CS Paper Radar

Bounds on Shaping Partially Coherent Microwaves with Programmable Scattering Systems

Philipp del Hougne

eess.SP physics.app-ph ·submitted 2026-08-31 13:03 UTC · v1

Abstract

We derive bounds on manipulating partially coherent microwaves with programmable scattering systems. We first consider the concentration of power from a partially coherent input into a single output port and derive a prototype-aware bound by combining multiport network theory (MNT) with semidefinite relaxation (SDR). We then address general coherency-matrix synthesis, deriving architecture-independent bounds on fidelity and useful strength, prototype-specific scalar refinements thereof, and fully prototype-aware SDR bounds on the useful-strength--fidelity Pareto frontier. The prototype-aware formulations account for mutual coupling, loss, discrete tunability, and static scattering. We evaluate the bounds on four experimental RIS-parametrized MIMO systems with up to 100 1-bit-programmable elements, using proxy-MNT models estimated from measurements. The resulting bounds are generally tight compared with feasible discrete-optimization outcomes. Interestingly, for coherency synthesis, the simpler bounds can in some cases be tighter than the fully prototype-aware bounds, highlighting their complementarity. Our results provide certified limits for wave-domain processing and harvesting of partially coherent microwaves.

Comment
15 pages with 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic Information Theory for Programmable Metasurfaces

eess.SP physics.optics ·2026-11-02 ·Philipp del Hougne, Marco Di Renzo, Owen D. Miller, David A. B. Miller
position similarity 0.62
Abstract · 17 pages with 3 figures

Programmable metasurfaces enable fine-grained control of electromagnetic waves and are creating new opportunities for information extraction, information transfer and information processing. Yet, despite exciting experimental demonstrations, their fundamental capabilities remain poorly understood. In this Perspective, we argue that programmable metasurfaces, and programmable wave systems more generally, call for an electromagnetic information theory that addresses limits at two levels, in a unified manner across applications like communications, sensing and computing. First, for a given physical platform, such a theory should bound achievable information manipulations, such as sensing precision, information-transfer rates, and computational performance. Second, at a more fundamental level, it should determine what non-programmable and programmable physical resources bound these system-specific limits, and what minimum resources are required to attain a prescribed level of performance. We discuss emerging theoretical approaches to these questions, and their connection to experimentally realizable systems. We examine how device thickness, programmable degrees of freedom, nonlocality, coupling and multiple scattering constrain these limits. Establishing the envisioned framework could clarify the ultimate capabilities of programmable metasurfaces and guide the design of future wave-based information systems.

0.27

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.60
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.59
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.41

Energy Efficiency in Microwave Linear Analog Computer (MiLAC)-Enabled Communications

eess.SP ·2026-08-31 ·Ahmed Magbool, Marco Di Renzo
similarity 0.57
Abstract · Submitted to the IEEE for possible publication

Microwave linear analog computers (MiLACs) have emerged as a promising architecture for energy-efficient wireless communications by shifting signal processing from the digital to the analog domain using tunable impedance networks. Several MiLAC architectures have recently been proposed, including the single-layer MiLAC (SLM), two-layer MiLAC (TLM), and hybrid digital-MiLAC (HDM). In this paper, we investigate the energy efficiency (EE) of these architectures. Specifically, we formulate EE maximization problems for the SLM, TLM, and HDM architectures under transmit power, user rate, and architecture-specific constraints, and develop a dimensionality reduction technique with successive convex approximation (SCA)-based algorithms to efficiently solve the resulting non-convex problems. We further derive a computationally efficient solution for EE maximization based on a search over only $(K+1)$ closed-form candidate solutions, where $K$ is the number of users, and analyze the asymptotic EE in the large-antenna regime under negligible quantization noise. Our analysis shows that the EE of the SLM, TLM, and HDM architectures scales as $\ln(N)/N^2$, whereas conventional digital beamforming (DBF) scales as $\ln(N)/N$, where $N$ denotes the number of transmit antennas. Despite these different scaling laws, the faster EE decay of MiLAC-based architectures becomes relevant only at very large antenna dimensions, typically involving thousands of antennas, while they maintain superior EE over practically relevant finite antenna regimes. Finally, we derive an approximation of the number of antennas required to achieve the maximum EE for each architecture and the corresponding EE. Simulation results show that, over practically relevant antenna regimes, MiLAC-based architectures achieve substantially higher EE than conventional fully digital and hybrid analog-digital beamforming.

0.42

Wave Processing Unit: Closed-Form Matrix Synthesis for Wave Computing in Multiuser MIMO Communications

eess.SP cs.IT ·2026-10-21 ·Xiaokun Teng, Yanqing Ren, Weicong Chen, Wankai Tang, Xiao Li +1 more
similarity 0.56
Abstract · Submitted to IEEE journals for possible publication

Wave computing offers a compelling route to bypass the latency and energy bottlenecks of digital baseband processing. However, existing wave-domain processors rely on task-specific, non-convex iterative optimization, which incurs substantial configuration overhead and limits real-time applications. In this paper, we propose the wave processing unit (WPU), a programmable planar Mach--Zehnder interferometer (MZI) network that accelerates matrix--vector multiplications in MIMO communications. First, we model the tunable MZI element as a parameterized $2\times2$ unitary transformation, and establish a closed-form synthesis framework for the WPU that decomposes an arbitrary unitary matrix into a cascade of MZI elements arranged in a compact rectangular topology. To handle arbitrary complex-valued operators, we further extend the method through singular value decomposition (SVD) and a hardware-efficient semi-unitary synthesis, avoiding redundant hardware and reducing the compilation complexity. We then apply the WPU to multiuser downlink precoding by an efficient WPU synthesis method, and compare the proposed architecture with hybrid and wave-domain ones. Numerical results demonstrate machine-precision synthesis with negligible residuals for up to $64\times64$ operators, with approximately $380\times$ faster configuration than iterative wave computing baselines. For 64-antenna, 8-user downlink precoding, WPU requires 87.5% fewer RF chains than the fully digital architecture while achieving the same sum rate under ideal hardware. These results highlight the potential of the WPU for precise, hardware-efficient wave-domain processing with rapid configuration.

0.23

Wideband Microwave Linear Analog Computer (MiLAC) for Frequency-Flat and Frequency-Selective Processing

cs.IT eess.SP ·2026-11-01 ·Juan Vidal Alegría, Matteo Nerini, Bruno Clerckx
similarity 0.56
Abstract · 15 pages, 6 figures. Copyright information may change upon publication at an IEEE journal

Microwave linear analog computer (MiLAC) has been proposed as an analog processing architecture to perform efficient computation in the microwave domain. Consisting of reconfigurable impedance networks, a MiLAC can extract many of the gains of large multi-antenna systems without costly digital processing, e.g., achieving capacity in narrowband multiple-input single-output (MISO). However, the behavior of wideband MiLAC, required to support high data-rate transmissions, is widely unknown. The impedance components of MiLACs have non-trivial frequency-dependent response, requiring specific implementations to characterize it. In this work, we consider MiLAC implementations based on LC resonators with tunable capacitance, which allow synthesizing near-arbitrary passive lossless impedance matrices at individual frequencies using inductors and varactors. We characterize the mapping between optimal MISO precoding at a reference frequency, and the vector of capacitances configuring the MiLAC. We derive the degrees of freedom (DoFs) remaining after fixing such optimum precoding at the reference frequency, and show that these DoFs can be exploited to tune the frequency response of the MiLAC. We propose two techniques to exploit these DoFs: a closed-form approach for frequency-flat MiLAC processing, and a numerical approach for multi-frequency MiLAC processing, optimizing processing at frequencies other than the reference one. The frequency-flat approach shows satisfactory performance in a simulated frequency-flat millimeter-wave scenario, approaching the performance of digital processing. The multi-frequency approach can adapt to the frequency-selectivity of a simulated sub-6GHz scenario, attaining gains over frequency-flat digital processing. This constitutes the first demonstration that realistic MiLAC implementations can be configured to perform independent computations at different frequencies.

0.27

Wave-Domain Semantic Equalization Using a Practical Dynamic Metasurface Antenna with Strong Mutual Coupling

eess.SP physics.app-ph ·2026-09-27 ·Yassine Sghaier, Emilio Calvanese Strinati, Philipp del Hougne
similarity 0.55
Abstract · 5 pages with 3 figures

Semantic mismatch between independently trained AI-native agents in heterogeneous networks can impair semantic communications. Hybrid analog-digital semantic equalization can align the incompatible latent representations without retraining the semantic transceivers. We study a practical realization of this approach based on a fabricated dynamic metasurface antenna (DMA), an emerging low-cost, low-power, ultracompact technology for hybrid analog-digital beamforming. We model the DMA-assisted channel using multiport-network theory (MNT), accounting for mutual coupling (MC), structural scattering, and binary lossy tuning states. We use the experimentally estimated MNT parameters of our fabricated 19-GHz DMA prototype with strong MC. We jointly optimize digital pre- and post-equalizers and the DMA at a reference receiver geometry for latent-space alignment, then freeze the digital stages and adapt only the DMA after receiver motion. In our CIFAR-10 image-classification task at the receiver, the jointly optimized system achieves 94.5% accuracy, while DMA-only adaptation restores a median accuracy of 90.3% after receiver motion. Our semantic-aware wave-domain adaptation substantially outperforms semantic-unaware benchmarks. We further observe that varying the DMA configuration across channel uses provides little additional benefit for either semantic-aware or semantic-unaware optimization.

0.37

Goal-Oriented Wave Computing for Direction-of-Arrival Estimation

eess.SP physics.app-ph ·2026-10-05 ·Mert Kalfa
benchmark similarity 0.55
Abstract · 9 pages, 2 figures, 4 tables

Programmable metasurfaces---arrays of elements whose electromagnetic response can be tuned electronically---can process signals as a wave propagates through or reflects off them, a paradigm known as wave-domain analog computing. The design strategy is typically indirect: the surface is fitted to a prescribed linear operator, such as a discrete Fourier transform, and the result is read from output power measurements. Using direction-of-arrival (DoA) estimation as a canonical benchmark, we study what this indirection costs across analog computing topologies, namely reflective reconfigurable intelligent surfaces (RIS), beyond-diagonal RIS (BD-RIS), and stacked intelligent metasurfaces (SIM). We first derive Cramér--Rao bounds for the complete physical estimation chain, including one that accounts for output detectors measuring only intensity. We then formulate a goal-oriented alternative where the surfaces are trained directly through the deployed readout, with no operator target. We observe that goal-oriented training lets sparsely connected or shallower surfaces reach the task performance of their more complex operator-fitted counterparts---despite nearly identical Fisher information---and that the advantage persists under coarsely quantized (1--3 bit) control. From 16 to 64 elements, the depth saving persists, while the connectivity a beyond-diagonal RIS needs grows with the aperture. Under tuner and per-layer loss, the goal-oriented designs keep their advantage.

0.25