CS Paper Radar

Uncertainty-Aware Continual Learning for 2D XRD Interpretation Using Simulated and Experimental Data

Zihan Wang, Hyun Sang Park, Ali Rachidi, David Elbert, Todd C. Hufnagel, Wei Chen

cs.LG stat.ML ·submitted 2026-11-12 22:08 UTC · v1

Abstract

Autonomous experimentation systems require characterization models that can interpret heterogeneous measurements and maintain predictive performance as data accumulate. Developing such models involves addressing domain mismatch between data sources, overconfident predictions on unfamiliar inputs, and catastrophic forgetting during sequential updates. In this work, we present a proof-of-concept framework for uncertainty-aware continual interpretation of two-dimensional X-ray diffraction (XRD) data. The framework integrates established components: maximum mean discrepancy-based domain adaptation to reduce simulation-to-experiment discrepancies, a convolutional neural network with a spectral-normalized neural Gaussian process (CNN--SNGP) for predictive uncertainty estimation, and replay with knowledge distillation for sequential model updating. We evaluate the framework using simulated and previously-collected experimental data for crystal structure classification of single-phase body-centered cubic, face-centered cubic, and hexagonal close-packed patterns. Data are organized into predefined sequential blocks to assess adaptation and retention of previously learned knowledge. Within this setting, the results show accurate classification across simulated and experimental data, improved alignment between the two domains, and reduced forgetting compared with naïve fine-tuning. Predictive uncertainty is also evaluated on unfamiliar and noisy inputs. The contribution is the integration and evaluation of these capabilities for sequential XRD interpretation. The framework provides a basis for future integration into autonomous experimentation systems, with experimental planning, instrument control, and closed-loop deployment remaining areas for future development.

Closest papers

Nearest neighbours by meaning across the whole index.

Knowledge-Driven XRD Phase Identification via Multi-View Retrieval and Explanation

cs.LG cond-mat.mtrl-sci ·2026-09-25 ·Doaa Mohamed, Markus Stricker
similarity 0.70
Abstract · 12 pages, 5 figures, conference proceeding

X-ray diffraction (XRD) is a experimental technique for determining the phase composition and structure of crystalline materials. However, interpreting XRD patterns is challenging, particularly in high-throughput materials discovery, where many novel materials may need to be characterized and no reference patterns are available. Consequently, machine learning is increasingly used to accelerate and automate the analysis while reducing errors associated with human interpretation. We propose a multi-decision framework for XRD phase analysis that integrates representation learning, similarity-based retrieval, and explainable decision support within a unified reference database. A convolutional autoencoder learns compact latent representations of XRD patterns that preserve structural similarity while remaining robust to variations arising from experimental noise and measurement conditions. By integrating multiple decision pathways within a shared latent space, the framework moves beyond single-label prediction toward ranked and interpretable phase analysis that mirrors expert practice. During inference, complementary decision mechanisms are applied, including latent-space classification and retrieval, explanation-guided similarity using Integrated Gradients, and composition-based similarity search. These mechanisms generate ranked candidate phase lists that are aggregated into a final prediction with an associated confidence score. Experiments on synthetic datasets demonstrate strong predictive performance, achieving 98.85\,\% accuracy for crystal system classification and 95.82\,\% accuracy for space group prediction on the test set, while maintaining robustness under realistic perturbations. The framework supports reliable, analyst-friendly identification of crystal phases and structures in high-throughput and exploratory materials discovery settings.

0.17

Exploring Joint-Embedding Predictive Architectures for Self-Supervised Representation Learning of Powder X-ray Diffraction Patterns

cs.AI cond-mat.mtrl-scics.LG ·2026-10-23 ·Ming-Chiang Chang, Brian DeCost
publishedhot direction similarity 0.68
Abstract · 8 pages, 6 figures, 1 table. Accepted by AAAI 2026 Fall Symposium Series Workshop "Parsimonious Scientific Machine Learning: Accelerating Sc…

Powder X-ray diffraction (XRD) is the primary high-throughput method for resolving crystal structures, a cornerstone of materials science. As high-throughput synthesis and self-driving laboratories advance, automated XRD pattern analysis has become vital for accelerating materials discovery. However, traditional matrix factorization methods fail when lattice variations cause non-linear peak shifts. At the same time, supervised learning approaches face a combinatorial explosion when handling multi-phase mixtures. To overcome these challenges, we adopt a self-supervised Joint Embedding Predictive Architecture (JEPA) to learn representation embeddings from 1D diffraction patterns. By optimizing a masked self-prediction loss directly within the latent space, the framework captures high-level crystallographic semantics. Downstream evaluations show that lightweight attentive probes trained on frozen JEPA representations achieve space group classification and lattice parameter estimation accuracy close to much larger supervised vision transformers. Furthermore, latent probing reveals that the learned representation space naturally organizes physical transformations, isolating smooth trajectories for peak broadening. Interestingly, decoding along latent paths between single-phase crystal representations yields realistic multi-phase mixture patterns, demonstrating an emergent continuous structure learned without explicit multi-phase supervision.

0.32

SPEAR: Structure Property Explainability with Attention Regularization

cs.LG cond-mat.mtrl-sci ·2026-08-13 ·Aditya Raghavan, Utkarsh Pratiush, Dalton A. Pearl, Jade Holliman, Katharine Page +2 more
similarity 0.65
Abstract

Machine learning is increasingly used to learn structure property relationships from spectroscopic and diffraction data, yet its adoption in materials discovery is often limited by poor interpretability of model predictions. Although attention mechanisms are frequently treated as inherently explainable, unregularized attention can yield unstable, fragmented, or intensity driven attribution patterns that obscure the physical origin of these relationships. Here we introduce SPEAR (Structure Property Explainability with Attention Regularization), a framework that constrains attention distributions during training to improve their stability, selectivity, and physical interpretability. SPEAR augments attention based regression with a learnable temperature that controls attention concentration and a smoothness penalty that enforces coherence across neighboring spectral positions, treating attention as a learnable explanatory object rather than a post hoc visualization. Using synthetic spectral benchmarks with known generative structure, we show that attention regularization produces smooth, contiguous attribution profiles aligned with causal features while preserving predictive accuracy. Applied to experimental X ray diffraction data from a combinatorial rare earth zirconate thin film library, the regularized model selectively emphasizes physically relevant diffraction features and decouples feature importance from raw peak intensity. The reflection it identified prompted a reassessment of our earlier structural analysis, revealing a correlation between the 220 peak position, the tetragonal distortion that accommodates cation size disorder, and the local thermal conductivity. Attention regularization therefore provides a principled training constraint for explainable structure property regression, yielding mechanistically meaningful explanations without sacrificing predictive performance.

0.04

Diagnosing and narrowing the simulation-to-real gap in powder X-ray diffraction with a wet-dry agentic loop

cs.MA cond-mat.mtrl-sci ·2026-08-23 ·Shaoguang Wang, Weiyu Guo, Ben Fei, Xiaohong Shao, Zhihui Wang +1 more
similarity 0.64
Abstract · The authors have determined that the manuscript in its current form has not yet reached the level of completeness and refinement intended fo…

Powder X-ray diffraction (PXRD) is the routine probe of crystalline matter, yet its analysis is the rate-limiting step as laboratories automate acquisition. Deep-learning analyzers excel on simulated patterns and degrade on measured ones. This simulation-to-real gap is structural, not additive: synthetic denoising gives no measurable lift on real spectra, whereas correcting a small peak-position drift more than doubles median retrieval correlation. Real-spectrum fine-tuning, peak-aligned reranking, and recalibration narrow what remains and restore the coverage synthetic anchors lose. Xtalyst integrates these in an agent-orchestrated system spanning phase identification, refinement, and calibrated property prediction. On a frozen held-out partition (n=534) each module measured on both splits reproduces its development finding -- including the synthetic-anchor under-coverage, whose magnitude differs between the two pools -- while held-out refinement converges and preserves symmetry without reaching profile-quality fits, and on a diffractometer its wet-dry recommend-rescan-reanalyze loop flips a blinded silicon standard to a gated PASS and changes which minor phase is resolved on a multi-metal alloy.

0.26

A self-learning scientific agent for X-ray diffraction

cs.AI cond-mat.mtrl-scics.LG ·2026-10-06 ·Bin Cao, Huichi Zhou, Runyu Yang, Jingsong Li, Shuchen Sun +5 more
similarity 0.63
Abstract

A central challenge for scientific agents is to turn analytical experience into reusable expertise grounded in physical evidence. Here we introduce Gan Jiang, a self-learning agent for powder X-ray diffraction built on a diffraction-analysis ecosystem we developed: XMatcher, XQueryer, XDecomposer and WPEM. Together, these engines span phase identification, multiphase decomposition and physics-constrained whole-pattern modelling. Gan Jiang converts analytical experience into executable skills by diagnosing failures, revising skill instructions and code, and validating revisions before reuse, without retraining the language model or changing the underlying physical models. Skills selected using development data and frozen before held-out evaluation achieve higher refinement scores than the original expert-designed skills across FullProf, GSAS-II and PyWPEM. The agent resolves strongly overlapping reflections, quantifies a five-phase ancient Egyptian cosmetic, tracks lattice evolution in an operating battery and compares atomic configurations in a disordered oxide catalyst. On DeltaXRDbench, it leads the evaluated methods in single- and multiphase identification across simulated and experimental data. Without supplied composition, single-phase top-1 accuracies reach 96.30\%, 81.78\% and 40.83\% on MP500, RRUFF and opXRD, respectively, compared with 58.00\%, 58.47\% and 26.45\% for the strongest comparator. These results demonstrate how an integrated scientific tool ecosystem can support agents that extract structural knowledge from measurements while accumulating validated analytical expertise that transfers to new samples.

0.37

DSADiff: Data Structure-Aware Diffusion for Crystal Structure Prediction via Mitigating Complexity- and Imbalance-Induced Biases

cs.LG cond-mat.mtrl-sci ·2026-11-17 ·Jiang Xiaobo, Dinghong Lai
benchmark similarity 0.62
Abstract

Crystal Structure Prediction (CSP) is an important step in accelerating the generation and discovery of new materials. In recent years, diffusion-based CSP methods have made significant progress. However, existing models still suffer from generation bias when facing diverse materials spaces, while systematic approaches for tracing the sources of such performance variations remain limited. To address this issue, we propose LAS (Layered Analysis Strategy), a mechanism analysis framework that identifies crystal complexity and elemental composition imbalance as two key factors affecting generation difficulty and further reveals their relationships with model generation performance. Building on these findings, we further propose DSADiff (Data Structure-Aware Diffusion), a data structure-aware diffusion model that transforms the key factors identified by LAS into a unified generation difficulty representation and uses it to jointly drive feature modeling and training strategy optimization. This enables the model to adapt its representation and generation capability to samples with different data structures and difficulty levels, thereby mitigating learning bias across samples. Experiments on three CSP benchmark datasets, including Carbon-24, demonstrate that DSADiff consistently improves both Match Rate and RMSE, with a maximum Match Rate improvement of 9%, surpassing existing state-of-the-art methods and achieving new state-of-the-art performance. This work deepens the understanding of diffusion-based CSP models from the perspective of generation bias and provides a new direction for designing less biased generative models for complex materials spaces.

0.24

A Hybrid Quantum Neural Network to Analyse Big Experimental Powder X-ray Diffraction Data

cs.LG cond-mat.mtrl-sci ·2026-09-17 ·H. Dong, S. D. M. Jacques, M. Q. Hlatshwayo, E. Papoutsellis, K. Georgopoulos +2 more
similarity 0.62
Abstract

Quantitative analysis of experimental powder X-ray diffraction data remains challenging when evaluating complex multiphase materials and noisy measurements. We introduce a hybrid quantum neural network framework designed to extract quantitative parameters, such as phase weight fractions and scale factors, directly from one-dimensional powder diffraction patterns without iterative refinement. The model combines noise-aware classical simulator pre-training with fast downstream fine-tuning on quantum processing unit features, ensuring stability against hardware decoherence. We demonstrate the practical utility of this approach by deploying the trained network onto an IBM quantum computer to analyse experimental X-ray diffraction computed tomography datasets from a three-phase solid oxide fuel cell containing ca. 10,000 patterns and a four-phase lithium-ion battery containing ca. 20,000 patterns). The network successfully reconstructs quantitative spatial phase maps in strong agreement with classical Rietveld refinement, paving the way for using quantum computing hardware to analyse real-world materials characterisation data.

0.37

EPIC: Differentiable Energy-Force Consistent Uncertainty Quantification and Propagation for Machine-Learned Interatomic Potentials

cs.CE ·2026-10-31 ·Tianhao Su, Musen Li, Shunbo Hu, Tong-Yi Zhang
similarity 0.61
Abstract

Machine-learned interatomic potentials (MLIPs) now rival density functional theory in accuracy and are increasingly used to screen vast crystal databases, yet they can produce unreliable predictions for chemistries outside their training distribution without clear warning. Existing force-level evidential approaches do not inherently define a corresponding uncertainty model over the potential energy surface, limiting the consistent propagation of uncertainty to energy-derived observables. Here we introduce Energy-Propagated Intrinsic Confidence (EPIC), a general energy-centered evidential framework that derives forces as exact gradients of the predicted mean energy, ensuring conservative force fields while providing an analytical estimate of energy uncertainty. Coupled to a MACE backbone trained on the Materials Project trajectory dataset, EPIC propagates uncertainty diagnostics to equations of state, anisotropic structural uncertainty ellipsoids, and phonon dispersions through a Monte Carlo procedure. Applied to 10,966 candidate crystals, the fraction classified as robustly dynamically stable increases from 11\% in the highest-uncertainty quartile to 53\% in the lowest-uncertainty quartile. Furthermore, element-resolved analysis reveals a pronounced chemistry dependence in the relationship between epistemic uncertainty and predicted dynamical stability, highlighting potential limitations in the description of complex bonding environments. EPIC thus provides a physics-aware, chemistry-sensitive uncertainty diagnostic for high-throughput screening and autonomous materials discovery.

0.23