CS Paper Radar

AcousticBEV: Acoustic BEV Object Localization for Intelligent Vehicles

Ziang Liu, Shiming Wang, Joseph Adeola, Julian F. P. Kooij

cs.CV cs.RO ·submitted 2026-11-14 12:42 UTC · v1
datasethot direction

Abstract

Modern autonomous driving and driver assistance systems rely predominantly on cameras, radars and LiDARs for environmental perception. However, these modalities face different environmental limitations, including poor illumination for cameras and adverse weather for LiDAR. Acoustic sensing, particularly using microphone arrays, could provide complementary perception capabilities for autonomous driving, but has remained largely underexplored. In this work, we design a horizontally arranged microphone array that functions as the "ears" of a vehicle, enabling localization of nearby moving vehicles in a bird's-eye view (BEV) representation that captures both their relative direction and distance. Using this array, we collect a real-world driving dataset, AcousticScenes, which contains 2,117 static and 2,863 dynamic samples with synchronized spatial acoustic signals, LiDAR point clouds and 3D bounding box annotations. Building on this dataset, we propose AcousticBEV, a learning-based method for acoustic BEV object localization, which estimates the center locations of moving traffic participants in BEV from the microphone-array signals, conditioned on the ego vehicle's own speed. Experimental results demonstrate that AcousticBEV outperforms both classical signal-processing baselines and other learning-based methods, achieving F1 scores of $47.7 \pm 1.2$% on "Easy" scenarios and $45.1 \pm 1.4$% on "Difficult" cases. Our findings demonstrate that acoustic signals from a low-cost, vehicle-mounted microphone array can localize nearby moving vehicles in both azimuth and distance.

Comment
Ziang Liu and Shiming Wang have equal contributions. Shiming Wang is the project lead

Closest papers

Nearest neighbours by meaning across the whole index.

Spatio-Temporal Calibration of a Vehicle-Mounted Microphone Array for Autonomous Driving

cs.SD eess.AS ·2026-11-10 ·Marvin Seegert, Richard Taupitz, Korbinian Moller, Johannes Betz
similarity 0.75
Abstract · Submitted to IEEE ICRA 2027

Microphones let an autonomous vehicle sense into areas its cameras and LiDAR cannot see, by picking up the sound that other traffic participants emit. Locating those sources and fusing them with the visual perception requires the microphone array to be calibrated and registered relative to the vehicle's other sensors. Existing calibration methods assume small, unobstructed indoor rigs, whereas a vehicle body casts an acoustic shadow that straight-line propagation cannot represent, and to our knowledge no calibration of an array distributed around a vehicle has been reported. We propose a pipeline that uses a balloon burst as a single cross-modal target, which the LiDAR locates in metric coordinates, every microphone hears as a sharp onset and a camera times. Each observation is weighted by its own timing variance, which discounts shadowed arrivals instead of discarding them and needs no model of the vehicle. On a full-size vehicle with eight microphones over a 4.9 m aperture, the held-out range residual of 6.37 cm approaches the 6.07 cm floor set by the onset timing noise, and the calibrated array tracks a moving source to within a few degrees of the vehicle's own LiDAR. A dozen bursts spread around the vehicle suffice, and spreading them matters more than adding more.

0.29

Supervising Sound Localization by In-the-wild Egomotion

cs.CV cs.AIcs.MMcs.SD ·2026-10-01 ·Anna Min, Ziyang Chen, Hang Zhao, Andrew Owens
top venuehighly cited similarity 0.63
Abstract · CVPR 2025 Highlight (IEEE/CVF Conference on Computer Vision and Pattern Recognition)

We present a method for learning binaural sound localization using egomotion as a supervisory signal. Over the course of a video, the cameras direction to a sound source will change as the camera moves. We train an audio model to predict sound directions that are consistent with visual estimates of camera motion, which we obtain using traditional methods from multi-view geometry. This provides a weak but plentiful form of supervision that we combine with traditional binaural cues. To evaluate this method, we propose a dataset of real-world audio-visual videos with egomotion. We show that our model can successfully learn from real-world data and that it performs well on sound localization tasks

0.72

Predictive audio representations for early detection and tracking of hidden dynamic objects

cs.SD cs.AIeess.AS ·2026-09-11 ·Katerina Vinciguerra, Moritz Brandes, Danilo Hollosi, Letizia Marchegiani
code/data similarity 0.62
Abstract · 8 pages, 2 tables, 6 figures

Predicting potential dangers is core to safety. Forecasting the presence of other traffic agents is core to danger prediction. Occluded traffic agents challenge detection systems as they might become visible too late, leaving the autonomous vehicle too little time to identify, plan and act accordingly in a robust and safe way. Previous works proved that auditory perception, being omnidirectional and not constrained by a field-of-view, provides fundamental cues for early spotting of different road users, even when hidden by other vehicles or infrastructures. Yet, those contributions deal with scenarios with only one vehicle present, and they either identify the type of vehicle or estimate its direction of arrival. In this work, we move forward, and propose a multi-task system which, simultaneously, estimates the number of vehicles present, their type, and their direction of arrival. Our methodological contribution is a two-stage pipeline: a self-supervised pre-training stage inspired by the Joint- Embedding Predictive Architecture (JEPA) applied directly to multichannel raw waveforms, followed by supervised multi-task fine-tuning with a bidirectional LSTM and three classification heads. The pre-training stage trains the encoder without labels, pushing it to predict the latent representation of a future audio segment from its past context. To train and test our framework, since no suitable dataset was publicly available, we collected an ad-hoc one covering Non-Line-Of-Sight scenarios with multiple traffic agents simultaneously operating. Experimental evaluation shows that our method outperforms the state of the art; it also proves that our design choice allows the model to learn robust representations, which can be transferred to an unseen driving scenario, maintaining reasonable and stable performance.

0.47

Neural Array-Generic Direction-of-Arrival Estimation Exploiting Array Transfer Functions

eess.AS ·2026-08-10 ·Mikko Heikkinen, Archontis Politis, Konstantinos Drossos, Tuomas Virtanen
published similarity 0.62
Abstract · Accepted for publication in IWAENC 2026

Direction-of-arrival (DoA) estimation is a key component of multichannel audio processing, yet many deep learning approaches remain tied to the microphone arrays used during training and generalize poorly to unseen devices. This paper proposes an array-generic neural DoA estimation framework using measured or simulated complex directional array transfer functions (ATFs) matched to real-world multi-microphone devices. The method processes multichannel spectrograms and ATF metadata with separate convolutional encoders, fuses the resulting representations through cross-attention, and predicts source directions using a multi-source Cartesian vector output formulation. Experiments on simulated 2D and 3D localization tasks under reverberation and diffuse babble noise show that the proposed approach generalizes to previously unseen arrays, including mobile-phone-like configurations, without major performance degradation, while remaining competitive with conventional and learning-based baselines.

0.49

AevaScenes: An FMCW LiDAR Dataset and Benchmark for Long-Range Perception

cs.CV cs.RO ·2026-09-27 ·Gautham Narayan Narasimhan, Heethesh Vhavle, Kumar Bhargav Viswanatha, James Reuther, Deva Ramanan
benchmarkdatasetcode/data similarity 0.62
Abstract · Project page: https://scenes.aeva.com

FMCW LiDAR measures per-point radial Doppler velocity alongside range, providing a motion cue unavailable in conventional time-of-flight sensors. Exploiting this signal at long range remains understudied. We present an FMCW LiDAR dataset of 575 sequences (57.5K frames) with over 8 million annotated 3D boxes across 16 detection classes and per-point labels across 24 semantic classes, captured by six commercial FMCW LiDAR sensors and six paired 4K cameras across eight Bay Area cities, including 237 nighttime sequences, with annotations extending to 400m. We define a benchmark with three tasks: 3D object detection, scene flow estimation, and semantic segmentation. Detection and scene flow are evaluated across three range bins to 400m, with a public evaluation server. We explore the impact of Doppler measurements on flagship recognition tasks, and find significant improvements up to 2X in detection AP of far-away vehicles and pedestrians, particularly in low-latency single-frame settings. We similarly find scene flow accuracy is significantly improved with Doppler measurements across all ranges. Our dataset and benchmark have been publicly released at https://scenes.aeva.com.

0.47

MM-BEV: Enhancing Timeliness by Computing Where and When it Matters

cs.RO cs.CVcs.DCeess.SY ·2026-08-15 ·Liangkai Liu, Kang G. Shin
similarity 0.61
Abstract · 12 pages, 20 figures

Multimodal bird's-eye-view (BEV) perception combines LiDAR depth accuracy with dense camera semantics, but its high computational cost and imperfect sensing conditions make real-time deployment challenging. Existing methods largely compress individual detectors and overlook three opportunities: structured sparsity within camera and LiDAR inputs, timing misalignment between modalities, and the fact that many detected objects do not affect the planner's immediate action. We present MM-BEV, a real-time multimodal BEV system guided by a simple principle: compute where and when it matters. MM-BEV divides perception into mandatory work for safety-critical objects within braking distance of the ego vehicle and with short time-to-collision (TTC), and optional work for less urgent regions. It prioritizes mandatory work and reduces or sheds optional work under tight compute budgets. MM-BEV integrates four mechanisms: (1) a criticality-ranked temporal ROI selector based on motion-extrapolated detections from prior frames; (2) sparse, ROI-aware feature extraction using shared-shape camera crops at context-adaptive resolution and ROI-aware LiDAR voxelization; (3) a latency-aware coordinator that adapts LiDAR sweeps, image resolution, and keyframes according to scene dynamics and TTC; and (4) an asynchronous scheduler that decouples sensing from inference and skips stale frames. On nuScenes, MM-BEV reduces inference latency by 1.96x and end-to-end latency by 2.93x, with no loss in geometry-critical recall and only a 0.2 percentage-point drop in safety-critical recall. On a Clearpath Husky A300 equipped with an Ouster-128 LiDAR, BEV cameras, and a Jetson AGX Orin, MM-BEV further reduces mean latency by 2.11x, demonstrating its potential for real-world autonomous systems.

0.40

Beam-Wise Statistical Background Subtraction for Static Roadside LiDAR: A Cross-Sensor Benchmark Study

cs.CV cs.RO ·2026-08-14 ·Alexander Baumann, Marcel Vosshans, Thao Dang
publishedbenchmarkdatasetcode/data similarity 0.60
Abstract · Accepted for publication at the 2026 IEEE 29th International Conference on Intelligent Transportation Systems (ITSC), Naples, Italy, Septemb…

Background subtraction is a key preprocessing step for infrastructure-based LiDAR perception, enabling efficient isolation of dynamic traffic participants without semantic annotations. However, systematic cross-sensor evaluations and reproducible studies for static roadside LiDAR are missing. This paper presents a comparative benchmark of beam-wise statistical background subtraction for statically mounted LiDAR sensors. We formulate background estimation as a per-beam temporal modeling problem and investigate complementary statistical strategies that capture dominant as well as multi-modal background structures, combined with spatial filtering in the angular and 3D domain. To enable reproducible evaluation, we introduce HighwayScene, a new multi-LiDAR dataset recorded in a static roadside setup, and extend the public CoopScenes dataset with static/dynamic point-wise annotations. Across multiple scenes and heterogeneous sensing technologies, we demonstrate that beam-wise statistical modeling provides a robust and transferable solution. Combining lightweight per-beam models with spatial consistency filtering substantially improves precision while maintaining high recall and real-time capability. All datasets, annotations, and implementations are publicly released.

0.35

Reflection-Aware Reasoning for Non-Line-of-Sight Pedestrian Localization

cs.RO ·2026-09-23 ·Byeonggyu Park, Mingu Jeon, Seong-Woo Kim
top venue similarity 0.60
Abstract · Accepted at ECCV 2026

Reliable localization of non-line-of-sight (NLOS) pedestrians is critical for safe urban autonomous driving, yet it remains highly challenging in ego-dynamic outdoor environments, where ego-vehicle motion makes radar multipath propagation complex and noisy. In this paper, we present a reflection-aware framework for NLOS pedestrian localization with a moving ego-vehicle in outdoor testbed scenarios. Our framework fuses front-view camera images and 2D radar point clouds to infer reflection orders and reflective surface distributions in bird's-eye-view space. It then uses physics-guided ray tracing to reconstruct distorted reflection paths and localize the hidden pedestrian. We validate the framework in outdoor testbed scenarios under ego-dynamic conditions. The results demonstrate the effectiveness of the proposed framework for NLOS pedestrian localization with a moving ego-vehicle.

0.37