CS Paper Radar

MagPillar: A Soft Magnetopillar Array Tactile Sensor for Robotic Surface Perception

Haotian Guo, Yu Feng, Hao Wu, Jiazhi Tang, Ningbin Zhang, Jianshu Zhou

cs.RO ·submitted 2026-11-01 05:53 UTC · v2

Abstract

Robotic surface exploration benefits from tactile interfaces that accommodate contact and capture variations in surface characteristics. Herein, we report MagPillar, a tactile sensor inspired by spider tactile hairs that combines a magnetic pillar array with three-axis Hall sensing. A full-array mechanical and magnetic-field model characterizes how pillar deformation affects the superposed fields measured across the array, providing a physical basis for interpreting its contact responses. The compliant pillar architecture translates contact with surface textures and geometric features into distinct magnetic response patterns. Then, in robotic surface perception experiments, spectral features and logistic regression distinguish six material surfaces with an offline accuracy of 99.34% under within-session temporally blocked cross-validation. Continuous scans over periodic protrusions produce amplitude and peak-spacing variations consistent with changes in surface geometry. These findings connect compliant contact mechanics with distributed magnetic sensing, paving a new path for material recognition and qualitative surface-profile perception.

Closest papers

Nearest neighbours by meaning across the whole index.

MagCilia: A Compact Magnetociliary Tactile Sensor with 3D Force Sensing for Robotic Contact Perception and Grasping Feedback

cs.RO ·2026-10-07 ·Yu Feng, Hao Wu, Haotian Guo, Haoming Liu, William Su +5 more
highly cited similarity 0.73
Abstract

Robotic grasping and surface exploration benefit from simultaneous measurement of normal and tangential forces and from surface information obtained through contact. Here, we present a compact magnetociliary tactile sensor (MagCilia) that combines a flexible magnetic-cilia structure with a Hall sensor for 3D force sensing. Quasi-static finite element analysis is used to investigate structural deformation and magnetic responses under multidirectional loading. To reconstruct forces from the coupled magnetic channels, we propose causal history fusion regression (CHFR), which combines current magnetic-field measurements with their recent changes. Five-fold cross-validation grouped by calibration record yields root-mean-square errors of 0.40, 0.57, and 0.69 N for Fx, Fy, and Fz, respectively, with corresponding coefficients of determination of 0.93, 0.90, and 0.92. Robotic experiments demonstrate tangential-force-guided gripper adjustment and multi-axis load monitoring under external perturbations. Frequency-domain features of the reconstructed forces distinguish six surface categories with 99.39% accuracy in three-fold cross-validation grouped by acquisition session. An online robotic demonstration additionally identifies all six tested surfaces. These results demonstrate 3D force reconstruction, grasping feedback, and surface recognition using a single compact tactile unit.

0.58

A robust single-sensing-element tactile sensor for concurrent pressure and tackiness detection with real-time signal decoupling capability

cs.RO cond-mat.mtrl-sci ·2026-09-29 ·Ying Yang, Mingwei Gu, Jia-Sen Xie, Xingyu Ma, Yan-Na Lu +6 more
similarity 0.71
Abstract

Integrating tackiness sensation into the artificial skin of humanoid robots significantly enhances their cognitive and operational capabilities. However existing tactile sensors face challenges in decoupling of the multimodal signal and stability. Here we present a surface-soft tactile sensor that incorporates a Hall effect sensor and a soft magnetic composite within a robust elastic framework. The sensor surface indents under pressure and bulges prominently when retracted from sticky surfaces dynamically altering the Hall sensor-magnet distance. This generates whole-process-traceable and baseline-separated signals enabling real-time differentiation between pressure and pull-off force. This single-sensing-element design facilitates bimodal sensing at the same contact spot while eliminate stress cross-talk enhancing both accuracy and sensitivity. The fusion of a robust framework and magneto-mechanical sensing mechanism equips the sensor with exceptional reliability and excellent signal baseline stability. This tactile sensor holds substantial potential for advancing robotic capabilities in evaluating adhesive properties monitoring rubber aging precisely handling lightweight objects and cognizing natural objects surface characteristics.

0.20

Hall Effect-Based Tactile Force Detection Sensor for Robot-Assisted Minimally Invasive Surgery

cs.RO ·2026-10-07 ·Charles DeLorey, Michael Brockdorff, Adam Metcalf, Benjamin Calmé, Pietro Valdastri +1 more
similarity 0.64
Abstract · 9 pages, 12 figures

Robotic minimally invasive surgery has revolutionized surgical practice. However, as the surgeons are mechanically separated from the surgical tools, loss of tactile feedback occurs. We present a compact force sensor with three, millimeter scale sensing elements (taxels) that can be affixed to the grasping face of a robotic surgical tool. The sensor features a miniaturized design using Hall effect sensors and magnets embedded in a deformable elastomer contact layer. Sensor calibration is achieved with a 6 degree of freedom (DoF) parallel robot. Each taxel can detect applied normal and shear forces with average RMSE of 2.133 kPa. The calibrated sensor was validated on phantom and ex vivo porcine tissue, demonstrating tactile sensing during retraction as well as slip. This work introduces a small-scale Hall effect based tactile sensor, enabling sensing for force-sensitive robotic surgical applications.

0.17

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.62
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.61
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

Tactile Perception through Fluid-Solid Interaction

cs.RO cond-mat.soft ·2026-09-29 ·Arman Goshtasbi, Minke Berghuis, Aida Parvaresh, Saravana Prashanth Murali Babu, Robert W. Style +1 more
top venue similarity 0.59
Abstract

Soft tactile sensors elevate robotic touch through enhanced flexibility and adaptability, yet most existing designs depend on embedded electronics that are susceptible to interference and environmental limitations. In this work, we leverage fluid-solid interactions to develop a class of soft tactile sensors that operate entirely without electronics at the sensing site. The sensor comprises a fluid-filled elastomeric channel connected to only two external pressure sensors. Touching different regions of the elastomeric surface displaces the viscous fluid, producing distinct pressure patterns that encode both touch position and force. These signals are decoded through a machine learning framework that integrates feature extraction, soft clustering, and adaptive neuro-fuzzy inference to achieve accurate localization and force estimation. We validate this concept through single-point touch localization and force estimation in a linear (1D) sensor and extend the same sensing principle to 2D tactile mapping by routing the channel across the surface using space-filling curves, while maintaining the same minimal hardware setup. This simple approach remains effective in environments where conventional electronic sensors often fail, such as underwater or in the presence of magnetic interference.

0.57

Which Physical Tactile Cues Matter for Contact-Rich Imitation Learning? A Controlled Real-Robot Study

cs.RO ·2026-11-04 ·Xuhao Qin, Xiyan Huang, Haoyu Dong, Xi Zhang, Chenxi Xiao
published similarity 0.59
Abstract · 6 pages, 5 figures, 2 tables. Accepted to IEEE ROBIO 2026

Vision-based tactile sensors capture multiple aspects of physical interaction within a single image stream, including contact appearance, geometry, indentation depth, and tangential deformation. However, existing visuo-tactile policies often directly process tactile observations as images, making it difficult to determine which physical cues contribute to policy learning. This paper presents a controlled real-robot study that compares physically interpretable tactile signals using the LeRobot platform, enhanced with our visuo-tactile perception system. From the same tactile stream, we derive tactile RGB images, normal/depth maps, and marker-flow fields, representing contact appearance, geometry, and tangential deformation, respectively. Using identical task demonstrations and the same policy backbone, we evaluate the individual and combined contributions of these tactile cues. We further compare tactile encoders and visuo-tactile fusion strategies. Evaluation across 720 real-robot trials yields four key findings: (1) tactile perception substantially improves the overall success rate from 57.8% to 78.9%, although its contribution varies across task stages; (2) marker flow is the most effective individual cue, achieving a success rate of 74.4% and playing a particularly important role in regulating established contact; (3) cue-factorized encoding consistently improves performance, highlighting that different physical cues require tailored processing techniques; and (4) although the effectiveness of tactile fusion is task-dependent, cross-attention offers a lightweight solution with performance comparable to that of pretrained tactile encoders.

0.31

PCTac: Mechanochromic Photonic-Crystal Tactile Sensor for Dexterous Manipulation

cs.RO ·2026-11-09 ·Ruilin Zhang, Xuanshuo Liu, Junzhe Dai, Kefei Wu, Xuhao Qin +4 more
code/data similarity 0.59
Abstract · 9 pages, 7 figures

Modern visuotactile sensors primarily sense contact by imaging the deformation of a compliant interface. Using techniques such as photometric stereo, they can recover detailed contact geometry, often represented as surface normals or depth. However, force-related information typically still needs to be inferred indirectly through calibration, geometric reconstruction, or learned mappings. Mechanochromic photonic-crystal (PC) materials offer an alternative physical encoding mechanism: contact loading changes their periodic microstructure and spectral response, directly transforming local stress into a spatially resolved structural-color field. Despite this potential, PC materials have rarely been explored as visuotactile sensors for closed-loop robot learning. We present PCTac, an open-source mechanochromic PC fingertip that uses a dense hue field as its tactile observation. Loading characterization demonstrates a repeatable relationship between the applied normal load and the observed hue response. We further integrate this representation directly into a Diffusion Policy and evaluate it on three real-robot manipulation tasks. Across 90 physical rollouts, PCTac Hue achieves 68 successes (75.6\%), compared with 60 (66.7\%) for PCTac RGB, 57 (63.3\%) for Wedge RGB, and 29 (32.2\%) for vision-only. PCTac Hue also achieves the highest observed success rate on each evaluated task, including Perturbed Test-Tube Insertion, where it achieves 16/30 successes versus 13/30 for tactile RGB baselines and 1/30 for vision-only. These results demonstrate the potential of mechanochromic structural color as a compact, load-sensitive tactile representation for robot learning and closed-loop manipulation. Project page: https://bey0ndt1me.github.io/PCTac-page/.

0.26