CS Paper Radar

Noninvasive Anisotropic Identification of Magnetic Properties in Toroidal Shaped Magnetic Steel

Xusen Qin, Reza Zeinali, Mitrofan Curti

eess.SY cond-mat.mtrl-sciphysics.app-ph ·submitted 2026-09-07 13:33 UTC · v2
unusual

Abstract

This research proposes a model-free inverse approach for identifying the nonlinear anisotropic single-valued magnetic constitutive characteristics of soft magnetic materials from boundary measurements. Using the harmonic approximation, the internal magnetic flux density B and magnetic field strength H are independently reconstructed from the measured boundary data, thus avoiding the limitation of using a predefined parametric B--H mapping function. Subsequently, the reconstructed fields are spatially averaged along selected collection lines to recover the B--H characteristics of the principal directions. Numerical results demonstrate high reconstruction accuracy for unperturbed data and good robustness against Gaussian perturbations of the boundary measurements, with the overall mean error remaining below 5% for a 10% noise level. These results indicate that under the harmonic-field assumptions, the field-based reconstruction provides a simple and computationally efficient framework for non-invasive identification of nonlinear anisotropic magnetic constitutive characteristics.

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.55
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

Stray Losses in Power Transformers: A Comparative Study of Modeling Frameworks for Mild Steel

eess.SY ·2026-11-03 ·Micha Swaanen, Timo Overboom, Siamak Pourkeivannour, Tom Huiskamp, Guus Pemen
benchmarkunusual similarity 0.50
Abstract · 13 pages, 18 figures. Submitted to IEEE Transactions on Magnetics

Accurately predicting eddy-current and hysteresis losses in mild steel components such as the structural parts and tank of power transformers remains a challenge in transformer design. Conventional numerical approaches for eddy-current loss analysis require discretization at a fraction of the skin depth. While accurate, such fine volumetric mesh becomes computationally prohibitive for large power transformers. Moreover, hysteresis loss is not always included in this analysis. To investigate the trade-off between computational cost and accuracy, this work presents a comparative analysis of eight distinct modeling frameworks for predicting both eddy-current and hysteresis losses in mild steel. These include efficient methods avoiding meshing, such as standard impedance boundary conditions, and more accurate approaches retaining full volumetric meshing, namely complex permeability, nonlinear single-valued B-H curve, and Jiles-Atherton hysteresis modeling. To accurately represent the material's electromagnetic behavior, the properties of the mild steel used are measured directly from samples. Finally, loss measurements are conducted to benchmark all eight frameworks, demonstrating mean absolute percentage errors between predictions and measurements generally below 20%.

0.33

Maxwell-Consistent 3-D Magnetic Field Camera using Scalar-Potential-Based Reconstruction

eess.SP ·2026-10-29 ·Paul Jürß, Marija Boberg, Philip Suskin, Tobias Knopp, Fynn Foerger
published similarity 0.48
Abstract · Accepted at IEEE Sensors 2026

Various applications require accurate 3-D characterization of magnetic fields with high spatial and temporal resolution. Building on our previously introduced spherical magnetic field camera employing 86 three-axis Hall sensors arranged on a spherical surface, we present a novel magnetic-field reconstruction approach based on the magnetic scalar potential and its spherical harmonic expansion. Unlike the previous reconstruction method that expands each vector component separately, our scalar-potential-based formulation is inherently consistent with Maxwell's equations for source-free fields by design, yielding curl-free and divergence-free field models. Using a simulated magnetic gradient field generated by two permanent magnets, we demonstrate that the proposed method achieves higher reconstruction accuracy, improved robustness to sensor noise and failure, and substantially reduced non-physical divergence and curl compared to the component-wise baseline. Furthermore, the scalar-potential approach attains superior performance with fewer coefficients, indicating a more efficient use of measurement data allowing higher-degree polynomial representations.

0.38

A hybrid CNN-adjoint optimization framework for reconstruction of viscoelastic tissue properties in magnetic resonance elastography

cs.LG math.OCmath.NA ·2026-10-02 ·Anwesa Dey, Johann Rudi, Elena Cherkaev
similarity 0.47
Abstract

Magnetic resonance elastography (MRE) is a noninvasive imaging modality for quantifying the viscoelastic properties of soft tissues from shear wave propagation. Recovering the complex-valued shear modulus from measured displacement fields leads to a severely ill-posed inverse problem, particularly in the presence of noise and limited boundary excitations. We investigate adjoint-based optimization, convolutional neural network (CNN) reconstruction, and a hybrid framework combining both approaches. The forward model is based on a scalar form of the modified stationary Stokes system with a complex shear modulus. We establish well-posedness of the forward problem, existence of minimizers, and first-order optimality conditions for the adjoint-based formulation, and implement a nonlinear conjugate-gradient method with Armijo line search. While PDE-constrained optimization can accurately refine coefficient reconstructions, its performance depends strongly on initialization. We therefore construct a two-dimensional CNN that maps complex-valued displacement measurements to spatially varying complex shear modulus fields and provides rapid, informative initial reconstructions. The proposed hybrid method uses the CNN reconstruction to initialize the adjoint-based optimization, yielding faster convergence and improved accuracy. The CNN is trained on coefficient fields containing individual perturbations and tested on both individual and previously unseen combined configurations. Numerical experiments demonstrate that the CNN generalizes to these more challenging configurations, while subsequent PDE-constrained optimization further refines the reconstructed coefficient. These results demonstrate the potential of combining data-driven initialization with physics-based optimization for efficient and accurate MRE reconstruction.

0.12

Inferring physical fields in coupled systems with unknown parameters from incomplete observations using physics-constrained attentive neural operators

cs.LG math.NA ·2026-10-05 ·Shilun Wei, Xiaoqiang Sun, Wei Li, Kejun Tang
similarity 0.47
Abstract

Given incomplete measurements of a single physical field in a coupled system with unknown parameters, can we infer its full physical state and identify the underlying parameters? This problem is challenging because multiple coupled fields must be reconstructed simultaneously from limited observations of only one, while the system parameters are unknown. In this work, we propose a machine learning framework for full-field reconstruction and parameter identification of unknown physical systems from sparse observations of a single physical field. Specifically, the cross-attention encoder propagates sparse sensor observations onto a regular grid to construct a sensor-conditioned latent representation, while a Fourier neural operator (FNO) decoder captures global spatial dependencies to reconstruct all coupled physical fields. The network parameters and unknown physical parameters are jointly optimized by minimizing observation losses, governing equation residuals, and boundary/initial condition constraints. The proposed approach is validated on two- and three-dimensional lid-driven cavity flows, a two-dimensional cylinder wake, and a two-dimensional non-ideal magnetohydrodynamics problem, demonstrating the recovery performance of unobserved fields and physical parameters from incomplete observations.

0.27

Generating Accurate Microstructures of Anisotropic Magnetorheological Elastomers

cs.CE ·2026-10-14 ·Heinrich T. Roth, Lukas Jabs, Matti Schneider, Konstantin Gerstenberger, Günter K. Auernhammer +2 more
similarity 0.47
Abstract

Anisotropic magnetorheological elastomers are magnetoactive smart materials whose complex magneto-mechanical behavior is strongly influenced by their underlying microstructure. Efficient and accurate multiscale simulations of these materials rely on small unit cells that reproduce the behavior of the real material. In this work, we present a framework for the generation and validation of such two-dimensional representative volume elements (RVEs) from a given microstructure image, assuming circular particles. The cells are generated through an optimization procedure where the two-point correlation function serves as a differentiable descriptor, while a minimum inter-particle distance is enforced as a constraint. To assess the equivalence of the generated cells, we compare their effective magneto-mechanical response with those of the reference microstructure. We demonstrate that the generated cells reproduce the reference response with high accuracy, also with substantially fewer particles. Consequently, the computational cost of subsequent multiscale simulations is reduced.

0.26

Adapting neural operators for mechanics decisions under changing operating conditions

cs.CE cs.LGmath.NA ·2026-09-27 ·Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson
similarity 0.47
Abstract · 33 pages, 16 figures

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

0.36

Data-Driven Localization of Magneto-Mechanical Resonators from Time Signals

eess.SP ·2026-10-21 ·Artyom Tsanda, Konrad Scheffler, Sarah Reiss, Jonas Faltinath, Janik Bach +4 more
similarity 0.46
Abstract

Magneto-mechanical resonators (MMRs) are a recently introduced sensor technology for tracking and sensing applications that enables effective miniaturization down to the millimeter regime. However, estimating sensor parameters such as position from raw signals remains computationally challenging, because it requires solving a nonlinear inverse problem with computationally demanding objective function evaluations. In this work, we show how a deep learning method can accelerate this process by directly learning the inverse mapping from the measured signals. We consider the localization problem as an example and show that a convolutional-transformer regressor trained on simulated data with recorded noise can generalize to experimental data. The method achieves a median Euclidean distance error of 7 mm, which is comparable to the size of the sensor and corresponds to 6% of the size of a single coil. These results suggest that deep learning is a promising approach for rapid estimation of MMR parameters.

0.22