CS Paper Radar

Heavy Metal Acrobatics: Learning Dynamic Control for Skid-Steer Loaders

Pierre-Jean Lorentz, Pascal Egli, Edo Jelavic, Cliff Li, Ramitha Sundar, Harikrishnan Suresh, Paul Montgomery, Lee Redden, Matthias Müller, Ozan Sener, Vladlen Koltun, Marco Hutter

cs.RO ·submitted 2026-11-13 16:13 UTC · v1
top venue

Abstract

Automation of heavy machinery offers the opportunity to improve productivity in mechanized industries such as construction, mining, and material handling. Yet, automation of such machines is challenged by their complex dynamics, in part because of hydraulic actuation that involves fluids, flexible elements, and nonlinear delays. A concomitant challenge is the size and weight of these machines, which can make experiments on the physical systems exceedingly dangerous. Here, we show that \ac{RL} in simulation, followed by transfer of the learned policies from simulation to reality, can successfully automate acrobatic maneuvers that push a heavy construction machine to the limits of its actuation and have only previously been accomplished by a small number of elite human operators in official world-record performances. We trained policies that perform autonomous acrobatic maneuvers on a John Deere 332G, an operational 5-tonne skid-steer loader. The policies can autonomously swing the machine up onto two wheels and, while balancing on two wheels, drive over rough terrain, trace out specified trajectories, spin around, and swing the bucket back and forth before landing it safely back onto four wheels. This work demonstrates that \ac{RL} and sim-to-real transfer enable dynamic autonomous control of heavy machinery, directly contributing to greater automation in heavy equipment sectors. Videos: https://sites.google.com/leggedrobotics.com/heavy-metal-acrobatics This is the author's version of the work. It is posted here by permission of the AAAS for personal use, not for redistribution. The definitive version was published in Science Robotics on 11 November 2026, DOI: https://doi.org/10.1126/scirobotics.aef0894

Journal ref
P.-J. Lorentz, P. Egli, E. Jelavic, C. Li, R. Sundar, H. Suresh, P. Montgomery, L. Redden, M. Müller, O. Sener, V. Koltun, M. Hutter, Heavy metal acrobatics: Learning dynamic control for skid-steer loaders. Sci. Robot. 11, eaef0894 (2026)
DOI
10.1126/scirobotics.aef0894

Closest papers

Nearest neighbours by meaning across the whole index.

Precision at Speed: Sample-Efficient Online Model-Based Reinforcement Learning for Hydraulic Excavator Control

cs.RO cs.LGeess.SY ·2026-09-25 ·Claudio Canales, Fang Nan, Marco Hutter, Javier Ruiz-del-Solar
similarity 0.64
Abstract

Precise, high-speed control remains challenging for robots with complex actuation dynamics. Learning directly on hardware is further constrained by the cost of real-world interaction. We present an online model-based reinforcement learning framework that learns a probabilistic dynamics ensemble model from scratch for sampling-based model predictive control. A precision-gated contouring objective conditions the progress reward on path accuracy, prioritizing precision over speed. In a data-driven excavator simulator, the framework achieves higher sample efficiency than the evaluated model-based reinforcement learning baselines. We validate the framework by learning directly on an 11.5-ton Menzi Muck M445 hydraulic excavator, without demonstrations or simulation pretraining. After 20 minutes of interaction, the controller reaches tracking accuracy comparable to prior learned controllers trained on 100-150 minutes of data. After 40 minutes, it sustains sub-centimeter mean path error at high operating speeds.

0.21

Size Doesn't Matter: Material-State Reinforcement Learning for Excavator Transferable Soil Manipulation

cs.RO ·2026-09-11 ·Lennart Werner, Pol Eyschen, Sean Costello, Pierluigi Micarelli, Andrei Cramariuc +1 more
similarity 0.63
Abstract · 22 pages, 31 figures, journal paper

Earthmoving tasks such as excavation, backfilling, or embankment construction require deliberate repositioning of deformable soil. For these tasks, human operators use all shovel faces, while autonomous systems so far are limited to excavation and dumping. Current methods often rely on heuristic models but do not incorporate soil mechanics. We address this shortcoming by using Reinforcement Learning in a GPU-parallelized Material Point Method particle simulation. Our controllers are conditioned on material state such as shape and compactness, enabling skills that use multiple contact faces of the tool and displace material both inside and outside of the shovel. To use the same learned weights across machines, our policies operate in a normalized end-effector space and are deployed through a calibrated machine interface. We evaluate this calibrated transfer on an 11.5t hydraulic excavator and a 500g tabletop robot. We validate performance through autonomous construction of a 42m long, 2.1m high embankment in 45min, executing 201 individual policy strokes without failure, retry, or operator intervention. In a direct comparison, the autonomous controller matches an expert operator's progression speed and produces a higher, more consistent embankment. Additional qualitative backfilling and compaction experiments demonstrate the material-state awareness and calibrated transfer across machines.

0.34

DAPPT: Domain-Aware Policies from Procedural Trajectories for Sim-to-Real Dexterous Tool Use

cs.RO ·2026-11-15 ·Beining Han, Jia Deng
similarity 0.62
Abstract

Sim-to-real RL has achieved impressive results in dexterous manipulation but remains limited to tasks with accurate rigid-body simulation. However, these methods cannot be applied to skills that involve deformable and particles, with which the simulation speed will become too slow for large-scale RL learning. We present DAPPT, a sim-to-real framework for end-to-end dexterous tool-use manipulation skills, e.g., sand scooping, play-dough rod-rolling, without simulating non-rigid materials. Our method learns a domain-aware RL policy by tracking procedural trajectories parameterized by domain parameters, and distills it into an end-to-end domain-aware sensorimotor policy. Furthermore, explicit domain represen-tation enables fast selection of domain parameters that can maximize downstream task performance. We evaluate DAPPT end-to-end on six dexterous manipulation tasks, including sand scooping, play-dough rod-rolling, sand scraping, mouse-wheel scrolling, dispenser pressing, and spray triggering. Our method achieves 1.5-3.8x in task metrics through the best domain parameter and transfers zero-shot to the real world.

0.07

Weight-space programming for tractor guidance controller: large language models natively write neural network weights that steer a real tractor

cs.LG cs.AIcs.ROeess.SY ·2026-11-16 ·Timo Oksanen
hot direction similarity 0.61
Abstract · 20 pages, 8 figures, 8 tables (1 in the appendices); includes a field test on a real tractor

Weight-space programming is a process where a large language model reads and writes the weights of a neural network directly, guided by a natural language specification, without an optimiser or gradient descent. This study applies it to automatic tractor guidance, where a 253-parameter neural network steers along paths of lines and arcs and must be adapted when the machine changes, such as a slower steering actuator. GPT-6 Astra and Claude Fable 5.1 (also 5.2) edited the network for our research tractor using a small budget of simulated evaluations to repair a network trained for another tractor and write a controller into a network with zero weights. We compared them with an evolution strategy, gradient descent and pure pursuit in simulation and on the real tractor. Both models read the network and analysed the closed loop with control theory correctly, and Fable's repair without simulation succeeded only occasionally. With simulated feedback, both models repaired the trained network in single sessions and wrote a working controller from zero weights, whereas from zero the evolution strategy found none. The controllers written from zero were sparse and in a classical cascaded structure; one model edited the trained network while the other replaced it. Gradient descent reached higher accuracy with far more simulation, and all language model controllers steered the real tractor without intervention, with errors of the same order as pure pursuit. Language models can program the weights of a neural controller directly, much as control engineers design one. We call this Weight-Space Engineering.

0.42

Wheel-loader V-Cycle Automation with Deep Koopman MPC

cs.RO eess.SY ·2026-09-22 ·Armin Abdolmohammadi, Navid Mojahed, Dinesh Kumar, Bahram Ravani, Shima Nazari
similarity 0.60
Abstract · 8 pages, 4 figure

The repeated forward-reverse maneuvers performed by wheel loaders during earthmoving operations make them well suited for automation. However, the nonlinear dynamics of articulated vehicles and complex vehicle-terrain interactions limit the effectiveness of conventional model-based approaches. This paper presents a hierarchical framework that combines long-horizon geometric planning with data-driven predictive control for autonomous wheel-loader operation. A reduced-order articulated kinematic model is used to generate the maneuver geometry, where the forward and reverse trajectories are jointly optimized through a shared intermediate state. To capture the vehicle dynamics, two data-driven deep bilinear Koopman models are learned for the forward and reverse motions using data generated from high-fidelity simulations in Algoryx Dynamics. The learned Koopman representations are subsequently incorporated into a computationally efficient model predictive control (MPC) formulation for trajectory tracking. The resulting controller operates in real time within a 50-ms execution loop. High-fidelity simulation results demonstrate that the proposed end-to-end framework enables accurate and computationally efficient execution of wheel-loader V-cycle maneuvers, providing a promising approach toward autonomous operation of articulated heavy-duty machinery.

0.26

IL-ACT: Imitation Learning with Adaptive Cartesian Tracking Control for a 30-ton Excavator

cs.RO ·2026-09-15 ·Mehdi Heydari Shahna, Seihun Kim, Soyi Jung, Soohyun Park, Jouni Mattila +1 more
similarity 0.60
Abstract

Autonomous excavator control is challenged by coupled kinematics, actuation lag, and uncertainty. We propose imitation learning and adaptive Cartesian tracking (IL-ACT), a novel motion control framework for a 30-ton-class excavator. An anchored, 14-input imitation policy pretrained on operator demonstrations generates nominal joint rates; adaptive Cartesian feedback and gated gain/bias estimation correct these commands before a stopping-distance governor constrains joint-reference generation. Simscape evaluation covers 100 sequential goals and spiral, figure-eight, and rounded-raster tracking, including 88 additional runs across three training seeds, two initializations, and speeds, under hydraulic response and sensing conditions. Compared with Teacher+ACT, IL-ACT completes all goals with shorter duration and lower terminal errors under both response conditions. Telemetry-initialized IL-ACT lowers RMSE in all 24 figure-eight and rounded-raster seed comparisons and lowers additional-load spiral mean RMSE by approximately 29%. Original spiral RMSE also improves over IL-only and PID. Under a shared sensor-noise realization, telemetry-initialized IL-ACT achieves 27.67% lower mean RMSE than Teacher+ACT; enabling estimation reduces mean RMSE by $22.44\%$ relative to the frozen estimator. Pretrained-weight effects remain mixed, and the original teacher comparison exhibits a spiral RMSE--maximum-error tradeoff. Analysis establishes bounded adaptive states and Cartesian feedback, with reference admissibility conditional on governor feasibility.

0.54

SMaRT-Tug: Structured Multi-Agent Reinforcement Learning for Physics-Based Tugboat-Barge Collaborative Manipulation

cs.RO ·2026-09-07 ·Junkai Lu, Jiadong Zhao, Jiacheng Zhang, Wenqi Zhao, Hao Gen Chia +6 more
similarity 0.60
Abstract · Submitted to DAI

Autonomous tugboating is central for automating maritime operations such as port logistics and vessel maneuvering, where multiple tugboats must cooperatively transport/manipulate a larger vessel. Collaborative pushing in this setting is challenging due to coupled hydrodynamics, low resistance, strong environmental disturbances, underactuated barge dynamics, and contact-rich interactions. Conventional control methods often rely on simplified models and fixed configurations, which limit their adaptability, while learning-based approaches are constrained by the lack of scalable and physically realistic training environments. We address these challenges by introducing a physics-based, GPU-accelerated simulation and learning framework for collaborative tugboat manipulation. Our simulator incorporates a customized buoyancy model, wave modeling, and hydrodynamic resistance, and supports large-scale multi-agent training under marine dynamics. In this simulator, we train a decentralized MAPPO (Multi-Agent PPO) policy augmented with a structured control prior (SCP) to improve training stability and maintain feasible pushing configurations. We evaluate our learned policy on straight-line transit, turning, and deceleration tasks, where we show that our decentralized framework yields more reliable and accurate maneuvering performance compared to a PID-based controller and a centralized PPO baseline. We further demonstrate zero-shot generalization to more challenging sea states and advanced maneuvers, as well as zero-shot scalability to larger teams of three and four tugboats despite training with only two agents.

0.14

From Target Selection to Digging: A Learning-Based Framework for Continuous Autonomous Excavation

cs.RO ·2026-09-24 ·Shuai Zhao, Ji-an Pan, Quantao Yang, Zheng Wang, Chaoyi Chen +2 more
similarity 0.59
Abstract · 8 pages, 7 figures, 4 tables. Updated author affiliations; technical content unchanged

Repeated excavation continuously reshapes pile geometry, requiring an autonomous excavator to adapt its digging targets and coordinate motion across successive excavation cycles. We present a learning-based framework for continuous autonomous excavation that integrates terrain-aware target selection with reinforcement- and imitation-learning controllers. The framework separates target-conditioned motion from local digging: a shared task-conditioned RL policy controls waypoint-guided approach and loaded transport, while an IL policy learns vision-based digging and lifting from expert demonstrations. Digging targets are selected from LiDAR elevation maps and converted into bucket-tip waypoints for motion control. The control architecture coordinates the learned policies and deterministic unloading through a shared motion interface. The complete system is deployed on a scaled hydraulic excavator with multimodal sensing and closed-loop actuator control. Offline replay and physical experiments demonstrate more consistent target selection, shorter local motion time, and increased payload compared with the respective baselines. The learned digging policy achieves a mean payload of 6.52 kg per completed cycle, compared with 2.68 kg for Fixed Dig. Three five-scoop runs further demonstrate consecutive autonomous excavation under continuously changing pile geometry.

0.22