CS Paper Radar

Stray Losses in Power Transformers: A Comparative Study of Modeling Frameworks for Mild Steel

Micha Swaanen, Timo Overboom, Siamak Pourkeivannour, Tom Huiskamp, Guus Pemen

eess.SY ·submitted 2026-11-03 16:02 UTC · v1
benchmarkunusual

Abstract

Accurately predicting eddy-current and hysteresis losses in mild steel components such as the structural parts and tank of power transformers remains a challenge in transformer design. Conventional numerical approaches for eddy-current loss analysis require discretization at a fraction of the skin depth. While accurate, such fine volumetric mesh becomes computationally prohibitive for large power transformers. Moreover, hysteresis loss is not always included in this analysis. To investigate the trade-off between computational cost and accuracy, this work presents a comparative analysis of eight distinct modeling frameworks for predicting both eddy-current and hysteresis losses in mild steel. These include efficient methods avoiding meshing, such as standard impedance boundary conditions, and more accurate approaches retaining full volumetric meshing, namely complex permeability, nonlinear single-valued B-H curve, and Jiles-Atherton hysteresis modeling. To accurately represent the material's electromagnetic behavior, the properties of the mild steel used are measured directly from samples. Finally, loss measurements are conducted to benchmark all eight frameworks, demonstrating mean absolute percentage errors between predictions and measurements generally below 20%.

Comment
13 pages, 18 figures. Submitted to IEEE Transactions on Magnetics

Closest papers

Nearest neighbours by meaning across the whole index.

The norm, not the labels: training and evaluating finite-element surrogates for stress analysis in the energy norm

cs.CE cs.LG ·2026-11-09 ·Ruifeng Cao, Xidan Song
similarity 0.53
Abstract · 45 pages, 6 figures; supplementary material (37 pages, 4 figures) appended

Finite-element surrogates predict the stresses of a new design in one evaluation, but are usually trained on solutions with a displacement loss and compared by it, although engineering decisions rest on stresses. Application in engineering: stress analysis of perforated plates and solids with cavities, parametric families in which holes concentrate stress. Contribution to artificial intelligence: training and evaluating such surrogates in the energy norm, with or without solutions, and screening their predictions without solutions. For linear elastostatics, minimising the assembled discrete potential energy is exactly supervised regression in this norm: the energy gap of a prediction is the strain energy of its stress error. A displacement loss under-weights the stiff modes that carry the strains. In pre-registered comparisons, changing only the norm of the supervised loss cut a three-dimensional transformer's median energy-norm error 7.5-fold and its median von Mises error 6.1-fold; in two dimensions it more than halved the von Mises error, also on held-out instances. In three dimensions, the transformer trained on the energy alone came within a factor of 1.3 of the energy-norm-supervised one in median energy-norm and von Mises error. It was more accurate than the displacement-supervised one on all five metrics in every seed. Given the stiffness matrix, a Ritz projection was more accurate than the label-free transformer, in the seed means, on every metric but peak stress. No network transferred to a substantially finer mesh. The energy ranks predictions of a load case, and its sign flags those worse than the zero field.

0.47

A Geometrically Parameterized Quasi-Stationary 3D Model for High-Frequency Induction Tube Welding

cs.CE physics.comp-phmath.NA ·2026-09-10 ·Dmitry Ivanov, John Inge Asperheim, Bjørnar Grande, Prerana Das
code/dataunusual similarity 0.51
Abstract · 26 pages, 14 figures

A three-dimensional multiphysics finite element model for the simulation of high-frequency induction welding of tubes is presented. The model couples a time-harmonic $h-φ$ formulation with a stabilized quasi-stationary advection-diffusion heat transport equation, enabling accurate prediction of electromagnetic and thermal fields under industrial operating conditions. The model incorporates parameterized geometry generation and semi-automated, physics-tailored mesh construction and is implemented using the open-source tools GetDP and Gmsh. Validation against measurements from a commercial induction welding line for AISI 304 stainless steel tubes demonstrates good agreement with operating data. The validated model is subsequently applied to investigate the influence of impeder material by comparing a conventional FeNiZnV ferrite with the soft magnetic composite Ferrotron 559H for the induction welding of AISI 304 stainless steel tubes.

0.42

CAHR-Net: Condition-Adaptive Hysteresis Reconstruction for Compact and Interpretable Magnetic Core Loss Modeling

cs.LG ·2026-09-02 ·Chunye Gong, Cong Yao
publishedunusual similarity 0.50
Abstract · 10 pages, 6 figures, 5 tables

Magnetic core loss originates in the hysteresis loop: the energy dissipated per excitation cycle equals the loop area, and frequency, temperature, and waveform shape set the loss by reshaping the loop geometry. Most existing models let these conditions act only on a terminal scalar - empirical equations fold them into fitted exponents, and data-driven predictors append them to encoded features - so no intermediate hysteresis representation remains for the conditions to reshape. This paper proposes CAHR-Net, a condition-adaptive hysteresis reconstruction network that injects the operating conditions where they physically act. It preserves the interpretable chain from flux density waveform to magnetic field reconstruction, loop-area integration, and power loss estimation, and uses feature-wise linear modulation to inject frequency, temperature, and waveform statistics into the intermediate reconstruction representation. A matched large-batch training protocol based on AdamW, cosine scheduling, and a staged reconstruction-to-power-loss objective is also reported, because the modulation pathway takes effect only within it. On the MagNet final A-E material protocol, CAHR-Net attains an average p95 relative error of 6.89% with only 1874 parameters, the lowest among all compared methods, together with a lower worst-material p95 than the strongest black-box solution at about 48x fewer parameters; it reduces the average p95 of the physical reconstruction backbone from 7.47% to 6.89% and the p95 of material D, the most difficult material, from 16.40% to 14.87%. Ablation and condition-slice analyses attribute the improvement to the coupling of physical loop reconstruction, structured condition modulation, and the matched optimization trajectory.

0.63

A Hierarchically Compressed Immittance Operator Formulation for Fast Statics-to-Full-Wave Electromagnetic Simulation with the Boundary Element Method

cs.CE physics.comp-ph ·2026-11-16 ·Shashwat Sharma
similarity 0.50
Abstract · 15 pages, 12 figures. Submitted to the IEEE Transactions on Antennas and Propagation

The boundary element method allows the electromagnetic simulation of three-dimensional problems with a two-dimensional discretization, using a surface integral representation of Maxwell's equations. For applications involving broadband simulations or multiscale geometries, the well-known low-frequency breakdown of conventional integral equation formulations must be addressed, while ensuring that dielectric, semiconducting, and lossy metallic regions are modeled rigorously, including the skin effect. In this work, a new boundary element formulation based on an immittance operator is proposed, where the underlying integral equations are inherently valid from statics to the full-wave regime. To enable efficient matrix assembly and solution, a hierarchical matrix compression strategy is devised, leveraging fast direct factorization as an intermediate step, and fast matrix-vector products for the iterative solution of the final system of equations. The proposed formulation is capable of electrostatic, magnetostatic, quasistatic, and full-wave simulations of dielectrics, semiconductors, and lossy metals. Representative numerical examples drawn from a variety of applications demonstrate the accuracy and efficiency of the proposed method.

0.30

Noninvasive Anisotropic Identification of Magnetic Properties in Toroidal Shaped Magnetic Steel

eess.SY cond-mat.mtrl-sciphysics.app-ph ·2026-09-07 ·Xusen Qin, Reza Zeinali, Mitrofan Curti
unusual similarity 0.50
Abstract

This research proposes a model-free inverse approach for identifying the nonlinear anisotropic single-valued magnetic constitutive characteristics of soft magnetic materials from boundary measurements. Using the harmonic approximation, the internal magnetic flux density B and magnetic field strength H are independently reconstructed from the measured boundary data, thus avoiding the limitation of using a predefined parametric B--H mapping function. Subsequently, the reconstructed fields are spatially averaged along selected collection lines to recover the B--H characteristics of the principal directions. Numerical results demonstrate high reconstruction accuracy for unperturbed data and good robustness against Gaussian perturbations of the boundary measurements, with the overall mean error remaining below 5% for a 10% noise level. These results indicate that under the harmonic-field assumptions, the field-based reconstruction provides a simple and computationally efficient framework for non-invasive identification of nonlinear anisotropic magnetic constitutive characteristics.

0.26

Explainable Machine Learning for Multilayer Planar Winding Inductance Estimation

cs.LG ·2026-09-29 ·Spyros Rigas, Theofilos Papadopoulos, Georgios Alexandridis, Antonios Antonopoulos
code/data similarity 0.49
Abstract · 10 pages

Rapid and accurate self-inductance estimation for multilayer rectangle-shaped planar windings is essential for modern high-frequency power converters, yet traditional workflows rely on complex mathematical equations, rigid monomial formulas or unexplainable black-box machine learning (ML) models that degrade severely outside their training domain. This paper introduces an explainable ML framework unifying post-hoc feature attribution (SHAP and permutation importance) with Kolmogorov-Arnold Network-guided symbolic regression via the SR-KAN framework to discover closed-form analytical equations without prior structural assumptions. Evaluated on a new open-source dataset of over 10,000 Finite Element Analysis (FEA) simulations across seven out-of-distribution (OOD) classes, standard tree-based ensembles exhibit severe extrapolation errors (> 36%), whereas the unconstrained SR-KAN expression achieves a robust OOD relative error of 8.22%. Experimental verification across 55 physical printed circuit board prototypes (up to 8 layers, with inductances from 4.11 μH to 559.27 μH) confirms that the KAN-discovered expression translates effectively to real-world hardware, predicting inductance with a mean absolute relative error of 6.26%. To support reproducible research, the complete FEA simulation dataset and prototype measurements are released open-source.

0.37

Cross-Material Magnetic Core Loss Prediction via Operating-Condition Matching and Partial Optimal Transport

cs.LG ·2026-10-10 ·Cong Yao, Yu Zheng, Zehao Hou, Rui Xu
similarity 0.49
Abstract · 11 pages, 9 figures, 6 tables

Cross-material magnetic core loss prediction requires adapting to new material responses with limited measurements. Global feature alignment overlooks differences in source and target excitation coverage. This motivates selecting comparable samples and controlling each source measurement's alignment contribution. This paper proposes T-PCOT, a Transformer transfer method based on condition-supported partial optimal transport. Frequency, flux excursion, temperature, and waveform descriptors define a sparse graph of comparable operating conditions. A capacity-constrained transport plan distributes alignment across source measurements and leaves costly target mass unmatched. The plan is constructed from measured inputs before training and guides local waveform-feature consistency. An importance-weighted sampling scheme preserves both uniform source regression and the transport objective during minibatch optimization. Experiments on three material pairs and three target label budgets show that T-PCOT reduces mean relative error (MRE) and 95th-percentile error (P95) relative to Transformer-based multiple-kernel maximum mean discrepancy (T-MKMMD) in all nine comparisons. Macro MRE decreases from 12.60% to 9.65%, and macro P95 from 30.94% to 25.06%, corresponding to relative reductions of 23.41% and 19.01%. Controlled comparisons and ablations examine the roles of input processing, condition correspondence, and source capacity. The results demonstrate the predictive advantage of organizing cross-material alignment through operating-condition support over the compared global alignment method. The proposed method achieves state-of-the-art predictive performance in magnetic core loss transfer learning.

0.18

Virtual Temperature Sensors in Power Transformers Using Neural Ordinary Differential Equations

cs.LG ·2026-08-13 ·Berk Hadzhamolla, Alexander Johannes Stasik, Signe Riemer-Sørensen
published similarity 0.48
Abstract

Accurate modeling and forecasting of power transformer thermal behavior are critical for reliability, asset lifetime, and optimized power system operation. Numerical approaches such as finite element methods (FEM) and computational fluid dynamics (CFD) offer high fidelity but are computationally expensive, require complex mesh generation, and are often impractical for real-time or large-scale applications, particularly when transformer geometries are unknown. Lumped-parameter thermal models are more practical but depend on transformer-specific thermal constants and may fail to capture dynamic responses under varying operating and environmental conditions. Purely data-driven machine learning methods, including artificial neural networks, convolutional neural networks, and long short-term memory (LSTM) networks, have shown success in forecasting transformer temperatures but typically require large volumes of high-quality training data and may produce physically inconsistent or uninterpretable results. This paper develops a physics-aware Neural Ordinary Differential Equation (Neural ODE) framework for forecasting transformer thermal behavior from real-world time-series data. Neural ODEs model system dynamics in continuous time, providing smooth trajectory prediction and a natural representation of continuously evolving thermal dynamics. A key contribution is the integration of simplified heat-transfer equations directly into the Neural ODE formulation. The model is evaluated across datasets from fifteen transformers in different regions of Norway with varying designs and cooling mechanisms. The results demonstrate that the developed Neural ODE framework provides a standardized, physics-aware, and robust forecasting approach for heterogeneous transformer units.

0.58