CS Paper Radar

Sample-efficient prediction of high-entropy alloy strength through outcome-aware robust sequential learning

Ahmed Shoyeb Raihan, Md Habibor Rahman, Ashish Nimbarte, Imtiaz Ahmed

cs.LG ·submitted 2026-11-13 17:29 UTC · v1

Abstract

Accurate prediction of high-entropy alloy (HEA) strength can guide composition and processing decisions; however, obtaining tensile-test data for HEAs can be costly and experimentally demanding. This study proposes Robust Outcome-aware Sequential Experimentation for High-Entropy Alloys (ROSE-HEA), a sample-efficient framework for predicting ultimate tensile strength (UTS) from alloy composition and processing conditions. Its acquisition policy anticipates how possible UTS outcomes update predictions and the support for complementary Gaussian process (GP) descriptions. It then reassesses the worst-case expected predictive risk remaining across a reference domain to select informative candidates. A retrospective evaluation on 501 HEA records compares ROSE-HEA with expected-improvement (EI) and upper-confidence-bound (UCB) Bayesian optimization (BO), random GP sampling, and eight conventional regressors across 30 matched runs with shared initial observations and test conditions. Starting from 25 initial observations and acquiring 100 additional responses, ROSE-HEA achieves the lowest mean root-mean-square error (RMSE), at 152.84 MPa, and the highest mean R^2, at 0.7443. Mean RMSE is reduced by 6.16% and 6.37% relative to EI and UCB, respectively. The selected observations improve prediction across six regressor families and provide broader design-space coverage. ROSE-HEA also surpasses the strongest conventional regressor's mean predictive performance using 125 rather than 185 observations, corresponding to 32.4% fewer training observations. These findings demonstrate the potential of outcome-aware robust sequential learning to improve UTS prediction in HEAs under constrained training budgets.

Closest papers

Nearest neighbours by meaning across the whole index.

Quantifying out-of-distribution data severity with Wasserstein distances: benchmarking large language models for alloy property prediction

cs.LG cond-mat.mtrl-sci ·2026-11-02 ·YuJie Liu, Dezhen Xue, Jun Sun, Xiangdong Ding, Zhibin Gao +1 more
similarity 0.67
Abstract · 23 pages, 10 figures

As general-purpose Large Language Models (LLMs), such as Gemini and DeepSeek, exhibit increasingly advanced reasoning capabilities, a critical question arises: how do their property prediction abilities compare to those of domain-specific pretrained materials models? In this study, we evaluate predictions for Ti, steels, high-entropy alloy (HEA) and Al, demonstrating that general-purpose LLMs surprisingly outperform SteelBERT, MatSciBERT, and SciBERT. To further enhance performance, we introduce a hybrid approach that utilizes numerical priors from a prior model, such as CatBoost or SteelBERT, to guide the general LLMs (Deepseek V3.1, Gemini-2.5-Flash). By inputting these initial estimates from a prior model as prompts, the LLM acts as a reasoning corrector, achieving accuracy superior to the prior model and "unguided mode". Furthermore, we investigate the impact of data strategy using a similarity-based metric, revealing that data quality dominates quantity; using merely 5% of high-similarity reference data of training set as input yields performance similar to the results of using 100% of training set. Additionally, the LLMs demonstrate excellent uncertainty calibration, where self-reported "high" confidence strongly correlates with minimal deviation from ground truth. Our findings suggest that synergizing general-purpose LLMs with prior model numerical baselines and high-quality data curation creates a cost-effective and accurate paradigm for materials discovery, reducing the need for expensive domain-specific pretraining.

0.22

Agentic Resource Allocation for Batch Multi-Objective Bayesian Optimization in Autonomous Materials Discovery

cs.AI cond-mat.mtrl-scics.LG ·2026-10-02 ·Robert Robinson, Shakti Prasad Padhy, Sushant Sinha, Sk Md Ahnaf Akif Alvi, Juan Florez Coronel +4 more
similarity 0.62
Abstract · 36 pages, 8 Main Text Figures, 2 Main Text Tables, 3 Appendix Sections

The discovery and development of advanced materials is a challenging process constrained by the high time and monetary costs of synthesis, processing, and characterization. The underlying design spaces can be enormous, often with multiple competing objectives. Bayesian optimization (BO) provides a principled approach for efficiently navigating such spaces, but most workflows rely on fixed exploration-exploitation policies that lack the capacity to adapt to shifting constraints in dynamic campaigns typical of self-driving laboratories. In this work, we develop a multi-objective BO framework for alloy design under resource constraints, benchmarking strategies for adaptive policy tuning at each iteration. Our evaluation covers a septenary refractory high-entropy alloy (RHEA) system focused on maximizing melting temperature and minimizing density, and an Fe-Co-Ni-based soft magnetic alloy system targeting saturation magnetization, coercivity, and hardness. We compare an exploitation-focused strategy, a fixed mixed exploratory/exploitative policy, and two distinct LLM-based adaptive strategies with different approaches to batch allocation and campaign signal interpretation, evaluated across baseline and mid-campaign resource event conditions including budget reductions, timeline cuts, and combined disruptions. Our results show that mixed allocation strategies accumulate substantially more mutual information than the exploitation-focused baseline at a proportionally smaller cost to hypervolume and optimization speed, with adaptive strategies outperforming a fixed-mixed allocation policy by adjusting their allocation in response to both evolving campaign statistics and resource constraints. These findings suggest that adaptive resource allocation offers a favorable tradeoff for materials discovery campaigns in reducing predictive uncertainty on Pareto-optimal compositions.

0.23

SteelAgent: LLM-Orchestrated, Physics-Informed Steel Property Prediction with Audited Generalization and Calibrated Uncertainty

cs.LG cond-mat.mtrl-sci ·2026-11-03 ·Aleksandr Volkov, Roman Sultimov, Mikhail Kuzin, Yury Maximov
top venue similarity 0.60
Abstract · 10 pages, 3 tables. A shorter version of this work was published in the Proceedings of the Thirty-Fifth International Joint Conference on Ar…

Steel property models can perform well on random test splits even when they extrapolate poorly to unfamiliar alloys. SteelAgent couples metallurgical descriptors and machine-learning models with a language-model interface for property prediction, uncertainty reporting and inverse design. We examine how the choice of held-out unit changes the conclusions drawn from SteelBench tensile-strength evaluations. For gradient boosting, pooled out-of-fold $R^2$ fell from 0.859 on a random split to 0.113 when steel families were held out. Empirical coverage of nominal 90% prediction intervals ranged from 91.0% under random splitting to 37.6% on held-out sources. The effect of physics-derived features depended on the evaluation. They increased gradient-boosting $R^2$ by 0.2534 in a 17-family holdout analysis and decreased it by 0.358 in a separate four-grade laboratory analysis. We report group-level errors and a synthetic regression experiment illustrating how calibration can deteriorate on held-out groups. These results motivate reporting the evaluation population alongside a property estimate or compliance score.

0.46

Which alloy composition,what process parameters? Inferring the recipe from optimized metallic microstructure and texture

cs.AI cond-mat.mtrl-scics.CE ·2026-10-06 ·Mahish K. Guru, Jan Bohlen, Louam Lemjid, Marius Tacke, Roland Aydin +1 more
similarity 0.56
Abstract

The mechanical properties of a metallic alloy are set by its microstructure and texture: the size and shape of its grains and the orientation of their crystals. That structure is in turn set by a recipe, the alloy composition together with the processing parameters. Alloy development runs this chain forwards, tuning the structure until a target property is met. Running it backwards, from an optimized structure to the recipe that would produce it, still relies on expert knowledge. We ask whether this backwards step can be learned. On an in-house dataset of 107 magnesium alloy extrusion conditions across 14 alloys, each with optical micrographs and an X-ray texture measurement, we compare three descriptors of microstructure and texture: conventional grain and texture statistics, a vision embedding from a pretrained image encoder, and a graph neural network on the grain network. Each is paired with prediction heads for two tasks: the alloy composition given the process (Task A), and the process parameters given the composition (Task B). Under 5-fold cross-validation, the conventional descriptors identify the correct alloy for 65% of held-out conditions, against 17% for always guessing the most common alloy, while the learned embeddings stay below 30%. The process parameters are recoverable but noisier: compared with using the composition alone, the microstructure roughly halves the temperature error. Because only a few alloys were cast and only a few press settings were used, both answers are discrete, and heads that pick from these known options, while respecting their order, worked better than heads that predict a free value.

0.27

LLMs as Acquisition Policies for Finite-Pool Materials Optimization: A Controlled Study

cs.AI ·2026-08-20 ·Dino-Rober Demir, Florian Le Bronnec, Rio Yokota
similarity 0.55
Abstract

Discovering materials with desirable properties often requires searching large candidate spaces while experimental or computational evaluations remain costly. Active learning addresses this challenge by using previous observations to select which candidate to evaluate next, typically through probabilistic surrogate models. We investigate whether open-weight large language models (LLMs) can serve as standalone acquisition policies in this setting. We evaluate five LLMs across four retrospective finite-pool materials optimization tasks under different candidate-presentation strategies and compare them with random selection and conventional Gaussian-process methods. LLM policies generally reach the global optimum in fewer iterations than random selection, indicating that they provide a useful acquisition signal without task-specific training. Their performance relative to Gaussian-process methods is mixed: conventional acquisition performs better on most tasks, while LLMs match or outperform it in some settings. Performance varies substantially across tasks, models, initializations, and candidate presentations, with no LLM approach performing best across all tasks. Overall, open-weight LLMs show potential as acquisition policies for finite-pool materials search, although their reliability remains sensitive to the task and to how candidates and scientific context are presented.

0.20

On the Brittleness of Maximum Likelihood Estimation for Gaussian Process Hyperparameter Optimization

cs.LG stat.MLstat.ME ·2026-08-13 ·Tyler R. Johnson, Kian Ben-Jacob, Christopher P. Muller, Ramin Bostanabad
code/data similarity 0.53
Abstract · 26 pages, 10 figures, 2 tables

Machine learning (ML) has become an indispensable part of modern engineering design workflows. A crucial step in training an ML model is the selection of the loss function which can be systematically formulated via various techniques such as maximum likelihood estimation (MLE) and cross-validation . While MLE is one of the most popular, effective, and intuitive mechanisms for training ML models, it is brittle: if the assumptions underpinning it are not met, the trained ML model may generalize poorly. This brittleness affects even Gaussian processes (GPs) which are widely used in engineering design and are often (incorrectly) presumed to be very robust to overfitting. In this paper, we fundamentally evaluate the brittleness of MLE in the context of training GPs for probabilistic regression or classification tasks. We compare theoretically grounded metrics against MLE and propose practical solutions. Our extensive studies demonstrate the effectiveness of our solutions in downstream design tasks such as Bayesian optimization and provide a blueprint for practitioners to build accurate and robust GPs that can even outperform tabular foundation models in terms of prediction accuracy, uncertainty quantification, and inference cost. Our contributions are publicly available via GitHub at https://github.com/Bostanabad-Research-Group/GP-vs-TabPFN-vs-GPyTorch.

0.30

Data-Driven Modeling of Molten Chloride Corrosion Using Static Test Data

cs.LG cond-mat.mtrl-sci ·2026-11-04 ·Md Mahmudul Hasan Pathik
similarity 0.53
Abstract

Molten chloride corrosion has been studied for decades, yet reliable prediction across different alloys, salts, and test conditions remains difficult. In this work, 291 static molten chloride corrosion experiments reported in the literature were compiled into a structured dataset and used to develop an interpretable machine-learning framework for corrosion-rate predictions. To better represent the differences in salt condition across studies, a Chloride Salt Preparation Index (CSPI) was introduced to bring the reported salt-treatment method, atmosphere control, and pre-exposure impurity condition on a common numerical scale. A blended tree-based ensemble provided the most consistent predictive performance, achieving a cross-validated \(R^2\) of 0.85 and an MAE of 0.41 mg cm\(^{-2}\) day\(^{-1}\). The graded CSPI retained more useful information than a simple purified/unpurified classification and emerged as the dominant model descriptor. Global sensitivity and SHAP analyses further identified exposure time, temperature, and alloy chemistry as important contributors to the model predictions, with several observed trends consistent with the established molten-chloride corrosion behavior. The conformal prediction intervals were well calibrated, providing an estimate of prediction uncertainty in addition to the point prediction. Overall, the framework demonstrates that historical corrosion data can support quantitative, interpretable, and uncertainty-aware prediction when experimental context is represented explicitly, while also highlighting where more consistent reporting and targeted experiments are needed to improve future molten-salt corrosion models.

0.24

Out-of-the-Box Tabular Foundation Models for Bayesian Optimization in Materials Discovery

cs.LG stat.ML ·2026-11-09 ·Klemens Flöge, Simon Bing, Leo Grinsztajn, Eliott Kalfon, Lennart Purucker +2 more
publishedcode/datahot direction similarity 0.52
Abstract · Accepted at the AI4Mat Workshop at NeurIPS 2026. 19 pages, 12 figures, 5 tables. Code: https://github.com/PriorLabs/matsci-bo-bench

Bayesian optimization is widely used in active learning loops for materials science. Gaussian processes serve as the de-facto surrogate model family, but require task-dependent kernel choices and can lack the modeling capacity for complex relationships. Tabular foundation models (TFMs) have recently emerged as the state-of-the-art for predictive tasks on structured data, without requiring bespoke kernels or hyperparameter tuning. We evaluate two TFMs, TabPFN and TabICL, as out-of-the-box surrogate models on two standard materials science benchmarks, comparing against a large field of baselines encompassing Gaussian processes, random forests, and CatBoost. Our findings indicate that TFMs are highly competitive surrogate models across the two benchmarks, without task-specific training for active learning or GP kernel selection. Our results motivate developing TFMs further as surrogates for active learning in materials discovery.

0.54