CS Paper Radar

Generalization Testing of Grid Foundation Models for Power Flow and Optimal Power Flow

Ayushi Jolotia, Parikshit Pareek

eess.SY cs.LG ·submitted 2026-11-14 06:27 UTC · v1

Abstract

There is growing interest in foundation models (FMs) for power grids, particularly for power flow and optimal power flow. Their usefulness depends on generalization accuracy, which existing works test on their own benchmarks. We propose a three-axis framework to test their generalization limits: changed admittance matrices of training grids, load levels, and unseen grids. We test GENCO, LUMINA and GridSFM against the DC baseline, alongside their reported limitations, and discuss theoretical reasons for their failures. Experiments reveal that adding a line degrades all FMs more than removing one, and longer lines eventually make LUMINA and fine-tuned GENCO worse than DC. All three degrade beyond their training load range, where the loading-voltage curve steepens. On unseen grids, LUMINA degrades sharply even inside its training range, and GridSFM fails on the grid farthest from it. Thus, beyond training conditions, FMs behave more like meta-models requiring test-time fine-tuning data and compute.

Closest papers

Nearest neighbours by meaning across the whole index.

Metamorphic testing of learned AC optimal power flow surrogates reveals representation dependence

cs.LG cs.AIeess.SYmath.OC ·2026-11-10 ·Stephen Peng, Vineet Jagadeesan Nair
top venuecode/data similarity 0.70
Abstract · Accepted to the NeurIPS 2026 Workshops on (i) Trustworthy AI Evaluation, (ii) AI Foundations for Power Grids, (iii) Tackling Climate Change …

Evaluating a learned AC optimal power flow (AC-OPF) surrogate on one grid serialization cannot show whether its accuracy depends on that encoding. We test this dependence with thirteen metamorphic relations, each specifying when a transformation is valid and how to compare its outputs. Our audit covers 17 model and pipeline configurations: two released trained checkpoints and 15 random-weight architecture or mechanism controls. Every configuration violates at least six relations, even at reporting tolerances ten times tighter or looser. For GridSFM-Open v1.1, source inspection and intermediate-tensor interventions point to an indexing bug and three noncanonical or numerically unstable preprocessing choices; a repaired checkpoint remains untested. In a separate case500 training experiment, augmentation lowers transformed-view error in three of four models and median discrepancy and constraint-violation P95 in all four. These benefits depend on the training protocol: some relations worsen, and every evaluated prediction remains AC infeasible. A GPU/CPU eigensolver mismatch accounts for most of the large raw-Laplacian-baseline gain. We recommend reporting representation consistency alongside accuracy, feasibility, and cost. These results establish neither deployment readiness nor universal invariance.

0.45

Benchmarking a Grid Foundation Model for AC Optimal Power Flow: Feasibility and Warm-Start Results on Synthetic Texas and South Carolina Grids

eess.SY ·2026-11-17 ·Tam Kemabonta, Brighton Ombuki, Vladimir Abdelnour
similarity 0.69
Abstract · 5 pages, 3 figures, 2 tables. Submitted to the 2027 IEEE PES General Meeting

Learning-based surrogates for alternating-current optimal power flow (AC-OPF) are often judged by the gap between their objective value and that of a nonlinear solver, which does not show that a prediction satisfies power balance and network limits. This paper tests whether predictions from the pretrained foundation model GridSFM-Open 1.1.0, recently released by Microsoft, are feasible AC-OPF operating points and whether they are useful initial values for a nonlinear solver. The model was evaluated zero-shot and after fine-tuning on 10, 100, and 1,000 labeled scenarios (FT10, FT100, and FT1000) on 500 scenarios for each of two synthetic grids, ACTIVSg2000 (Texas) and ACTIVSg500 (South Carolina), with Ipopt, MATPOWER MIPS, and pandapower PIPS as solver references. The lowest Texas median cost gap, 0.44\% for FT100, coincided with thermal violations in 24.1\% of cases and a median maximum bus power mismatch of 89 MW and 197 Mvar. Texas zero-shot predictions had a median maximum mismatch of 648 MW and 1,641 Mvar, and every South Carolina case violated a thermal limit for every model variant. Seeding Ipopt with FT1000 predictions gave geometric-mean solve-time speedups of 1.55x on South Carolina and 1.12x on Texas (p = 0.06, not significant at the 5\% level), while zero-shot seeds slowed South Carolina solves (0.26x). A small objective gap therefore did not indicate feasibility: although median zero-shot inference took only 1.32 s on Texas and 0.157 s on South Carolina on a shared host, every prediction still required a nonlinear solver, and fine-tuned predictions gave modest, grid-dependent warm-start speedups while zero-shot predictions slowed convergence on one grid. GridSFM may therefore be useful for initializing a nonlinear solver, but obtaining feasible AC-OPF solutions still required the solver.

0.32

Learning by Examples: Power Grid Steady State Analysis with a Tabular Foundation Model

cs.LG ·2026-10-14 ·Olayiwola Arowolo, Oluwadara Adedeji, Peter Palensky, Jochen L. Cremer
similarity 0.69
Abstract · 12 pages, 8 figures, under review

Foundation models have shown strong generalization across scientific domains, but their use in power systems remains largely task-specific. We investigate whether a pretrained tabular foundation model (TFM), TabPFN, can serve as a general-purpose neural solver for power grid steady-state analysis. We evaluate the TFM on three tasks: power flow (PF) prediction, N-k contingency screening (NCS), and voltage stability margin (VSM) prediction. We performed experiments on 118- and 2000-bus systems, comparing the TFM against task-specific neural baselines. Without retraining or fine-tuning, the TFM matches or outperforms the best task-specific model in several settings across the three tasks. For 118-bus PF prediction, a variant of the TFM achieves errors of $1\times 10^{-3}$ pu for voltage magnitudes and $0.30^\circ$ for voltage angles, outperforming all baselines. On unseen N-1 contingency and close-to-infeasible PF cases, the TFM is competitive with the DCPF approximation. For millions of unseen N-2 contingencies, the TFM achieves AUCs of 0.92 and 0.95 for branch and voltage violation screening, respectively. The TFM also attains accurate VSM prediction performance for the 2000-bus system with limited labelled data. The TFM attains strong results across the tested tasks despite pretraining without any power-system-specific dataset and requiring no fine-tuning step. These results offer a glimpse into the potential of pretrained TFMs as a neural solver for a range of power grid analysis tasks.

0.15

Physics-Aware Distillation of a Grid Foundation Model for Real-Time Edge Inference

cs.LG ·2026-10-15 ·Vlad Alexandru Sănduleac, Shahariya Rasheed Rayamarakkarveettil Puthanpurayil, Noman Khan, Remus Teodorescu
benchmark similarity 0.66
Abstract

Grid foundation models (GridFMs) are graph transformers pretrained on a masked power-flow objective, and evaluate power flow orders of magnitude faster than an iterative solver. Their size, however, targets data-centre inference, whereas low-inertia operation increasingly asks for inference at the edge, next to the measurement, at batch size one and within a single synchrophasor (PMU) reporting frame. We distil a 20.1M-parameter, 12-layer GridFM teacher into a 0.62M-parameter, 6-layer student, a $32.5\times$ parameter reduction at half the message-passing depth, using an objective that combines the masked power-flow loss with output, physics-residual, latent-state and attention transfer. The physics-residual term, which matches the teacher's power-residual profile, has not previously been applied to typed power-grid graphs. We evaluate on a renewable variant of the IEEE 118-bus benchmark grid in which 26 of the conventional (synchronous) generators are replaced by inverter-based renewables with battery flexibility and standardised reactive-power limits (IEEE 1547), giving $97\,529$ physically valid (AC-OPF-feasible) operating scenarios, and we ablate all eight combinations of the transfer terms, reporting accuracy against ground truth and fidelity to the teacher separately. Distillation lowers student error on all four predicted quantities, by up to $48\%$ on active-power dispatch, and every distilled student is more accurate than its teacher on reactive-power dispatch. The gain is largely carried by the output matching term. The physics-residual term, in the layer-aggregated form used here, is consistently harmful, which we attribute to the spatial averaging it applies to a bus-level residual field. The resulting student is $32.5\times$ smaller in parameter count and has half the message-passing depth, making it a candidate for subsequent edge-device benchmarking.

0.40

Physics-Informed but Not Physics-Consistent: Error Geometry and Subspace Projection for Neural AC Power Flow

cs.LG cs.AI ·2026-10-05 ·Changhun Kim, Timon Conrad, Redwanul Karim, Karan Pahlajani, Julian Oelhaf +5 more
code/data similarity 0.66
Abstract · ICASSP 2027 submitted; 3 figures, 3 tables. Code: https://github.com/Kimchangheon/neural-acpf-error-geometry

Recent neural power-flow solvers, including emerging foundation models, achieve accurate voltage predictions, yet such accuracy does not necessarily imply physically consistent solutions. Even small complex voltage errors can yield large AC power-balance residuals. We study this accuracy-consistency gap across PIGNN-GC, GridSFM, gridfm-graphkit, and LUMINA on realistic 2224-bus Great Britain network (GBnetwork) scenarios, with cross-grid evaluation of GridSFM over 31 systems. Using a singular value decomposition (SVD) basis fitted to training AC power-flow solutions, we find that neural prediction errors contain substantial components outside the dominant solution subspace. To address this mismatch, calibrated solution-subspace projection (CSP) suppresses off-subspace prediction components after train-only bias calibration, reducing Mean PB by 67.0%, 37.8%, 40.5%, and 68.9% for PIGNN-GC, GridSFM, gridfm-graphkit, and LUMINA, respectively, relative to calibrated predictions, while improving voltage-magnitude accuracy in all four models. These results identify output-error geometry as an important factor in physics-consistent neural AC power flow. Code: https://github.com/Kimchangheon/neural-acpf-error-geometry

0.34

Extending Grid Foundation Models for Phasor-Domain Dynamic Simulation

eess.SY cs.LG ·2026-11-06 ·Boyang Zhao, Yifan Zhou, Alban Puech, Tilman Bockhacker, Hendrik Hamann
similarity 0.64
Abstract

Grid Foundation Models (GridFMs) are emerging as a powerful framework for learning and transferring knowledge across power grids and grid analysis tasks. This work extends GridFMs from steady-state analysis to dynamic simulation. We present DynGridFM, which uses component-wise tokenization and a structured latent operator to learn shared dynamic representations across heterogeneous grids and enable transfer to unseen systems. Pretrained on nine grids, DynGridFM is adapted to a held-out 48-machine grid, where fine-tuning on 64 trajectories achieves accuracy comparable to training from scratch on 128. On a single GPU, it achieves 924x to 1232x speedup over numerical simulators on one CPU core.

0.26

GridForge: A Tractable Network-Flow Method for Constructing Open, Continental-Scale Synthetic Power Grids

eess.SY ·2026-11-12 ·Jonathan M. Snodgrass, Thomas J. Overbye, Christopher L. DeMarco, Bernard C. Lesieutre
similarity 0.63
Abstract · 30 pages, 10 figures, 7 tables; supplementary material as an ancillary file. Submitted to the International Journal of Electrical Power & En…

The goal of this paper is to construct open, continental-scale synthetic transmission grids with an optimization method that stays tractable. Security restrictions keep models of the real grid out of open research and machine-learning datasets, and optimization-based construction is hard at scale: the number of candidate lines grows combinatorially, so electrically faithful methods prune the candidates in advance. This paper presents GridForge, which keeps every bus pair within physical length limits as a candidate, selects lines with Garver's length-weighted network-flow linear program instead of binary decisions, and resizes them with a sequential direct-current (DC) power flow. Two stages of 13 regional networks are evaluated. Their node-degree distributions are nearly as strongly log-linear as those of the real Eastern and Western Interconnections ($R^2$ of 0.92 to 0.98 against 0.971 and 0.981), although the areas under the fitted lines differ from the real ones by 39.9% on average. On the upper Midwest and Tennessee Valley footprints, resizing lowers the DC power-flow loss from 5.89% to 4.14% and from 14.55% to 7.05%, and the DC optimal power-flow loss from 4.03% to 2.02% and from 5.54% to 2.47%. Without relaxing any line limit, the DC optimal power flow is feasible in 78.81% and 0.82% of the scenarios. Most lines are built at 69 kV. The models span 250 to 78,484 buses, were built on single machines, and are freely redistributable.

0.62

GENCO - A Unified Neural Solver Embedded in a Development Framework for Steady-State Grid Analysis

cs.AI ·2026-08-10 ·Alban Puech, Matteo Mazzonelli, Tamara R. Govindasamy, Mangaliso Mngomezulu, Héctor Maeso-García +17 more
code/datahighly cited similarity 0.63
Abstract

Foundation models are transforming business workflows and boosting productivity, yet they remain largely absent from engineering domains such as power system analysis, where strict physical consistency must be enforced. We present GENCO (GEometric Neural Corrective Optimizer), a unified neural solver for steady-state transmission grid analysis that handles power flow (PF), optimal power flow (OPF), and state estimation (SE) within a single architecture and shared grid representation. To support advances in neural power system solvers, we introduce the open-source GridFM Development Framework, which standardizes synthetic data generation and training in a low-code environment. We also release large-scale datasets with millions of PF and OPF scenarios across diverse grid topologies to support reproducible benchmarking. We evaluate GENCO on the PFDelta and OPFData benchmarks against state-of-the-art neural solvers and classical solvers, including Newton-Raphson and IPOPT, as well as on real-world Hydro-Québec SCADA data. For large-scale PF, GENCO recovers the full AC operating state, including voltage magnitudes and reactive power that DC-PF cannot provide, while matching DC-PF-level active power-balance residuals. It achieves up to 30x speedups over Newton-Raphson at only 2x the runtime of DC-PF. For OPF, it achieves up to 85x speedups over IPOPT while improving feasibility, optimality, and runtime over DC-OPF. For SE, GENCO is more robust than classical weighted least squares to noisy measurements and grid parameter errors, and always returns a high-quality estimate even when weighted least squares fails to converge. Together, the unified architecture and development framework provide a new approach to large-scale steady-state grid analysis, lowering the barrier to entry for power system engineers and marking a step toward Grid Foundation Models.

0.60