CS Paper Radar

Control Invariance on Manifolds through Tangent Bundle Splitting

Luke Georgiou, Ross Drummond, Pablo R. Baldivieso Monasterios

eess.SY ·submitted 2026-11-13 15:51 UTC · v1

Abstract

Control invariance for interconnected non-linear systems on manifolds requires conditions under which subsystem safety constraints can be combined to form an invariant set. This paper develops local product type control invariant sets on manifolds using tangent bundle splitting, adapted product coordinates, and subsystem tangency conditions satisfied simultaneously by one admissible input at each state. The resulting conditions establish control invariance of product sets without requiring independent subsystem dynamics, with separate control choices possible when inputs are independently constrained and each acts only on its subsystem. This provides a way to verify subsystem safety without discarding dynamic coupling and is illustrated by a torus example in which adapted coordinates give a curved constraint region a product representation.

Closest papers

Nearest neighbours by meaning across the whole index.

From Local to Global: Sheaf-Theoretic Control Barrier Functions on Manifolds

eess.SY ·2026-10-28 ·Keith A. Currier, Wilmer Leal, Brandon C. Fallin, James Fairbanks, Warren E. Dixon
similarity 0.65
Abstract · 8 pages, 2 figures

Control barrier functions (CBFs) provide formal safety guarantees for dynamical systems by rendering a safe set forward-invariant via pointwise-optimal feedback control. While the CBF framework is well established for dynamical systems in Euclidean space, there exist gaps for systems evolving on non-Euclidean manifolds. For systems modeled as constrained control differential inclusions, we introduce the Sheaf-CBF: a sheaf-theoretic framework for CBFs on smooth manifolds and vector bundles. The differential inclusions are formulated intrinsically on the control bundle, and analogous regularity properties in the Euclidean case are established fiberwise under local trivializations. Regularity conditions are given under which a pointwise-optimal feedback law is single-valued and continuous over local charts. Framed as a local-to-global optimization problem, sheaf-theoretic restriction and gluing compatibility conditions on overlapping charts are shown to uniquely determine a continuous global section of the control bundle, thereby guaranteeing forward invariance of the safe set. Numerical simulations on a nontrivial M{ö}bius strip demonstrate that failure of sheaf compatibility results in violations of safety, whereas the Sheaf-CBF maintains forward invariance.

0.56

Lifting Safety Through Reduced-Order Model Architectures: An Invariant Manifold Approach

eess.SY math.OC ·2026-10-16 ·Massimiliano de Sa, Aaron D. Ames
similarity 0.59
Abstract · 8 pages, 2 figures, Submitted to the American Control Conference (ACC) 2027

Reduced-order model architectures are often used to decompose complex safety-critical control design tasks into tractable subproblems. In this paradigm, one must ask: when does the safety of a reduced-order model lift to safety of the full system? Taking an invariant manifold perspective, we provide necessary and sufficient conditions for the existence of smooth, regular lifts of compact safe sets from reduced-order models. Our characterization relies only on asymptotic stability of an embedding of a reduced-order safe set, without additional robustness or rate conditions. We apply these results to study control barrier functions in reduced-order model architectures and lifts of safe sets through cascades. Further, we use our conditions to obtain topological obstructions to the tracking of safe, kinematic reduced-order models for mechanical systems. We conclude by using these obstructions to inform safe hierarchical control design for an underactuated satellite on SE(3).

0.49

Geometric Hybrid Dynamical Systems: Part I - Modeling and Stability

eess.SY math.DSmath.DG ·2026-09-15 ·Piyush P. Jirwankar, Daniel E. Ochoa, Ricardo G. Sanfelice
theoryunusual similarity 0.56
Abstract · 28 pages, 4 figures. Under review at IEEE Transactions on Automatic Control

We present a framework for the modeling and analysis of geometric hybrid dynamical systems as hybrid inclusions on $C^1$-manifolds. Using tools from nonsmooth and set-valued analysis on manifolds, we derive coordinate-independent sufficient conditions for the existence of nontrivial solutions to this type of systems. We present geometric notions of uniform stability and attractivity of compact sets, and establish their equivalence to metric-based stability notions when the manifold is endowed with a Riemannian structure. We also introduce nonsmooth Lyapunov functions and a hybrid Lyapunov theorem providing sufficient conditions for uniform global asymptotic stability of compact sets. Finally, by characterizing $ω$-limit sets of precompact solutions, we derive a hybrid invariance principle for geometric hybrid dynamical systems. The results are demonstrated through several running examples.

0.28

Invariance is Compositional for Continuous-time Systems: From Sleekness to Lebesgue Density

eess.SY ·2026-09-29 ·Othman Cherkaoui Dekkaki, Sadek Belamfedel Alaoui, Olayo Reynaud, Mohamed Maghenem, Alessio Iovine +1 more
unusual similarity 0.55
Abstract

This work establishes the first bidirectional compositional invariance result: robust forward invariance of a global Cartesian product set is shown to be equivalent to robust forward invariance of each local subsystem under coupling inputs from its neighbors. To facilitate this, we introduce the notion of tangential Lebesgue-density, a new condition that is weaker than classical sleekness but sufficient to ensure that the product of individual tangent cones equals the tangent cone of the product set. This equivalence reduces the curse of dimensionality by allowing the verification of a high-dimensional global system to be decomposed into a series of local sub-checks. The framework's scalability is demonstrated through a DC microgrid numerical example, confirming that the verification complexity grows only linearly with the number of subsystems.

0.26

Intrinsic Path Following on $\mathsf{SO}(3)$

eess.SY math.OC ·2026-10-03 ·Adeel Akhtar
similarity 0.54
Abstract · 8 pages, 2 figures

This paper studies intrinsic path following for fully actuated rigid-body attitude dynamics over a broad class of attitude paths, namely arbitrary smooth embedded closed curves on $\mathsf{SO}(3)$. We construct a tangential--transverse state decomposition on a tubular neighborhood using normal and pullback bundle geometry. The resulting second-order dynamics admit a smooth feedback transformation that independently assigns tangential and transverse covariant accelerations. A transverse proportional--derivative law renders the path-following manifold invariant and locally uniformly exponentially stable on an explicit forward-invariant neighborhood, while leaving the tangential dynamics freely assignable. This allows independent regulation of progression along the path, stabilization of a selected attitude on the path, or tracking of a time-varying motion. For a representative fiber path, the tubular coordinates are obtained in closed form up to the natural cut-locus obstruction, and simulations illustrate point stabilization and trajectory tracking.

0.22

Safe Control of Semi-Explicit Differential-Algebraic Systems: Control Barrier Functions with SOS Verification

eess.SY math.OC ·2026-10-07 ·Mohamad H. Kazma, Hongchao Zhang, Abdallah A. Albustami, Ben Wooding, Meiyi Ma +2 more
similarity 0.51
Abstract

Differential-algebraic equation (DAE) systems arise in power networks, multibody mechanics, and chemical processes, where algebraic constraints couple dynamic and algebraic states. Standard control barrier function (CBF) methods, designed for ordinary differential equations, fail for DAE systems because the algebraic constraints impose compatibility requirements that may render safety filters infeasible. This paper develops a safety-critical control framework for semi-explicit DAE systems using CBFs that consider compatibility with the algebraic constraints, termed DAE-aware CBFs. We construct projected vector fields on the constraint manifold to account for the hidden dynamics, while ensuring compatibility conditions that keep the algebraic constraints satisfied. We then present sum of squares (SOS) verification conditions that certify both correctness and feasibility of the resulting DAE-aware CBF. The framework is validated on power system case studies.

0.45

On necessary conditions for feedback stabilizability when the control space is a fiber bundle

eess.SY math.OC ·2026-11-09 ·Wouter Jongeneel, Martina Scolamiero, Karl Henrik Johansson
similarity 0.49
Abstract · 18 pages, 1 figure. Submitted

Within control theory, a question of great interest is to understand when a stabilizing feedback exists. Building upon Krasnosel'skiĭ and co-workers, necessary conditions for the existence of a continuous stabilizing feedback have been pioneered by Brockett and Coron, providing so-called adversarial and homological conditions, respectively. Kvalheim recently generalized their conditions from equilibria to compact attractors and---in line with earlier work by Coron---showed that when a control system can be identified with a vector bundle, the homology condition is stronger, that is, the homology condition implies the adversary condition. Kvalheim also showed that this comparison breaks when extending the case of vector bundles to fiber bundles. In this work, we propose and characterize an appropriate adversarial condition for control systems represented by fiber bundles. The homology condition, on the other hand, is already well-defined, showcasing its general applicability. With the generalized conditions at hand, we show that by appropriately relaxing the regularity of the feedback under consideration, that is, by allowing for mild discontinuities, the homology condition implies the adversarial condition for fiber bundles. Thereby, in this work, we extend these earlier comparative results.

0.24

Geometric Fixed-Time Sliding Mode Control for Constrained Attitude Tracking on $\mathrm{SO}(3)$

eess.SY ·2026-09-01 ·Saumitra Barman, Shashi Ranjan Kumar, Rohit Gupta
similarity 0.48
Abstract

This paper studies constrained spacecraft attitude tracking on the Riemannian configuration manifold $\mathrm{SO}(3)$ in the presence of multiple attitude pointing constraints and matched external disturbances. To address this, an attitude potential function is proposed intrinsically on $\mathrm{SO}(3)$, and its key properties are established using intrinsic geometric analysis. Under mild conditions, the potential function is shown to admit a unique nondegenerate minimum at the desired attitude over the admissible subset of $\mathrm{SO}(3)$, defined by excluding the forbidden attitude regions as well as a measure-zero set, thereby ensuring a well-posed constrained attitude tracking problem. A Riemannian Hessian analysis shows that the Hessian of the potential function is locally uniform positive definite in an open neighborhood of the desired attitude, thereby establishing local strong convexity. A nonsingular fixed-time geometric sliding manifold is proposed using the Riemannian gradient of the potential function, leading to a geometric fixed-time sliding-mode-based constrained attitude control law. It is shown that, for every initial attitude in the admissible subset, the closed-loop state trajectory evolves on $\mathrm{SO}(3)\times\mathbb{R}^3$, with the attitude remaining in the admissible subset throughout the maneuver, while the state converges to a sufficiently small compact neighborhood of the desired equilibrium in a prescribed fixed time. Numerical simulations validate the proposed control approach and illustrate the theoretical results.

0.24