CS Paper Radar

A Hierarchically Compressed Immittance Operator Formulation for Fast Statics-to-Full-Wave Electromagnetic Simulation with the Boundary Element Method

Shashwat Sharma

cs.CE physics.comp-ph ·submitted 2026-11-16 13:13 UTC · v1

Abstract

The boundary element method allows the electromagnetic simulation of three-dimensional problems with a two-dimensional discretization, using a surface integral representation of Maxwell's equations. For applications involving broadband simulations or multiscale geometries, the well-known low-frequency breakdown of conventional integral equation formulations must be addressed, while ensuring that dielectric, semiconducting, and lossy metallic regions are modeled rigorously, including the skin effect. In this work, a new boundary element formulation based on an immittance operator is proposed, where the underlying integral equations are inherently valid from statics to the full-wave regime. To enable efficient matrix assembly and solution, a hierarchical matrix compression strategy is devised, leveraging fast direct factorization as an intermediate step, and fast matrix-vector products for the iterative solution of the final system of equations. The proposed formulation is capable of electrostatic, magnetostatic, quasistatic, and full-wave simulations of dielectrics, semiconductors, and lossy metals. Representative numerical examples drawn from a variety of applications demonstrate the accuracy and efficiency of the proposed method.

Comment
15 pages, 12 figures. Submitted to the IEEE Transactions on Antennas and Propagation

Closest papers

Nearest neighbours by meaning across the whole index.

Quasi-Helmholtz Calderón Multiplicative Preconditioning for Higher-Order Global Multi-Trace Integral Equations

cs.CE math.NA ·2026-09-15 ·Cedric Münger, Alessandro Zuccotti, Van Chien Le, Kristof Cools
similarity 0.58
Abstract

The paper presents a higher-order global multi-trace integral equation for time-harmonic electromagnetic scattering by composite objects. The higher-order multi-trace formulation is preconditioned with a Calderón multiplicative preconditioner using higher-order quasi-Helmholtz projectors. The higher-order quasi-Helmholtz projectors separate the solenoidal and non-solenoidal components of the basis functions. Separate access to the Helmholtz components circumvents the explicit inversion of an ill-conditioned mixed Gram matrix. This enables the application of Calderón multiplicative preconditioning without refining the mesh and resorting to dual basis functions. Furthermore, it enables low-frequency stabilization, as the solenoidal and non-solenoidal components can be rescaled individually. The higher-order quasi-Helmholtz projectors are computed iteratively, enabling iterative solvers to efficiently solve the preconditioned matrix system, yielding accurate solutions in a few dozen iterations. Numerical experiments are conducted for composite dielectric bodies, confirming the effectiveness of the proposed preconditioner for the global multi-trace formulation discretized with higher-order basis functions for dense meshes and at very low frequencies

0.10

Maxwell's equations are universal for sparse linear algebra

cs.CC physics.optics ·2026-10-28 ·Yannick Augenstein
theorycode/dataunusual similarity 0.54
Abstract · 109 pages (18 pages main text, 91 pages Supplementary Information), 8 figures, 4 tables. v2: adds numerical illustrations (Fig. 3, SI Part V…

Optical and wave-based analog computing has re-emerged as a route to accelerating linear algebra, with metamaterials and photonic circuits shown to invert matrices and solve integral equations. However, it has remained unclear which problems such passive structures can represent, and at what cost, once encoding, precision, conditioning and readout are accounted for. Here, we show that every polynomially conditioned sparse linear system can be compiled into a three-dimensional dielectric -- a cavity filled with lossless, isotropic material of bounded permittivity -- whose time-harmonic response encodes its solution. For $m$ nonzero coefficients, the volume of the structure and the cost of writing it down and reading out the answer scale as $\tilde O(m^{3/2})$, coefficients require only $O(\log m)$ bits, and every field that approximately satisfies Maxwell's equations decodes to an approximate solution. We prove the construction for the continuum equations and give a computer-assisted version for the Yee discretization underlying finite-difference solvers. Read in reverse, it implies that electromagnetic simulation is, up to this overhead, as hard as general sparse linear algebra: a sufficiently fast general-purpose Maxwell solver would yield a faster sparse linear solver.

0.50

A Generalized Source Integral Equation for Homogeneous Penetrable Scatterers

cs.CE math.NAphysics.comp-ph ·2026-09-13 ·Boris Diner, Yaniv Brick
published similarity 0.52
Abstract · 5 pages, 6 figures, Submitted to IEEE Antennas and Wireless Propagation Letters

The generalized source integral equation (GSIE)approach is extended to enhance the compressibility of moment matrices for essentially-convex homogeneous penetrable scatterers. In the proposed indirect surface integral equation (SIE) formulation, the scattered field representations use a single distribution of generalized sources that radiate only weakly into the scatterer. A separate distribution of conventional sources is used for representing the interior fields. The wave interactions between surface subdomains via the generalized kernel are of a reduced effective dimensionality. The corresponding exterior integral operator moment matrix blocks exhibit enhanced rank deficiency. For lossy scatterers, this secures the low-rank (LR) compressibility of hierarchical matrix structures for the full system. For scatterers in a much slower background medium, significant savings with very delayed asymptotic scaling of the costs can be achieved. The GSIE is formulated for the transverse magnetic (TM) scattering problem. It is validated for representative examples and its superior compressibility is demonstrated.

0.40

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.51
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.39

Time-Domain Data-Driven Loewner Reduced-Order Models for Electromagnetic Simulation

eess.SP physics.comp-ph ·2026-10-15 ·Pablo Biurrun, Carlos J. Ramos-Salas, Luis D. Angulo, Valentin de la Rubia
similarity 0.51
Abstract

This paper presents a data-driven Loewner framework for constructing reduced-order models (ROMs) from time-domain electromagnetic (EM) simulation data. High-fidelity simulation of microwave devices can be computationally expensive, particularly when fine spatial discretization and long observation windows are required. The proposed method uses transient input-output data to construct Loewner and shifted Loewner matrices, from which a reduced descriptor realization is obtained through singular value decomposition (SVD). The resulting models are identified from a limited training window and used to predict responses over substantially longer time intervals, with prediction windows up to 50 times the duration of the training window. The method is formalized as an explicit, reproducible algorithm and validated against full-order simulations for four microwave structures: a substrate-integrated-waveguide filter, a frequency-selective surface, an evanescent-mode coaxial comb-line filter, and a diplexer. The results demonstrate the potential of Loewner-based identification to provide compact models of electromagnetic responses while reducing the need for repeated full-order simulation.

0.23

Stray Losses in Power Transformers: A Comparative Study of Modeling Frameworks for Mild Steel

eess.SY ·2026-11-03 ·Micha Swaanen, Timo Overboom, Siamak Pourkeivannour, Tom Huiskamp, Guus Pemen
benchmarkunusual similarity 0.50
Abstract · 13 pages, 18 figures. Submitted to IEEE Transactions on Magnetics

Accurately predicting eddy-current and hysteresis losses in mild steel components such as the structural parts and tank of power transformers remains a challenge in transformer design. Conventional numerical approaches for eddy-current loss analysis require discretization at a fraction of the skin depth. While accurate, such fine volumetric mesh becomes computationally prohibitive for large power transformers. Moreover, hysteresis loss is not always included in this analysis. To investigate the trade-off between computational cost and accuracy, this work presents a comparative analysis of eight distinct modeling frameworks for predicting both eddy-current and hysteresis losses in mild steel. These include efficient methods avoiding meshing, such as standard impedance boundary conditions, and more accurate approaches retaining full volumetric meshing, namely complex permeability, nonlinear single-valued B-H curve, and Jiles-Atherton hysteresis modeling. To accurately represent the material's electromagnetic behavior, the properties of the mild steel used are measured directly from samples. Finally, loss measurements are conducted to benchmark all eight frameworks, demonstrating mean absolute percentage errors between predictions and measurements generally below 20%.

0.33

Mixed-Dimensional Electromechanical Coupling of Embedded Beam Networks in Soft Dielectric Composites

cs.CE ·2026-09-28 ·L. River Spencer, Manuel K. Rausch, Chad Landis, Jan N. Fuhg
similarity 0.50
Abstract · 36 pages, 19 Figures

Soft electroactive composites can exhibit strongly architecture-dependent mechanical and electrical responses, but explicitly resolving dense fiber networks in three dimensions is computationally expensive. We develop a mixed-dimensional finite-element formulation in which electroactive fibers are represented by geometrically exact beams embedded in a deformable dielectric matrix. Unlike existing electroactive beam formulations in which the electric potential is defined directly on the beam, the embedded fibers here are driven by the three-dimensional electric field of the surrounding matrix. The matrix field is sampled along the beam centerlines and enters the beam dielectric enthalpy directly, providing two-way electromechanical coupling without introducing independent electric-potential degrees of freedom on the beams. Beam and matrix mechanics are coupled through projected mortar constraints, and the electromechanical problem is solved monolithically. We use the formulation as the microscale model in a periodic homogenization framework to compute effective stress and electric displacement. Verification studies quantify discretization and field-sampling sensitivity, followed by structured and irregular network examples that demonstrate architecture-dependent mechanical and electrical responses without body-fitted three-dimensional fiber meshes.

0.32

Extensible Programmatic Specification of Finite Element Methods

cs.MS cs.GRcs.PL ·2026-11-01 ·Theadora Fields Collin, Oded Stein, Gilbert Bernstein, Saman Amarasinghe
similarity 0.50
Abstract · 52 pages, 25 figures, including appendices

Finite element methods (FEMs) are a powerful and ubiquitous tool for solving engineering problems. Experimenting with different finite elements can improve the quality and efficiency of solutions. In some cases, the wrong (but nonetheless most common) choice of finite element will produce solutions which converge to the wrong answer regardless of mesh resolution. However, in practice, the choice of finite element is not explored due to the complexity of re-deriving and re-implementing finite element methods. Trying a new finite element is challenging because practitioners must manually deduce formulas to use these elements and implement them within a potentially complex system. We address this problem by introducing ElementForge, a finite element system that is parametric over the literate mathematical specification of a finite element in a domain-specific language (DSL). The ElementForge compiler reasons about tensor spaces, tensors, and tensor bases from first principles to derive implementations of finite elements. The ElementForge compiler is able to automatically derive implementations of finite elements previously only derived by hand. Further, ElementForge minimally couples several key mathematical concepts, mainly tensor fields, mesh topologies, sparse tensors, and assembled finite element operators, to produce a complete finite element system that is parametric over the choice of element. Consequently, the elements derived by the compiler can be applied parametrically to new meshes, PDEs, and boundary conditions. We evaluate our system by implementing several simulations with different finite elements, demonstrating that our system can explore tradeoffs in generality, accuracy, speed, and representational complexity. For example, we are able to implement the Morley, Bell, Argyris, and Hermite like elements with less than 50 lines of code and use them all in a single simulation.

0.29