CS Paper Radar

CS-MPC: Contraction-Certified Sampling-Based MPC for Nonlinear Systems Under Uncertainty

Yashwanth Kumar Nakka

eess.SY cs.RO ·submitted 2026-11-13 16:33 UTC · v1
theoryhot direction

Abstract

We present contraction-certified sampling-based model predictive control (CS-MPC) for tracking and safety of nonlinear robotic systems under parametric uncertainty, disturbances, and safety constraints that are revealed online. CS-MPC uses a contraction-certified tracking feedback inside every sampled rollout, which concentrates the rollouts around the reference, and an execution layer that verifies the applied input using a quantile-tightened discrete-time control barrier function condition. We derive a verification procedure for nonlinear contraction of the feedback-closed dynamics, and we prove a finite-sample stochastic stability bound and a mission-level probabilistic safety guarantee. We validate CS-MPC in simulation on a rover, a quadrotor, and an asteroid landing. When compared with standard model predictive path integral (MPPI) control, CS-MPC attains the same tracking error with 7 to 20 times fewer rollouts for the rover, and a 2 to 4 times lower tracking error for the quadrotor, with no safety violations in 200 Monte Carlo missions.

Closest papers

Nearest neighbours by meaning across the whole index.

Safety-aware Model Predictive Path Integral Control with Signal Temporal Logic

cs.RO eess.SY ·2026-08-25 ·Yiqi Zhao, Taekyung Kim, Hideki Okamoto, Bardh Hoxha, Jyotirmoy V. Deshmukh +2 more
similarity 0.74
Abstract

Safety-aware motion planning remains a challenge in robotics, especially when missions are time-critical and are under complex specifications. In this paper, we propose safety-aware-stl-mppi, a computationally efficient sampling-based receding-horizon planning framework designed to promote satisfaction of constraints expressed in Signal Temporal Logic (STL). Our approach encodes discrete-time STL formulas into candidate time-varying control barrier functions (CBF), which are integrated into a model predictive path integral (MPPI) controller. Our method inherits the benefits of low computational cost from an efficiently parallelizable sampling based planner and utilizes CBF for constraints expressed in STL. We compare against several MPPI baselines using four artificial Mars Rover planning case studies with a diverse environment and cost setups, where we show our method consistently achieving high safety and efficiency. We show a quadcopter planning experiment with NVIDIA Isaac Lab.

0.16

Reachability-Guided Sequential Quadratic Programming-Guarded Model Predictive Path Integral for Safe Nonlinear Predictive Control

cs.RO eess.SY ·2026-10-03 ·Alexandre Didier, Jason J. Choi, Namhoon Cho, Claire J. Tomlin, Melanie N. Zeilinger
similarity 0.74
Abstract

Safe robot control often requires combining long-horizon performance optimization with hard state and input constraints, but existing approaches tend to address this tradeoff partially. Sampling-based model predictive control (MPC) methods such as model predictive path integral (MPPI) are effective in handling nonlinear and nonconvex environments, yet their finite-sample rollouts and unconstrained weighted-average update can return an unsafe control. Deterministic nonlinear MPC can explicitly incorporate constraints, but its real-time safety and performance depends strongly on warm starts and local convergence. Hamilton--Jacobi reachability (HJR) provides rigorous safety certificates, but offline value-function computation remains practical only for reduced-order models. We propose ReSQ-MPPI, a reachability-informed generation--refinement architecture that combines these complementary strengths. An HJR value function computed offline for a reduced-order model guides online MPPI sampling toward safe, promising trajectory candidates. The MPPI solution is then refined by a small number of sequential quadratic programming (SQP) iterations in a full-order MPC problem. A key observation is that the standard MPPI inference step is an unconstrained weighted least-squares problem; ReSQ-MPPI replaces it with a constrained MPC refinement that recovers the MPPI update when it is feasible and minimally modifies it otherwise. Simulations in cluttered navigation and autonomous racing environments demonstrate that ReSQ-MPPI improves safety and performance over standalone MPPI, MPC, and reachability-filtered sampling-based control baselines.

0.18

Laguerre-MPPI

eess.SY ·2026-11-18 ·Yusuke Tahori, Masaki Inoue, Hayate Irie, Tomohiro Taki, Takashi Hatano
theoryhot direction similarity 0.69
Abstract

Model Predictive Path Integral control (MPPI) is a sampling-based control method that handles nonlinear dynamics and non-convex costs without gradient information. Since MPPI samples the entire input sequence, longer prediction horizons lead to a higher-dimensional sampling space, potentially degrading control performance. This paper proposes Laguerre-MPPI, which parameterizes the control input sequence using discrete-time Laguerre basis functions and samples the basis coefficients. The resulting search dimension is independent of the prediction horizon. Hence, a longer prediction horizon does not require more samples to maintain the sampling density. For linear systems with quadratic costs, we derive a closed-loop stability condition in the infinite-sample limit. Under finite sampling, we provide a closed-form expression for the limit of the ratio of the effective sample size to the number of samples. We also show that the upper bound of this limit for Laguerre-MPPI is no lower than that for conventional MPPI. Numerical experiments demonstrate smoother inputs in obstacle avoidance and maintained performance over long horizons. Moreover, they verify the lower bound on the number of samples given by the finite-sample analysis.

0.28

CLIS-MPPI: Closed-Loop Model Predictive Path Integral Control With Initial-State Sampling Under Execution Delay

cs.RO ·2026-10-15 ·Zidong Liu, Xu Chen
similarity 0.68
Abstract · 65th IEEE Conference on Decision and Control (CDC 2026)

Sampling-based motion planning such as Model Predictive Path Integral (MPPI) control has become attractive for robotics due to its ability to handle nonlinear dynamics and non-smooth objectives without gradient information, while leveraging parallel rollout computation for real-time performance. However, in real-world robotic systems, the optimized control input is often applied after a non-negligible planning delay, causing a mismatch between the state used in forward simulation and the actual state at control execution, which can significantly degrade planning accuracy and may even lead to unsafe behavior such as collisions. This paper proposes Closed-Loop MPPI with Initial-State Sampling (CLIS-MPPI), which explicitly addresses execution-time state mismatch by modeling planning delay as a distribution over plausible execution-time initial states, performing rollout optimization from sampled initial states, and applying a rollout-based local feedback correction during control execution. The proposed method is validated through real-world experiments on a 6-DoF UR5e manipulator in a narrow-passage task involving obstacle avoidance and end-effector target reaching. Across 5 real-world runs of the same task, standard MPPI collided in 2 runs, whereas CLIS-MPPI remained collision-free in all 5 runs. Averaged over all collision-free runs for each method (3 for MPPI and 5 for CLIS-MPPI), CLIS-MPPI reduced the average task completion time from 25.4s to 24.4s and the average end-effector path length from 0.456 m to 0.425 m. It also reduced the overall joint-position and joint-velocity root mean square errors (RMSEs) from 0.100 rad and 0.108 rad/s to 0.017 rad and 0.011 rad/s, respectively. These results demonstrate improved safety, planning-execution consistency, and motion smoothness.

0.11

Sample-Efficient Model Predictive Control via Proximal Policy Optimization

eess.SY ·2026-11-17 ·Jiarui Wang, Sina Sharifi, Mahyar Fazlyab
similarity 0.68
Abstract

Sampling-based model predictive control (MPC) enables real-time control of complex nonlinear systems but often incurs substantial computational costs due to repeated trajectory simulations. In this paper, we bridge policy optimization in reinforcement learning and sampling-based MPC to improve computational efficiency through sample reuse. Starting from a KL-regularized distributional formulation of trajectory optimization, we derive an exact performance-difference identity based on a signed exponential advantage function. This identity motivates two algorithms, PPO-MPPI and SPO-MPPI, which adapt proximal policy optimization techniques to sampling-based MPC, enabling multiple optimization updates using previously evaluated trajectories without additional forward simulations. We establish population-level monotonic improvement guarantees for both methods and prove convergence to first-order stationarity for PPO-MPPI under fixed-covariance Gaussian sampling distributions. Experiments on quadruped velocity tracking and quadrotor path tracking demonstrate that the proposed methods achieve competitive control performance at substantially lower computational cost than multi-stage sampling approaches. Our results establish a principled connection between policy optimization and sampling-based MPC and highlight the potential of trajectory reuse for sample-efficient predictive control.

0.23

Hybrid Feedback Sampling for Sample-Efficient Model Predictive Control

cs.RO eess.SY ·2026-08-19 ·Chaoyi Pan, Zeji Yi, John Zhang, Zachary Manchester, Guannan Qu +1 more
similarity 0.67
Abstract · 15 pages, 6 figures

Thanks to its parallelizability and flexibility, sampling-based Model Predictive Control (MPC) has become widely popular for controlling real-world robotic systems. However, for high-dimensional and open-loop unstable dynamical systems, the required number of samples to improve the control sequence will grow exponentially with the horizon, leading to poor sample efficiency and numerical instability. This paper investigates the instability of shooting methods in sampling-based MPC and shows that the optimal sampling proposal distribution can be realized by sampling with an optimized feedback policy. We refer to this algorithm as Feedback Sampling MPC (FS-MPC). FS-MPC involves a hybrid sampling design which balances local and global search based on the system stability and the available computation budget. Our theoretical analysis shows that our hybrid sampling approach achieves faster convergence than standard MPPI and better optimality than standard feedback sampling. Empirically, in diverse contact-rich control tasks like humanoid loco-manipulation and dexterous manipulation, we show that FS-MPC successfully tackles dynamically unstable tasks where standard sample-based approaches struggle, and strictly outperforms feedback policies alone. Finally, we validate our method on humanoid robot locomotion and manipulation tasks in the real world.

0.49

Online, Reachability-Aware, Sampling-Based Motion Planning

cs.RO eess.SY ·2026-09-08 ·Brendan Gould, Zhiyuan Zhang, Panagiotis Tsiotras, Samuel Coogan
similarity 0.67
Abstract · 8 pages, 1 figure

Sampling-Based Model-Predictive Control (MPC) algorithms are a flexible class of controllers used for navigation on a wide range of robotic systems. Historically, such approaches have lacked hard safety guarantees, a shortcoming which we remedy in this work by computing guaranteed reachable-set overapproximations online with a fast, interval-based pipeline. We show that our method achieves similar performance to a state-of-the-art reachability-based planner without the need for the expensive pre-computation step, and can be scaled to systems that are infeasible using existing approaches. Finally, we demonstrate that our technique reduces safety violations by over 99% in a racing simulation and successfully controls a model racecar on real hardware experiments without crashes.

0.19

Exact-Safe MPPI: Safety-Aware Sampling with Nonsmooth Control Barrier Functions

eess.SY ·2026-10-05 ·Alexander Coker, Leilei Cui
code/data similarity 0.67
Abstract · 8 pages, 5 figures, 1 table. Submitted to the 2027 American Control Conference (ACC)

Model predictive path integral (MPPI) control plans actions by sampling and evaluating trajectories, but standard MPPI does not guarantee safety. Incorporating control barrier function (CBF) filters into each rollout allows the planner to account for safety corrections. However, combining multiple CBFs through a soft-minimum approximation can exclude states that satisfy the original safety constraints, restricting the trajectories available to the planner. This paper proposes Exact-Safe MPPI, which uses the exact minimum of multiple barrier functions and applies a CBF-based quadratic program during both planning and control execution. To handle nondifferentiability where multiple barriers attain the minimum, the filter simultaneously enforces the CBF conditions for all $δ$-active barriers, whose values lie within a prescribed tolerance $δ>0$ of the minimum. Under suitable feasibility and regularity assumptions, we establish forward invariance of the certified safe set without the shrinkage introduced by soft-minimum smoothing. We also characterize the state-dependent approximation gap and explain how multiple barriers with values at or near the minimum increase this shrinkage. Furthermore, we show that increasing the number of MPPI samples cannot recover trajectories excluded by the soft-minimum filter. We demonstrate the effectiveness of the proposed approach in a navigation task requiring passage through a narrow gap between two obstacles. Video demonstrations are available at https://github.com/lc-lab25/Exact-Safe-MPPI .

0.41