CS Paper Radar

Generating Accurate Microstructures of Anisotropic Magnetorheological Elastomers

Heinrich T. Roth, Lukas Jabs, Matti Schneider, Konstantin Gerstenberger, Günter K. Auernhammer, Karl A. Kalina, Markus Kästner

cs.CE ·submitted 2026-10-14 14:43 UTC · v1

Abstract

Anisotropic magnetorheological elastomers are magnetoactive smart materials whose complex magneto-mechanical behavior is strongly influenced by their underlying microstructure. Efficient and accurate multiscale simulations of these materials rely on small unit cells that reproduce the behavior of the real material. In this work, we present a framework for the generation and validation of such two-dimensional representative volume elements (RVEs) from a given microstructure image, assuming circular particles. The cells are generated through an optimization procedure where the two-point correlation function serves as a differentiable descriptor, while a minimum inter-particle distance is enforced as a constraint. To assess the equivalence of the generated cells, we compare their effective magneto-mechanical response with those of the reference microstructure. We demonstrate that the generated cells reproduce the reference response with high accuracy, also with substantially fewer particles. Consequently, the computational cost of subsequent multiscale simulations is reduced.

Closest papers

Nearest neighbours by meaning across the whole index.

From Sparse AFM Observations to Probabilistic Macroscale Mechanics: A Generative-Physics Framework for Plant Cell Walls

cs.CE ·2026-10-05 ·Samundra Karki, Angona Biswas, Nabila Masud, Md Hasibul Hasan Hasib, Anwesha Sarkar +1 more
similarity 0.54
Abstract · 28 pages (16 main + 12 supplementary), 10 figures. Supplementary material (5 figures, 6 tables) included at the end

Nanoscale imaging of developing plant cell walls is expensive, and a limited number of atomic force microscopy (AFM) scans cannot capture the full structural variability of the wall. We present a generative-physics workflow that links sparse AFM observations of cotton (Gossypium hirsutum) fiber cell walls at 8 days post-anthesis (DPA) to distributions of effective elastic properties and a larger-scale mechanical response. We adapt a Stable Diffusion model with Low-Rank Adaptation (LoRA) to expand the experimental scans into an ensemble of AFM-like microstructures and assess the synthetic structures using microfibril crossover count and crossover angle. Each microstructure is mapped to spatially varying Young's modulus and Poisson's ratio fields and analyzed using strain-controlled finite element homogenization. Repeating this process across the image ensemble and a prescribed sweep of matrix-to-fibril stiffness ratios produces distributions of effective Young's modulus and Poisson's ratio. A single constitutive pair cannot capture this variation. The resulting distributions depend strongly on the matrix-to-fibril stiffness ratio and, in several cases, exhibit apparent multimodality. We further propagate the paired effective properties into 20 stochastic realizations of a tensile simulation of a larger specimen, yielding a distribution of macroscale stress response. The framework provides a probabilistic link between sparse nanoscale observations and continuum-scale mechanics while retaining variability across scales. The present results establish the computational workflow, while calibration of the intensity-to-property mapping against nanomechanical measurements remains necessary for quantitative prediction at the fiber scale.

0.31

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.51
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.50
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27

Gaussian Splatoms: Direct Atomic Structure Identification in Electron Tomography

eess.IV cs.CV ·2026-11-17 ·Nalini Singh, Tiffany Chien, Cedric Lim, Arthur R. C. McCray, Colin Ophus +1 more
similarity 0.49
Abstract · 26 pages, 14 figures

Atomic electron tomography (AET) computationally reconstructs the 3D atomic structure of materials from a series of 2D projection measurements acquired at different tilt angles. Inspired by Gaussian splatting techniques from computer vision, we introduce an atom-centric parameterization for modeling AET samples. Instead of a conventional volumetric representation with a grid of voxels, we model the sample as a list of atoms, where each atom is a 3D Gaussian characterized by learned location, scale, and amplitude. The Gaussian model is a natural fit for atoms that allows us to easily incorporate prior information grounded in physics; we impose isotropy of atoms, a minimum interatomic distance, and realistic atomic radii. We show in simulation that our method is more robust than volumetric baselines to real-world imaging challenges, including a limited number of measurements and low electron dose. We further show that our method yields a more physically plausible reconstruction of an experimental 23,000 atom iron-platinum nanoparticle than a previously published volumetric reconstruction. Beyond tomography, our representation is a promising tool for any atomic resolution imaging modality (e.g. multislice electron ptychography).

0.31

CROPS: Cosserat-Rod-Based Co-Design of Soft Slender Programmable Material Systems for Biomedical Applications

cs.CE cs.RO ·2026-10-16 ·Aaditya Chandrasekhar, Dex Doksoo Lee, Hyunwoo Kwon, Shicheng Li, Wei Chen
similarity 0.48
Abstract · Submitted to Finite Elements in Analysis and Design

Slender structures made of stimuli-responsive materials represent an emerging class of programmable material systems, with applications in soft robotics, minimally invasive surgery, wearable electronics, and deployable structures. In biomedical applications, the on-demand design of slender structures, encompassing both their material layout and actuation, is essential to harnessing their large deformation and multiphysics actuation to meet patient-specific design requirements. However, owing to geometric and material nonlinearities, their structure-actuation-response relationship is highly nonintuitive and computationally demanding. This often makes trial-and-error and conventional design approaches challenging for addressing patient-specific needs. To this end, we present a Cosserat-rod-based design optimization framework for the autonomous design of programmable slender structures. Leveraging the Cosserat rod representation, the end-to-end differentiable framework is demonstrated on two case studies: (i) design of swellable stents that morph to the shape of carotid vessels; (ii) co-design of the remnant magnetization and the applied field of magnetically-active catheters to reduce the force exerted on the patient-specific vessel wall during insertion. Both self-contact and external contact with surrounding structures are accounted for. We consider two actuation mechanism, namely the swelling of gel-elastomer composites and the magnetic actuation of hard-magnetic composites. The proposed framework presents an autonomous design platform of soft slender material systems that support large deformations and multiphysics actuation toward personalized biomedical design.

0.25

MagPillar: A Soft Magnetopillar Array Tactile Sensor for Robotic Surface Perception

cs.RO ·2026-11-01 ·Haotian Guo, Yu Feng, Hao Wu, Jiazhi Tang, Ningbin Zhang +1 more
similarity 0.48
Abstract

Robotic surface exploration benefits from tactile interfaces that accommodate contact and capture variations in surface characteristics. Herein, we report MagPillar, a tactile sensor inspired by spider tactile hairs that combines a magnetic pillar array with three-axis Hall sensing. A full-array mechanical and magnetic-field model characterizes how pillar deformation affects the superposed fields measured across the array, providing a physical basis for interpreting its contact responses. The compliant pillar architecture translates contact with surface textures and geometric features into distinct magnetic response patterns. Then, in robotic surface perception experiments, spectral features and logistic regression distinguish six material surfaces with an offline accuracy of 99.34% under within-session temporally blocked cross-validation. Continuous scans over periodic protrusions produce amplitude and peak-spacing variations consistent with changes in surface geometry. These findings connect compliant contact mechanics with distributed magnetic sensing, paving a new path for material recognition and qualitative surface-profile perception.

0.35

iLogMap: Geodesic Polar Coordinates Parameterization with the Magnetic Laplacian

cs.CG ·2026-09-09 ·Tomás Banduc, Simone Pezzuto, Francisco Sahli Costabal
similarity 0.48
Abstract

Geodesic polar coordinates (GPCs) provide an intrinsic parameterization over curved surfaces, but their accurate estimation remains challenging, particularly in the presence of anisotropic metrics, high curvature and complex topology. We introduce iLogMap, a method for computing GPCs in curved domains that recasts the angular component of the logarithmic map to a ground-state magnetic eigenproblem over the circumferential direction field of geodesic distance. Our method effortlessly extends to anisotropic metric tensors and solid volumes, enabling cylindrical and spherical parameterizations in tetrahedral meshes. Experiments on diverse shapes with varying genus confirm competitive angular accuracy and reduced metric distortion relative to heat-based methods, with improved performance on surfaces with boundary and domains with anisotropy. We demonstrate the utility of iLogMap in computational cardiology applications, where we use it to initialize spiral phases on atrial surfaces and estimate local activation patterns in ventricular models.

0.26

Crystal-structure design by agentic AI in a language of motifs

cs.LG cond-mat.mtrl-sci ·2026-08-16 ·Dinh-Khiet Le, Minh-Quyet Ha, Hong-Phuc Vu-Dinh, Viet-Cuong Nguyen, Huan Tran +4 more
similarity 0.47
Abstract

Data-driven materials discovery interpolates more reliably than it extrapolates and seldom reveals new structure types. We present MatEvolve, an agentic-AI framework that designs crystals in an interpretable \emph{language of motifs}, in which each crystal is written as a \emph{motif profile} that describes the recurring geometric patterns---the \emph{motifs}---composing the crystal. The motif profile serves not merely as a description of a material but as the medium for material design: the agent edits the profile with a stated rationale and constructs a crystal from the modified one; the most promising candidates are then validated by first-principles calculations. MatEvolve is built on the state-of-the-art language model Claude Fable~5 without fine-tuning. It is applied to the design of rare-earth-lean permanent-magnet compounds and finds novel (meta)stable crystals that are both new structural prototypes and magnet compounds; under an equal validation budget, it does so an order of magnitude more often than generative models. Beyond design, analyzing the human-readable profiles of the discovered crystals reveals their structure--property relationships.

0.04