CS Paper Radar

Thermodynamically Consistent Neural Networks for a Universal Fluid Gibbs Free Energy Equation of State

Xurui Li, Zhiguo Gan, Jiaming Zhang, Hongxi Zeng, Diannan Lu

cs.LG ·submitted 2026-11-19 14:35 UTC · v1

Abstract

Over the past three centuries, many thermodynamics researchers have worked to develop fluid equations of state with both high accuracy and broad applicability, proposing various theoretical frameworks and models. Building on these efforts, this study uses Gibbs free energy as the starting point and introduces thermodynamically consistent neural networks to construct a fluid equation of state based on Gibbs free energy (GEoS). This approach establishes a novel machine learning framework that provides a unified representation of fluid states. GEoS performs well on the vapor- and liquid-phase density test sets, with average absolute relative deviations (AARDs) of 5.25% and 3.96%, respectively. It outperforms conventional volume-translated cubic equations of state and existing machine learning models, demonstrating its effectiveness. Further analysis using the UMAP dimensionality reduction method shows that most molecules in the test set belong to extrapolation systems, confirming the strong generalization ability of the model. Finally, the test results show that the PC-SAFT equation fitted using GEoS maintains high predictive accuracy, providing a reliable basis for its practical application in industry.

Closest papers

Nearest neighbours by meaning across the whole index.

Differential Learning for Robust Prediction of Thermal Stability with Application to Energetic Materials

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-08-24 ·Megan C. Davis, R. Seaton Ullberg, Jeremy N. Schroeder, Andrew H. Salij, Marc J. Cawkwell +3 more
similarity 0.62
Abstract

Predicting thermal stability during handling and storage is essential for the design of safe and reliable energetic materials. However, experimental measurements vary significantly across laboratories due to differences in protocols and analysis methods, making it difficult to train reliable predictive models. We address this challenge through differential learning. Rather than predicting absolute decomposition temperatures, we instead train message passing neural networks to predict relative differences between pairs of molecules. This approach reduces sensitivity to systematic experimental errors and achieves >85% accuracy in ranking compounds by thermal stability, outperforming conventional regression methods on the same heterogeneous dataset. To understand what drives these predictions, we compare neural network models with interpretable alternatives built from descriptors derived from ab initio calculations and cheminformatics software. This analysis identifies bond dissociation enthalpy as a key determinant of thermal stability rankings, providing further insight into the complex chemistry of thermal decomposition. The differential learning framework generalizes across model architectures, from graph neural networks to classical descriptor-based approaches. Our results demonstrate that learning relative properties rather than absolute values offers a practical solution for modeling noisy experimental data, with direct applications in materials design where thermal stability predictions inform safety protocols.

0.33

A Hierarchical Synergistic Deep Learning Framework Integrating Composition, Structure, and Ionic Transport for Solid-State Electrolyte Discovery

cs.AI cond-mat.mtrl-scics.LG ·2026-08-26 ·Hongwei Du, Dingyang Lv, Baole Wei, Yongheng Li, Feng Yu +3 more
similarity 0.60
Abstract · 22 pages, 8 figures, 1 table

Inorganic solid-state electrolytes must combine high room-temperature ionic conductivity, a wide electrochemical window, excellent electronic insulation, and favorable mechanical compliance. Single models struggle to support reliable multi-objective screening across vast chemical spaces because of training-data distribution mismatch, cross-property dataset heterogeneity, and scarce kinetic transport data. To overcome these limitations, we develop a hierarchical synergistic deep-learning framework that sequentially coordinates efficiency, accuracy, and reliability through four complementary modules. The in-house-developed L-G-DCNN and a multi-fidelity implementation built on DenseGNN serve as compositional and structural experts for thermodynamic coarse screening and multi-property evaluation, respectively; MatterSim and system-specific DeePMD models provide transport pre-assessment and kinetic validation. Systematic benchmarks show that each module outperforms mainstream counterparts in its task, while retrospective validation establishes dual closed-loop verification of module-level accuracy and end-to-end workflow reliability. Applied to 30,364,908 Alex/ICSD-derived candidates, the framework identifies 97 high-performance candidates with room-temperature ionic conductivities of 0.109--59.0 mS/cm, including 94 halides, one borohydride, and two oxides. Consistency with independent experimental data confirms that 76 of the 94 halides fall within reported high-conductivity structural regions. Analysis reveals that Li$^{+}$ jump-network connectivity, rather than the number of geometric Li sites, is the core determinant of room-temperature ionic conductivity. Li-defect engineering effectively enhances oxide transport, whereas the inherent rigidity of the O$^{2-}$ framework suggests a potential upper limit on oxide electrolyte performance.

0.14

Solving and Learning Navier-Stokes Dynamics with the Neural Basis Method

cs.LG physics.flu-dynmath.NA ·2026-10-23 ·Yuhe Wang, Zhu Wang, Min Wang
similarity 0.60
Abstract · 23 pages, 6 figures

Physics-informed machine learning has become a major direction in predictive modeling of fluid dynamics, combining governing physics with learned representations. Yet prevailing formulations neither guarantee that small PDE-residual losses imply small solution errors nor scale effectively with increasing problem size. Here we present the neural basis method (NBM) as a new approach for Navier--Stokes dynamics. NBM is built on a ``representation-then-projection'' principle: fixed neural bases define the representation space, while projection of the governing equations determines the expansion coefficients. The same bases define common coordinates for the parametric solution manifold, recasting operator learning as a parameter-to-coefficient mapping and enabling scalability by removing explicit spatial dependence. For incompressible flow, NBM yields a velocity-only formulation whose residual provides an a posteriori velocity-error estimate, establishing a certified, data-free training objective for coefficient learning. Theoretical analysis and numerical experiments demonstrate the accuracy, efficiency, generalization, and scalability of NBM, with substantial improvements over baselines.

0.19

Learning atomic interactions for the thermodynamics of liquid mixtures

cs.LG cs.CE ·2026-10-27 ·Marco Hoffmann, Sebastian Schmitt, Hans Hasse, Fabian Jirasek
similarity 0.60
Abstract · 30 pages, 13 figures, 1 table

Predictive models for activity coefficients, which describe the non-ideality of liquid mixtures, are foundational for process design and optimization. Group-contribution methods, such as UNIFAC, are computationally cheap and well established in process simulators. Modern machine learning models, such as HANNA, offer higher accuracy and broader applicability, but their integration into process simulation is expensive or even infeasible. In this work, we introduce COGNAC, a graph neural network that learns atom-level geometry and interaction parameters that depend on the molecular neighborhood and evaluates them in the UNIFAC framework. Trained on about 820,000 experimental data points, COGNAC achieves significantly higher accuracy than UNIFAC and HANNA for binary and multi-component mixtures, reduces error relative to HANNA by 13-63%, reliably predicts multi-phase equilibria and identifies azeotropes, yields interpretable parameters, and is strictly thermodynamically consistent. COGNAC evaluations run at a cost comparable to UNIFAC, thereby unlocking the potential of machine-learning models for process simulations.

0.27

Accurate predictions of properties of energetic materials with tabular foundation models

cs.LG ·2026-11-10 ·Vagn Krister Nes Glomsrud, Mathias Bynke, Lars Henry Berge Olsen, Dennis Christensen
similarity 0.58
Abstract

We use TabPFN, a recently developed tabular foundation model, to predict three properties of energetic materials: impact sensitivity, decomposition temperature and crystal density. Without any hyperparameter tuning, TabPFN outperforms the best published models for all three properties. It also substantially outperforms a wide range of established machine-learning models, including tuned gradient boosting (XGBoost), random forests and Gaussian processes. This holds both when the models are given hand-crafted molecular descriptors and when they are given learned representations from Chemprop's message-passing neural network. In particular, for all three properties, TabPFN applied to Chemprop's own embedding is more accurate than Chemprop's predictions. TabPFN is also among the fastest models we consider, more than an order of magnitude faster than XGBoost. As TabPFN predicts the entire distribution of the target rather than just a single value, it offers built-in uncertainty quantification, which we compare with the empirical distributions of compounds with repeated measurements. Finally, we interpret the predictions using Shapley values, which rank the features by their importance.

0.18

Physics-informed neural networks in the small-data regime: A controlled comparison with classical PDE surrogates

cs.CE cs.AImath.NA ·2026-11-09 ·Kirill Katsuba, Oleg Rudenko, Egor Bugaev, Alexander Tarakanov
similarity 0.58
Abstract

Neural surrogates for engineering models are often trained on large collections of simulated solutions. We investigate whether physics-informed neural networks (PINNs) can achieve accurate predictions from scarce labelled observations by incorporating governing equations and prescribed initial and boundary conditions. We introduce hierarchical loss weighting (H-PINN) and its gradient-direction-aware extension (HO-PINN), which adjust the emphasis on physical constraints according to higher-priority losses. Hierarchical PINNs are compared with Vanilla PINN, tuned gradient boosting, support-vector regression, and Gaussian-process regression on a heat equation and three heterogeneous two-phase-flow benchmarks. Experiments use 20--1000 labelled states and ten paired seeds. Each label is one coordinate--state observation, not a complete simulation. At least one PINN variant achieves the highest mean primary-target \(R^2\) in each interpolation and equation-assisted forecasting comparison at 20 and 50 labels. The advantage for water saturation persists across all tested budgets. Hierarchical weighting reduces variability across runs in selected settings. These results demonstrate that known physics can support accurate neural surrogate predictions from very few solution observations, at substantially higher fitting cost than the tested classical regressors.

0.22

Differentiable Hybrid Modelling for Learning and Optimising Chemical Transport Processes from Experimental Data

cs.CE cs.LGmath.NA ·2026-09-03 ·Arthur Jessop, Mohammed Alsubeihi, Ben Moseley, Ashwin Kumar Rajagopalan
similarity 0.57
Abstract

Transport models underpin the design and optimisation of chemical processes, yet their constitutive laws are typically hand-picked, their experimental initial conditions are assumed exact, and their computational cost restricts optimisation to a handful of process variables. Here we introduce a differentiable hybrid modelling framework that embeds neural networks within a GPU-accelerated population balance equation solver to discover constitutive laws and assimilate initial conditions directly from experimental crystallisation data. Using thirteen real experiments with multi-dimensional size and shape measurements, we show that treating measured initial conditions as exact yields a physically inconsistent rate law despite improved predictive accuracy, whereas assimilating them recovers a physically consistent, non-linear law and reduces trajectory error sevenfold relative to conventional modelling. End-to-end differentiability further enables gradient-based optimisation of high-dimensional operating profiles, identifying a 300-variable temperature profile that reduces crystal aspect ratio by 25% at constant mass, facilitating superior product attributes. Our framework augments, rather than replaces, mechanistic modelling, offering a general route to learning transport models from data and optimising processes with them.

0.13

Virtual Temperature Sensors in Power Transformers Using Neural Ordinary Differential Equations

cs.LG ·2026-08-13 ·Berk Hadzhamolla, Alexander Johannes Stasik, Signe Riemer-Sørensen
published similarity 0.57
Abstract

Accurate modeling and forecasting of power transformer thermal behavior are critical for reliability, asset lifetime, and optimized power system operation. Numerical approaches such as finite element methods (FEM) and computational fluid dynamics (CFD) offer high fidelity but are computationally expensive, require complex mesh generation, and are often impractical for real-time or large-scale applications, particularly when transformer geometries are unknown. Lumped-parameter thermal models are more practical but depend on transformer-specific thermal constants and may fail to capture dynamic responses under varying operating and environmental conditions. Purely data-driven machine learning methods, including artificial neural networks, convolutional neural networks, and long short-term memory (LSTM) networks, have shown success in forecasting transformer temperatures but typically require large volumes of high-quality training data and may produce physically inconsistent or uninterpretable results. This paper develops a physics-aware Neural Ordinary Differential Equation (Neural ODE) framework for forecasting transformer thermal behavior from real-world time-series data. Neural ODEs model system dynamics in continuous time, providing smooth trajectory prediction and a natural representation of continuously evolving thermal dynamics. A key contribution is the integration of simplified heat-transfer equations directly into the Neural ODE formulation. The model is evaluated across datasets from fifteen transformers in different regions of Norway with varying designs and cooling mechanisms. The results demonstrate that the developed Neural ODE framework provides a standardized, physics-aware, and robust forecasting approach for heterogeneous transformer units.

0.58