this paper proposes Simulator-Refined Diffusion (SRD), a novel combination of a low-fidelity differentiable surrogate and a high-fidelity non-differentiable simulator within the diffusion sampling process. Unlike standard zeroth-order optimization, which requires a great number of random perturbations, our approach uses the surrogate's gradient to propose the perturbation direction while the simulator then searches based on this direction to identify an effective design update. Experimental results across different settings show that this method consistently outperforms current state-of-the-art methods, producing layouts whose simulated S-parameters match the target specifications up to 21.2% closer for in-distribution targets and up to 19.8% for out-of-distribution targets.

0.15

E-Layout: Layout-Stage Logic Restructuring via RL-Optimized Equality-Saturated Graph Retrieval-Augmented Generation

cs.AR ·2026-10-19 ·Wenji Fang, Rongjian Liang, Yi-Chen Lu, Cunxi Yu, Chen Chen +5 more
published similarity 0.52
Abstract · Accepted by ICCAD'26

Achieving high sign-off performance in advanced ICs increasingly depends on layout-stage optimization under realistic physical conditions. While recent efforts have moved toward synthesis-layout fusion, most existing works still focus on bringing estimated physical information earlier into synthesis, whose optimization does not fully correlate with real layout-stage behavior. Meanwhile, layout-stage optimization remains largely restricted to a fixed logic structure, relying mainly on buffering and sizing. This fundamentally constrains the optimization space under realistic physical conditions. To address this, we present E-Layout, an ML-driven framework for post-placement layout restructuring. E-Layout jointly optimizes logic transformation and physical implementation across multiple subcircuits under design-level timing feedback. This enables the selection of the most timing-beneficial set of disjoint restructured subcircuits to form the optimized circuit. Specifically, it first constructs equivalence-preserving logic alternatives via e-graph equality saturation, then couples logic selection with physical realization through a graph-based retrieval-augmented generation (RAG) model, and finally refines these local logic-physical decisions with reinforcement learning under design-level timing feedback. Evaluated on 9 diverse designs, it achieves on average 6% TNS improvement and 2% WNS improvement, while even reducing area by 1%, over an industry-leading commercial physical design flow.

0.37

APPlace: Co-Optimizing Device Locations and Access Points for Routing-Aware Analog Placement

cs.AR ·2026-10-29 ·Bingyang Liu, Xiaohan Gao, Souradip Poddar, David Z. Pan
top venuecode/data similarity 0.52
Abstract · Accepted to ASP-DAC 2027. 8 pages, 6 figures, 4 tables. Code: https://github.com/bingyang1132/applace

Analog layout automation remains challenging in Analog/Mixed-Signal circuit design, because parasitics and mismatches introduced during layout strongly affect circuit performance. Placement is especially critical among the layout stages, as it constrains the routing solution space and the achievable post-layout performance. Existing analytical placement methods optimize device coordinates under center-based wirelength proxies and leave access point (AP) selection to routing. In analog circuits, however, a routing pin is an extended piece of terminal metal rather than a fixed point, and the best AP on it depends on where the other connected devices are placed, so a coordinate-only placement optimizes for connection points that the router will not use. We present APPlace, a routing-aware analog placement framework that co-optimizes device locations and AP selections during global placement, followed by a legalization stage that preserves the structure established by global placement. Experimental results on four real-world analog benchmarks show that APPlace achieves better overall post-layout performance than representative baselines at comparable layout area. Ablation studies further show that removing AP co-optimization causes up to a 13 dB CMRR loss among the OTA benchmarks and a 23% increase in comparator delay.

0.86

Reconfigurable Antenna-Enhanced ISAC: A Unified Perspective on Electromagnetic Adaptation

eess.SP ·2026-11-03 ·Peilan Wang, Lei Xie, Weidong Mei, Jun Fang, Yihong Su +1 more
similarity 0.52
Abstract

Integrated sensing and communication (ISAC) enables sensing and communication (S&C) functions to share time, frequency, and hardware resources, offering an efficient paradigm for next-generation wireless systems. However, conventional fixed-configuration antenna (FCA) architectures provide limited flexibility in adapting the physical electromagnetic (EM) response of the end-to-end wireless link. This article develops a unified EM-adaptation perspective on reconfigurable antenna (RA)-enhanced ISAC systems. We distinguish transceiver-side (TSc-side) and environment-side (Env-side) RA deployments and identify five fundamental EM reconfiguration dimensions: position, orientation, radiation pattern, polarization, and frequency response. Building on this framework, we examine how these dimensions customize communication channels, actively control target information mapping for sensing, and reshape the interplay between S&C, particularly by improving compatibility between S&C requirements under shared resources. Two case studies illustrate how TSc-side and Env-side EM reconfiguration can improve spatial selectivity and the achievable S&C performance tradeoff. Finally, we discuss several promising directions for advancing RA-enhanced ISAC systems, including fundamental performance limits, low-overhead black-box optimization, and artificial intelligence (AI)-enabled semantic ISAC.

0.19

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.52
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42