CS Paper Radar

Data-Driven Modeling of Molten Chloride Corrosion Using Static Test Data

Md Mahmudul Hasan Pathik

cs.LG cond-mat.mtrl-sci ·submitted 2026-11-04 20:46 UTC · v1

Abstract

Molten chloride corrosion has been studied for decades, yet reliable prediction across different alloys, salts, and test conditions remains difficult. In this work, 291 static molten chloride corrosion experiments reported in the literature were compiled into a structured dataset and used to develop an interpretable machine-learning framework for corrosion-rate predictions. To better represent the differences in salt condition across studies, a Chloride Salt Preparation Index (CSPI) was introduced to bring the reported salt-treatment method, atmosphere control, and pre-exposure impurity condition on a common numerical scale. A blended tree-based ensemble provided the most consistent predictive performance, achieving a cross-validated \(R^2\) of 0.85 and an MAE of 0.41 mg cm\(^{-2}\) day\(^{-1}\). The graded CSPI retained more useful information than a simple purified/unpurified classification and emerged as the dominant model descriptor. Global sensitivity and SHAP analyses further identified exposure time, temperature, and alloy chemistry as important contributors to the model predictions, with several observed trends consistent with the established molten-chloride corrosion behavior. The conformal prediction intervals were well calibrated, providing an estimate of prediction uncertainty in addition to the point prediction. Overall, the framework demonstrates that historical corrosion data can support quantitative, interpretable, and uncertainty-aware prediction when experimental context is represented explicitly, while also highlighting where more consistent reporting and targeted experiments are needed to improve future molten-salt corrosion models.

Closest papers

Nearest neighbours by meaning across the whole index.

Generative artificial intelligence for reliable mechanistic reasoning for corrosion

cs.LG cond-mat.mtrl-sci ·2026-08-31 ·M N Bharath, R K Singh Raman, Alankar Alankar
similarity 0.62
Abstract

Corrosion accounts for approximately 4% of global GDP, and reliable prediction is essential for timely mitigation. Machine learning effectively predicts corrosion rates from composition, microstructure, and environmental variables, but cannot explain the underlying mechanisms. A reliable approach in safety-critical materials engineering requires not only accurate retrieval but also mechanistically defensible reasoning, a capability that existing factuality metrics cannot assess. This work presents a domain-adapted retrieval-augmented generation framework for corrosion knowledge synthesis, demonstrated on magnesium alloy corrosion. Three open-weight language models (Llama-3.1-8B, Qwen-2.5-7B, Mistral-7B) are fine-tuned on 3,309 expert-verified question-answer pairs from 840 peer-reviewed papers and integrated with a hybrid dense-lexical retrieval pipeline. Retrieval augmentation produces Token F1 gains of 143-194%, with system faithfulness of 0.964 and context recall of 0.988. Blind external validation on newly published literature and in-house electrochemical data confirms trend-level generalisation. Reason Map, a proposition-graph framework, is further introduced; it independently constructs directed evidence graphs from generated answers and retrieved literature, enabling systematic detection of causal direction inversions and unsupported inferential leaps that flat factuality metrics cannot expose. The modular architecture can be applied across domains, offering a generalizable blueprint for trustworthy AI-assisted knowledge synthesis to circumvent corrosion, which can also be applied to other engineering domains.

0.37

Availability-Aware Historical Feedback Learning for Electric Arc Furnace Temperature and Chemical Composition Prediction

cs.LG ·2026-11-12 ·Ahmed Shoyeb Raihan, Farzana Islam, Ashish Nimbarte, Imtiaz Ahmed
similarity 0.56
Abstract

Electric arc furnace (EAF) steelmaking plays an increasingly important role in recycled and lower-carbon steel production. However, variability in charged materials, energy input, and operating conditions makes accurate prediction of molten steel temperature and final chemical composition challenging. Intermittent or delayed measurements limit the information available for timely prediction. This study develops an availability-aware historical-feedback learning framework for predicting EAF endpoint temperature and the final concentrations of twelve chemical elements. Eight industrial data sources are integrated into three progressively enriched predictor representations comprising 19 static, 39 temporal, and 47 history-informed features. Historical outcomes are incorporated only when eligible under an assumed 60-minute measurement-release delay. Using 19,738 temperature heats and 3,341 chemistry heats, twelve tuned regression algorithms are evaluated through chronological forward validation. The proposed historical-feedback representation reduces root mean squared error (RMSE) in 147 of 156 matched algorithm-target comparisons. For temperature prediction, ExtraTrees achieves an RMSE of 12.290 degrees C, representing a 5.54 percent reduction compared with its temporal-only counterpart. Historical-feature ablation and feedback-delay sensitivity analyses demonstrate the importance of recent outcome information and its availability. In a separate retrospective later-period evaluation, lightweight adaptive residual correction reduces temperature RMSE from 12.502 to 12.275 degrees C without retraining the underlying model. Exploratory deep learning comparisons and target-specific feature-attribution analyses provide additional insights into predictive behavior. The results establish historical outcome availability and sequential feedback as important considerations for EAF endpoint prediction.

0.23

SteelAgent: LLM-Orchestrated, Physics-Informed Steel Property Prediction with Audited Generalization and Calibrated Uncertainty

cs.LG cond-mat.mtrl-sci ·2026-11-03 ·Aleksandr Volkov, Roman Sultimov, Mikhail Kuzin, Yury Maximov
top venue similarity 0.55
Abstract · 10 pages, 3 tables. A shorter version of this work was published in the Proceedings of the Thirty-Fifth International Joint Conference on Ar…

Steel property models can perform well on random test splits even when they extrapolate poorly to unfamiliar alloys. SteelAgent couples metallurgical descriptors and machine-learning models with a language-model interface for property prediction, uncertainty reporting and inverse design. We examine how the choice of held-out unit changes the conclusions drawn from SteelBench tensile-strength evaluations. For gradient boosting, pooled out-of-fold $R^2$ fell from 0.859 on a random split to 0.113 when steel families were held out. Empirical coverage of nominal 90% prediction intervals ranged from 91.0% under random splitting to 37.6% on held-out sources. The effect of physics-derived features depended on the evaluation. They increased gradient-boosting $R^2$ by 0.2534 in a 17-family holdout analysis and decreased it by 0.358 in a separate four-grade laboratory analysis. We report group-level errors and a synthetic regression experiment illustrating how calibration can deteriorate on held-out groups. These results motivate reporting the evaluation population alongside a property estimate or compliance score.

0.46

Sample-efficient prediction of high-entropy alloy strength through outcome-aware robust sequential learning

cs.LG ·2026-11-13 ·Ahmed Shoyeb Raihan, Md Habibor Rahman, Ashish Nimbarte, Imtiaz Ahmed
similarity 0.53
Abstract

Accurate prediction of high-entropy alloy (HEA) strength can guide composition and processing decisions; however, obtaining tensile-test data for HEAs can be costly and experimentally demanding. This study proposes Robust Outcome-aware Sequential Experimentation for High-Entropy Alloys (ROSE-HEA), a sample-efficient framework for predicting ultimate tensile strength (UTS) from alloy composition and processing conditions. Its acquisition policy anticipates how possible UTS outcomes update predictions and the support for complementary Gaussian process (GP) descriptions. It then reassesses the worst-case expected predictive risk remaining across a reference domain to select informative candidates. A retrospective evaluation on 501 HEA records compares ROSE-HEA with expected-improvement (EI) and upper-confidence-bound (UCB) Bayesian optimization (BO), random GP sampling, and eight conventional regressors across 30 matched runs with shared initial observations and test conditions. Starting from 25 initial observations and acquiring 100 additional responses, ROSE-HEA achieves the lowest mean root-mean-square error (RMSE), at 152.84 MPa, and the highest mean R^2, at 0.7443. Mean RMSE is reduced by 6.16% and 6.37% relative to EI and UCB, respectively. The selected observations improve prediction across six regressor families and provide broader design-space coverage. ROSE-HEA also surpasses the strongest conventional regressor's mean predictive performance using 125 rather than 185 observations, corresponding to 32.4% fewer training observations. These findings demonstrate the potential of outcome-aware robust sequential learning to improve UTS prediction in HEAs under constrained training budgets.

0.18

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

cs.AI cs.LG ·2026-11-19 ·Rafid Enayet, Imtiaz Ahmed, Md Habibor Rahman
benchmark similarity 0.52
Abstract

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.

0.32

Differential Learning for Robust Prediction of Thermal Stability with Application to Energetic Materials

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-08-24 ·Megan C. Davis, R. Seaton Ullberg, Jeremy N. Schroeder, Andrew H. Salij, Marc J. Cawkwell +3 more
similarity 0.52
Abstract

Predicting thermal stability during handling and storage is essential for the design of safe and reliable energetic materials. However, experimental measurements vary significantly across laboratories due to differences in protocols and analysis methods, making it difficult to train reliable predictive models. We address this challenge through differential learning. Rather than predicting absolute decomposition temperatures, we instead train message passing neural networks to predict relative differences between pairs of molecules. This approach reduces sensitivity to systematic experimental errors and achieves >85% accuracy in ranking compounds by thermal stability, outperforming conventional regression methods on the same heterogeneous dataset. To understand what drives these predictions, we compare neural network models with interpretable alternatives built from descriptors derived from ab initio calculations and cheminformatics software. This analysis identifies bond dissociation enthalpy as a key determinant of thermal stability rankings, providing further insight into the complex chemistry of thermal decomposition. The differential learning framework generalizes across model architectures, from graph neural networks to classical descriptor-based approaches. Our results demonstrate that learning relative properties rather than absolute values offers a practical solution for modeling noisy experimental data, with direct applications in materials design where thermal stability predictions inform safety protocols.

0.33

Quantifying out-of-distribution data severity with Wasserstein distances: benchmarking large language models for alloy property prediction

cs.LG cond-mat.mtrl-sci ·2026-11-02 ·YuJie Liu, Dezhen Xue, Jun Sun, Xiangdong Ding, Zhibin Gao +1 more
similarity 0.52
Abstract · 23 pages, 10 figures

As general-purpose Large Language Models (LLMs), such as Gemini and DeepSeek, exhibit increasingly advanced reasoning capabilities, a critical question arises: how do their property prediction abilities compare to those of domain-specific pretrained materials models? In this study, we evaluate predictions for Ti, steels, high-entropy alloy (HEA) and Al, demonstrating that general-purpose LLMs surprisingly outperform SteelBERT, MatSciBERT, and SciBERT. To further enhance performance, we introduce a hybrid approach that utilizes numerical priors from a prior model, such as CatBoost or SteelBERT, to guide the general LLMs (Deepseek V3.1, Gemini-2.5-Flash). By inputting these initial estimates from a prior model as prompts, the LLM acts as a reasoning corrector, achieving accuracy superior to the prior model and "unguided mode". Furthermore, we investigate the impact of data strategy using a similarity-based metric, revealing that data quality dominates quantity; using merely 5% of high-similarity reference data of training set as input yields performance similar to the results of using 100% of training set. Additionally, the LLMs demonstrate excellent uncertainty calibration, where self-reported "high" confidence strongly correlates with minimal deviation from ground truth. Our findings suggest that synergizing general-purpose LLMs with prior model numerical baselines and high-quality data curation creates a cost-effective and accurate paradigm for materials discovery, reducing the need for expensive domain-specific pretraining.

0.22

Thermodynamically Consistent Neural Networks for a Universal Fluid Gibbs Free Energy Equation of State

cs.LG ·2026-11-19 ·Xurui Li, Zhiguo Gan, Jiaming Zhang, Hongxi Zeng, Diannan Lu
similarity 0.51
Abstract

Over the past three centuries, many thermodynamics researchers have worked to develop fluid equations of state with both high accuracy and broad applicability, proposing various theoretical frameworks and models. Building on these efforts, this study uses Gibbs free energy as the starting point and introduces thermodynamically consistent neural networks to construct a fluid equation of state based on Gibbs free energy (GEoS). This approach establishes a novel machine learning framework that provides a unified representation of fluid states. GEoS performs well on the vapor- and liquid-phase density test sets, with average absolute relative deviations (AARDs) of 5.25% and 3.96%, respectively. It outperforms conventional volume-translated cubic equations of state and existing machine learning models, demonstrating its effectiveness. Further analysis using the UMAP dimensionality reduction method shows that most molecules in the test set belong to extrapolation systems, confirming the strong generalization ability of the model. Finally, the test results show that the PC-SAFT equation fitted using GEoS maintains high predictive accuracy, providing a reliable basis for its practical application in industry.

0.28